[Feature] Add Bank Select LSB Support via other byte of wBank, as well as other features later

[stgiga]

So according to the SoundFont standard, the value (known as wBank) normally used to store Controller Change 0 (Bank Select MSB) is actually a 16-bit value. If we use the OTHER byte to store the Controller Change 32 (Bank Select LSB) value, we can support Bank Se]ect LSB in SF2, thus proper Yamaha XG SoundFonts, and proper DLS-to-SF2 conversions can be made. The spec says to preserve (but not play) these values should the other byte than MSB be used. Also, the second percussion toggle is a bit that OpenMPT 1.30 will respond to as a percussion toggle. I have a test-of-LSB SF2 here: https://drive.google.com/file/d/1cerpko6kL4SctyHG9ozYFtwePmbHX7CW/view as well as an attached diagram of the bits for wBank with LSB support.

Also, I have some further feature requests in a similar vein that also consist of relying on what the SoundFont specification does not explicitly say to reject.

Furthermore, the SoundFont specification says to not play SoundFonts which have the sm24 chunk (used to store the upper 8 bits of a 24-bit sample) but not the regular 16-bit sample chunk underneath. However, it does NOT tell us to reject these. So 8 bits-per-sample samples in SF2 are possible. Meaning that MOD samples-to-SF2-conversions could be outright 1:1.

In terms of priority, I would say that the 16-bit wBank part would be the best to support first. These three features are part of a project me and a collaborator have to improve the SF2 format via taking the standard completely literally.

We also rely on the spec not explicitly defining the RIFF used as 32-bit RIFF, so we have devised a RIFF64 extension, but given the differences between RIFF and RIFF64, there are some significant reworks needed, giving us room to add in features not possible on 32-bit RIFF. This 64-bit RIFF SF2 format is in its infancy and is not part of this present request.

The wBank LSB use is the feature we feel is the one that is of current most importance. The test SF2 was made by my collaborator via hex editing the wBank values in some XG-mapped patches to put them on their LSBs (Yamaha XG uses Bank Select LSB for its patch variations outside General MIDI rather than Bank Select MSB as is done in Roland GS) as is proper, while following the attached bit diagram of wBank.

This whole proposal has been in the works for months.

I know that it might seem a bit wild to do this, but having Bank Select LSB also opens the doors to more SoundFonts of other synthesizers, because a no-LSB beyond-GM synth outside Roland SoundCanvas lines in native mode is extremely rare. Furthermore, I have pitched the proposal to other people in the SoundFont player and editor community, such as FluidSynth's devs, and also Un4seen.

The gist of this proposal is that wBank LSB use is what we find to be of current most importance, but we have additional plans for later. Best wishes to everyone involved!

[davy7125]

Understood! I'll add an extra spin box before "bank number" and "preset number", at the preset level, so that we can specify:

• MSB bank number (0-128)
• LSB bank number (0-128)
• preset number (0-127)

This new field will be displayed if the opened soundfont contains at least one MSB bank number different from 0. Otherwise it will be hidden and a discrete option will enable the spin box.