Skip to content

Companion repo for running examples against the luma.oled, luma.lcd, luma.led_matrix and luma.emulator display drivers.

License

Notifications You must be signed in to change notification settings

geeekpi/luma.examples

 
 

Repository files navigation

luma.core | luma.docs | luma.emulator | luma.examples | luma.lcd | luma.led_matrix | luma.oled

Luma.Examples

https://github.com/rm-hull/luma.examples/workflows/luma.examples/badge.svg?branch=master

This is the companion repo for running examples against the luma.emulator, luma.oled, luma.lcd and luma.led_matrix display drivers.

Installation instructions

Assuming you are using a Raspberry Pi (running Debian Jessie or newer), follow the pre-requisites & instructions in the above repositories to wire up your display, then from a command-line:

$ sudo usermod -a -G i2c,spi,gpio pi
$ sudo apt install python3-dev python3-pip python3-numpy libfreetype6-dev libjpeg-dev build-essential
$ sudo apt install libsdl2-dev libsdl2-image-dev libsdl2-mixer-dev libsdl2-ttf-dev libportmidi-dev

Log out and in again and clone this repository:

$ git clone https://github.com/rm-hull/luma.examples.git
$ cd luma.examples

Finally, install the luma libraries using:

$ sudo -H pip install -e .

Running the examples

After cloning the repository, enter the examples directory and try running one of the following examples listed below. For example:

cd examples
python3 3d_box.py
Example Description
3d_box.py Rotating 3D box wireframe & color dithering
animated_gif.py Renders an animated GIF
bitstamp_ticker.py Display the Bitcoin price at Bitstamp
bitstamp_realtime.py Displays the latest Bitcoin trades in realtime at Bitstamp
bounce.py Display a bouncing ball animation and frames per second
carousel.py Showcase viewport and hotspot functionality
chroma.py Trippy color rendering demo
clock.py An analog clockface with date & time
colors.py Color rendering demo
crawl.py A vertical scrolling demo, which should be familiar
demo.py Use misc draw commands to create a simple image
dotmatrixtool.py Simple demo showing how to integrate output from http://dotmatrixtool.com
font_awesome.py A meander through some awesome fonts
game_of_life.py Conway's game of life
greyscale.py Greyscale rendering demo
image_composition.py Displays different song titles and scrolls them back and forth
invaders.py Space Invaders demo
jetset_willy.py Sprite animation framework demo
larson_hue.py Alpha blending color demo
matrix.py The Matrix
maze.py Maze generator
perfloop.py Simple benchmarking utility to measure performance
picamera_photo.py Capture photo with picamera and display it on a screen
picamera_video.py Capture continuous video stream and display it on a screen
pi_logo.py Display the Raspberry Pi logo (loads image as .png)
runner.py Sprite animation framework demo
savepoint.py Example of savepoint/restore functionality
scrolling_pixelart.py Image dithering and viewport scrolling
sprite_animation.py Using sprite maps for animation effects
starfield.py 3D starfield simulation
sys_histogram.py Display system information including a rolling histogram
sys_info.py Display basic system information
terminal.py Simple println capabilities
tv_snow.py Example image-blitting
tweet_scroll.py Using Twitter's Streaming API to display scrolling notifications
video.py Display a video clip
weather.py 3-day weather forecasts from the BBC
welcome.py Unicode font rendering & scrolling

By default, all the examples will asume I2C port 1, address 0x3C and the ssd1306 driver. If you need to use a different setting, these can be specified on the command line – each program can be invoked with a --help flag to show the options:

