SEGA GENESIS M2 Problem

[Sbrivas]

BlueRetro firmware version

24.04 h1 genesis

BlueRetro firmware specification

HW1

BlueRetro firmware variant

System specific

BlueRetro hardware type

Internal install DIY

Manufacturer

Myself

System used

SEGA MegaDrive Genesis

Bluetooth controller brand & name

ESP32 WROOM DEVKIT 40 PINS

What is problem? (only list ONE problem per report)

Hi!
I have installed BlueRetro internally on a Sega Genesis M2, one player configuration. The fw version is 24.04 h1 genesis.

The result was quite good. pairing the controller I was able to configure the 6 buttons without problem. There is no lag and each button does what it should do.
But I have only one drawback: when I press a button and the dpad, it is like the button goes into turbo mode. i.e. if I hold down B and press the D-pad down, the B button goes berserk on its own non-stop until I release the D-pad. This makes some actions difficult, such as performing a combo or moving while you have to jump.

I have reviewed the connections, soldering, and wiring diagrams several times. Everything seems fine. Like its a one player config, I have made the "bridge" between 3v3 and IO36 as indicated. The glitch persists with any controller you pair. The same thing happened with a previous version, which was v1.8.3.

I really appreciate the time you take to respond.

Greetings from Argentina!

What did you expect to happen?

I would like that when I hold down a button, while pressing, for example, a direction on the d-pad, the previous button does not go into "turbo mode". That is, the entry does not begin to be repeated.

Exemplifying:
In Mortal Kombat the A button is for low blow, if I hold down the d-pad down at the same time, the low blow starts to repeat continuously.

Attach files like logs or Bluetooth traces here

No response