Skip to content

daniellustig/pipecheck

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

3 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

PipeCheck

PipeCheck is a methodology and automated tool for verifying that a particular microarchitecture correctly implements the memory consistency model defined by the architectural specification.

Citing PipeCheck

If you use PipeCheck in your work, we would appreciate it if you cite our paper:

Daniel Lustig, Michael Pellauer, and Margaret Martonosi. "PipeCheck: Specifying and Verifying Microarchitectural Enforcement of Memory Consistency Models", 47th International Symposium on Microarchitecture (MICRO), Cambridge UK, December 2014.

Contacting the authors

If you have any comments, questions, or feedback, please contact Daniel Lustig at [email protected], or visit our GitHub page, github.com/daniellustig/pipecheck.

Status

At this point, PipeCheck is a research tool rather than an industry-strength verification toolchain. We do appreciate any suggestions or feedback either in approach or in implementation. If you are interested in any particular feature, missing item, or implementation detail, please contact the authors and we will try to help out as best we can.

Building and Using PipeCheck

Prerequisites

PipeCheck is written in Coq and extracted to OCaml for compilation to a native executable. PipeCheck requires Coq (v4.0 or later) and OCaml (tested on versions 8.4pl3 and 8.4pl5). The authors have compiled and executed PipeCheck successfully on both Linux and Mac.

Optionally, the PipeCheck results can be visualized using the dot tool. The authors have tested dot version 2.36.

PipeCheck reuses some data structures from the CAV 2010 Weak Memory Model analysis framework developed by Jade Alglave. These structures are contained within the file wmm.v. The complete CAV 2010 framework is available at http://www0.cs.ucl.ac.uk/staff/j.alglave/wmm

Using PipeCheck As-Is

  1. Make sure ocamlc and coqc (and dot if desired) are in your PATH.
  2. make
    • This compiles PipeCheck, extracts it to OCaml, and compiles the extracted OCaml code into native binaries.
  3. make graphs
    • This executes the PipeCheck tool on the pre-defined pipelines. To test individual pipelines, execute the following:
      • ./print_<pipeline name>_graphs.native
  4. make results
    • This checks the PipeCheck results against the expected behaviors, and highlights any mismatches (be they stronger or weaker than expected).
  5. (Optional) make pdf
    • This converts all of the results into PDFs using dot. At this point, the layout of the graphs is chosen entirely by the dot tool, so the layout may not always be as pretty as it could be. Individual results can be visualized by doing the following:
      • cd graphs
      • dot -Tpdf <result filename> -o <graph output filename.pdf>

Design Approach

PipeCheck is written in Coq, a theorem prover/verification assistant. For example, Coq has been used to rigorously and formally verify mathematical theorems such as the four color theorem, and it has been used to produce C compilers which provably produce correct C code. PipeCheck itself does not yet contain any verified theorems or processes. Nevertheless, we chose Coq to make for easier integration with other formal models written using Coq, and to leave open the possiblity of making PipeCheck more rigorous in the future.

In practice, we are also interested in using PipeCheck as a practical tool. For this reason, we auto-extract our code from Coq to OCaml (using built-in Coq methodology for doing so), and we compile this code to run natively. So far, we have not put much effort into optimizing for performance of this code, partially because of PipeCheck's current status as a research tool, but more importantly because we haven't yet found performance to be a bottleneck. All of PipeCheck's tests run within a few minutes even without special optimization effort, and so optimization at this point would likely be premature anyway.

Extending PipeCheck

TO DO.

For now, the easiest approach is to duplicate one of the existing pipelines, modifying stage definitions as appropriate. From there, search the code and Makefile to find all references to the original pipeline, duplicate them, and change the new entries to refer to the new pipeline.

We apologize that this process currently requires pipelines to be hardcoded. We are planning to develop an easier-to-use front end to PipeCheck in the near future. If there are any questions or thoughts, please don't hesitate to contact the authors.

Wish List

Known bugs:

  • PipeCheck PPO Verification Tests do not yet support speculative load reordering. Litmus tests do support it, however.

Planned future features:

  • Memory fences
    • and cumulative fences, for ARM/Power
  • Read-modify-write atomics
  • Nicer front end for specifying pipelines.
    • and maybe even litmus tests too.

Longer-term hopes:

  • Verify some of PipeCheck within Coq
  • Integrate PipeCheck with other external tools at different levels of the programming stack, so that we might e.g., have a complete verifiable flow from C to architecture to microarchitecture.

About

No description, website, or topics provided.

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published