$ python3 examples/demo.py --help
usage: demo.py [-h] [--config CONFIG] [--display DISPLAY] [--width WIDTH]
                [--height HEIGHT] [--rotate ROTATION] [--interface INTERFACE]
                [--i2c-port I2C_PORT] [--i2c-address I2C_ADDRESS]
                [--spi-port SPI_PORT] [--spi-device SPI_DEVICE]
                [--spi-bus-speed SPI_BUS_SPEED]
                [--spi-transfer-size SPI_TRANSFER_SIZE]
                [--spi-cs-high SPI_CS_HIGH] [--ftdi-device FTDI_DEVICE]
                [--framebuffer-device FRAMEBUFFER_DEVICE] [--gpio GPIO]
                [--gpio-mode GPIO_MODE]
                [--gpio-data-command GPIO_DATA_COMMAND]
                [--gpio-chip-select GPIO_CHIP_SELECT]
                [--gpio-reset GPIO_RESET] [--gpio-backlight GPIO_BACKLIGHT]
                [--gpio-reset-hold-time GPIO_RESET_HOLD_TIME]
                [--gpio-reset-release-time GPIO_RESET_RELEASE_TIME]
                [--block-orientation ORIENTATION] [--mode MODE]
                [--framebuffer FRAMEBUFFER] [--num-segments NUM_SEGMENTS]
                [--bgr] [--inverse] [--h-offset H_OFFSET]
                [--v-offset V_OFFSET] [--backlight-active VALUE] [--debug]
                [--transform TRANSFORM] [--scale SCALE] [--duration DURATION]
                [--loop LOOP] [--max-frames MAX_FRAMES]

luma.examples arguments

options:
  -h, --help            show this help message and exit

General:
  --config CONFIG, -f CONFIG
                        Load configuration settings from a file (default:
                        None)
  --display DISPLAY, -d DISPLAY
                        Display type, supports real devices or emulators.
                        Allowed values are: ssd1306, ssd1309, ssd1322,
                        ssd1362, ssd1322_nhd, ssd1325, ssd1327, ssd1331,
                        ssd1351, sh1106, sh1107, ws0010, winstar_weh, pcd8544,
                        st7735, st7789, ht1621, uc1701x, st7567, ili9341,
                        ili9486, ili9488, hd44780, max7219, ws2812, neopixel,
                        neosegment, apa102, unicornhathd, capture, gifanim,
                        pygame, asciiart, asciiblock, linux_framebuffer
                        (default: ssd1306)
  --width WIDTH         Width of the device in pixels (default: 128)
  --height HEIGHT       Height of the device in pixels (default: 64)
  --rotate ROTATION, -r ROTATION
                        Rotation factor. Allowed values are: 0, 1, 2, 3
                        (default: 0)
  --interface INTERFACE, -i INTERFACE
                        Interface type. Allowed values are: i2c, noop, spi,
                        gpio_cs_spi, bitbang, ftdi_spi, ftdi_i2c, pcf8574,
                        bitbang_6800 (default: i2c)

I2C:
  --i2c-port I2C_PORT   I2C bus number (default: 1)
  --i2c-address I2C_ADDRESS
                        I2C display address (default: 0x3C)

SPI:
  --spi-port SPI_PORT   SPI port number (default: 0)
  --spi-device SPI_DEVICE
                        SPI device (default: 0)
  --spi-bus-speed SPI_BUS_SPEED
                        SPI max bus speed (Hz) (default: 8000000)
  --spi-transfer-size SPI_TRANSFER_SIZE
                        SPI bus max transfer unit (bytes) (default: 4096)
  --spi-cs-high SPI_CS_HIGH
                        SPI chip select is high (gpio_cs_spi driver only)
                        (default: False)

FTDI:
  --ftdi-device FTDI_DEVICE
                        FTDI device (default: ftdi://::/1)

Linux framebuffer:
  --framebuffer-device FRAMEBUFFER_DEVICE
                        Linux framebuffer device (default: /dev/fd0)

GPIO:
  --gpio GPIO           Alternative RPi.GPIO compatible implementation (SPI
                        interface only) (default: None)
  --gpio-mode GPIO_MODE
                        Alternative pin mapping mode (SPI interface only)
                        (default: None)
  --gpio-data-command GPIO_DATA_COMMAND
                        GPIO pin for D/C RESET (SPI interface only) (default:
                        24)
  --gpio-chip-select GPIO_CHIP_SELECT
                        GPIO pin for Chip select (GPIO_CS_SPI interface only)
                        (default: 24)
  --gpio-reset GPIO_RESET
                        GPIO pin for RESET (SPI interface only) (default: 25)
  --gpio-backlight GPIO_BACKLIGHT
                        GPIO pin for backlight (PCD8544, ST7735 devices only)
                        (default: 18)
  --gpio-reset-hold-time GPIO_RESET_HOLD_TIME
                        Duration to hold reset line active on startup
                        (seconds) (SPI interface only) (default: 0)
  --gpio-reset-release-time GPIO_RESET_RELEASE_TIME
                        Duration to pause for after reset line was made active
                        on startup (seconds) (SPI interface only) (default: 0)

Misc:
  --block-orientation ORIENTATION
                        Fix 90° phase error (MAX7219 LED matrix only). Allowed
                        values are: 0, 90, -90, 180 (default: 0)
  --mode MODE           Colour mode (SSD1322, SSD1325 and emulator only).
                        Allowed values are: 1, RGB, RGBA (default: RGB)
  --framebuffer FRAMEBUFFER
                        Framebuffer implementation (SSD1331, SSD1322, ST7735,
                        ILI9341 displays only). Allowed values are:
                        diff_to_previous, full_frame (default:
                        diff_to_previous)
  --num-segments NUM_SEGMENTS
                        Sets the number of segments to when using the diff-to-
                        previous framebuffer implementation. (default: 4)
  --bgr                 Set if LCD pixels laid out in BGR (ST7735 displays
                        only). (default: False)
  --inverse             Set if LCD has swapped black and white (ST7735
                        displays only). (default: False)
  --h-offset H_OFFSET   Horizontal offset (in pixels) of screen to display
                        memory (ST7735 displays only). (default: 0)
  --v-offset V_OFFSET   Vertical offset (in pixels) of screen to display
                        memory (ST7735 displays only). (default: 0)
  --backlight-active VALUE
                        Set to "low" if LCD backlight is active low, else
                        "high" otherwise (PCD8544, ST7735 displays only).
                        Allowed values are: low, high (default: low)
  --debug               Set to enable debugging. (default: False)

Emulator:
  --transform TRANSFORM
                        Scaling transform to apply (emulator only). Allowed
                        values are: identity, led_matrix, none, scale2x,
                        seven_segment, smoothscale (default: scale2x)
  --scale SCALE         Scaling factor to apply (emulator only) (default: 2)
  --duration DURATION   Animation frame duration (gifanim emulator only)
                        (default: 0.01)
  --loop LOOP           Repeat loop, zero=forever (gifanim emulator only)
                        (default: 0)
  --max-frames MAX_FRAMES
                        Maximum frames to record (gifanim emulator only)
                        (default: None)

Note

  1. python3-dev (apt-get) and psutil (pip/pip3) are required to run the sys_info.py example. See install instructions for the exact commands to use.
  2. At runtime, luma.core enumerates which display drivers are present and dynamically constructs the list of --display options, therefore (for example) the capture/gifanim/pygame options will not show unless luma.emulator is installed

Emulators

There are various display emulators available for running code against, for debugging and screen capture functionality:

  • The luma.emulator.device.capture device will persist a numbered PNG file to disk every time its display method is called.
  • The luma.emulator.device.gifanim device will record every image when its display method is called, and on program exit (or Ctrl-C), will assemble the images into an animated GIF.
  • The luma.emulator.device.pygame device uses the pygame library to render the displayed image to a pygame display surface.

After installing luma.emulator you can invoke the demos with:

$ python3 examples/clock.py --display pygame

or:

$ python3 examples/clock.py --display gifanim

$ python3 examples/starfield.py --display capture

Documentation

Full documentation with installation instructions can be found in:

License

The MIT License (MIT)

Copyright (c) 2017-2023 Richard Hull & Contributors

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

About

Companion repo for running examples against the luma.oled, luma.lcd, luma.led_matrix and luma.emulator display drivers.

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • Python 100.0%