README.md

Core Advancement Proposals (CAPs)

CAP Status Terms

Primary Workflow

• Draft — A CAP that is currently open for consideration and actively being discussed.
• Awaiting Decision — A mature and ready CAP that is ready for final deliberation by the CAP Core Team. After a maximum of three meetings, a vote will take place that will set the CAP's intended FCP disposition (FCP: Acceptance/Rejection) or go back into a Draft state.
• FCP: [Acceptance/Rejection] — A CAP that has entered a Final Comment Period (FCP) with an intended disposition. After one week has passed, during which any new concerns should be addressed, the CAP will head towards its intended disposition [Acceptance/Rejection] or go back into a Draft state.
• Accepted — A CAP that has been accepted on the merits of its idea pre-implementation, and is ready for implementation. It is still possible that the CAP may be rejected post-implementation due to the issues that may arise during an initial implementation.
• Implemented - A CAP that has been implemented with the protocol version specified in the CAP. It will graduate to Final when it has been formally accepted by a majority of validators (nodes) on the network.
• Final — A CAP that has been accepted by a majority of validators (nodes) on the network. A final CAP should only be updated to correct errata.

Additional Statuses

• Rejected - A CAP that has been formally rejected by the CAP Core Team, and will not be implemented.
• Superseded: [New Final CAP] - A CAP that which was previously final but has been superseded by a new, final CAP. Both CAPs should reference each other.

List of Proposals

Number	Protocol Version	Title	Author	Status
CAP-0001	10	Bump Sequence	Nicolas Barry	Final
CAP-0002	10	Transaction level signature verification	Nicolas Barry	Final
CAP-0003	10	Asset-backed offers	Jonathan Jove	Final
CAP-0004	10	Improved Rounding for Cross Offer	Jonathan Jove	Final
CAP-0005	11	Throttling and transaction pricing improvements	Nicolas Barry	Final
CAP-0006	11	Add ManageBuyOffer Operation	Jonathan Jove	Final
CAP-0015	13	Fee Bump Transactions	OrbitLens	Final
CAP-0017	-	Update LastModifiedLedgerSeq If and Only If LedgerEntry is Modified	Jonathan Jove	Accepted
CAP-0018	13	Fine-Grained Control of Authorization	Jonathan Jove	Final
CAP-0019	13	Future-upgradable TransactionEnvelope type	David Mazières	Final
CAP-0020	11	Bucket Initial Entries	Graydon Hoare	Final
CAP-0021	19	Generalized transaction preconditions	David Mazières	Final
CAP-0023	14	Two-Part Payments with ClaimableBalanceEntry	Jonathan Jove	Final
CAP-0024	12	Make PathPayment Symmetrical	Jed McCaleb	Final
CAP-0025	12	Remove Bucket Shadowing	Marta Lokhava	Final
CAP-0026	12	Disable Inflation Mechanism	OrbitLens	Final
CAP-0027	13	First-class multiplexed accounts	David Mazières and Tomer Weller	Final
CAP-0028	13	Clear pre-auth transaction signer on failed transactions	Siddharth Suresh	Final
CAP-0029	16	AllowTrust when not AUTH_REQUIRED	Tomer Weller	Final
CAP-0030	13	Remove NO_ISSUER Operation Results	Siddharth Suresh	Final
CAP-0033	14/15	Sponsored Reserve with EphemeralSponsorshipEntry	Jonathan Jove	Final
CAP-0034	14	Preserve Transaction-Set/Close-Time Affinity During Nomination	Terence Rokop	Final
CAP-0035	17	Asset Clawback	Dan Doney	Final
CAP-0038	18	Automated Market Makers	Jonathan Jove	Final
CAP-0040	19	Ed25519 Signed Payload Signer for Transaction Signature Disclosure	Leigh McCulloch	Final
CAP-0042	-	Multi-Part Transaction Sets	Nicolas Barry	Accepted

Draft Proposals

Number	Title	Author	Status
CAP-0007	Deterministic Account Creation	Jeremy Rubin	Draft
CAP-0008	Self Identified Pre-Auth Transaction	Jeremy Rubin	Draft
CAP-0009	Linear/Exterior Immutable Accounts	Jeremy Rubin	Draft
CAP-0010	Fee Bump Account	Jeremy Rubin	Draft
CAP-0011	Relative Account Freeze	Jeremy Rubin	Draft
CAP-0012	Deterministic accounts and creatorTxID	David Mazières	Draft
CAP-0014	Adversarial Transaction Set Ordering	Jeremy Rubin	Draft
CAP-0022	Invalid transactions must have no effects	David Mazières	Draft
CAP-0032	Trustline Preauthorization	Jonathan Jove	Draft
CAP-0037	Automated Market Makers	OrbitLens	Draft
CAP-0041	Concurrent Transactions	Leigh McCulloch, David Mazières	Draft
CAP-0043	ECDSA Signers with P-256 and secp256k1 Curves	Leigh McCulloch	Draft
CAP-0044	SPEEDEX - Configuration	Jonathan Jove	Draft
CAP-0045	SPEEDEX - Pricing	Jonathan Jove	Draft
CAP-0046	Soroban smart contract system overview	Graydon Hoare	Draft
CAP-0046-01 (formerly 0046)	WebAssembly Smart Contract Runtime Environment	Graydon Hoare	Draft
CAP-0046-02 (formerly 0047)	Smart Contract Lifecycle	Siddharth Suresh	Draft
CAP-0046-03 (formerly 0051)	Smart Contract Host Functons	Jay Geng	Draft
CAP-0046-04 (formerly 0052)	Smart Contract Interactions (Minimal)	Jonathan Jove	Draft
CAP-0046-05 (formerly 0053)	Smart Contract Data	Graydon Hoare	Draft
CAP-0046-06 (formerly 0054)	Smart Contract Standardized Asset	Jonathan Jove	Draft
CAP-0046-07 (formerly 0055)	Fee model in smart contracts	Nicolas Barry	Draft
CAP-0046-08 (formerly 0056)	Smart Contract Logging	Siddharth Suresh	Draft

Rejected Proposals

Number	Title	Author	Status
CAP-0013	Change Trustlines to Balances	Dan Robinson	Rejected
CAP-0016	Cosigned assets: NopOp and COAUTHORIZED_FLAG	David Mazières	Rejected
CAP-0031	Sponsored Reserve	Jonathan Jove	Rejected
CAP-0036	Claimable Balance Clawback	Leigh McCulloch	Rejected
CAP-0039	Not Auth Revocable Trustlines	Leigh McCulloch	Rejected
CAP-0048	Smart Contract Asset Interoperability	Jonathan Jove	Rejected
CAP-0049	Smart Contract Asset Interoperability with Wrapper	Jonathan Jove	Rejected
CAP-0050	Smart Contract Interactions	Jonathan Jove	Rejected

Contribution Process

The Stellar Protocol, like most software in the world, continues to evolve over time to meet the needs of our network's participants and to drive technology forward into new territory. Given the importance of the reliability and safety of the network, we ask that all of those who have ideas towards pushing Stellar's protocol development forward adhere to the following:

• Consider your idea and how it serves the fundamental goals of the Stellar Network and aligns with values of the Stellar Protocol (which are listed below). If you cannot show how your proposal aligns with those goals and values, it's unlikely to ever be implemented.
• Gather feedback from discussion on the dev mailing list and other forums, and utilize it to begin a draft proposal, otherwise known as a CAP (Core Advancement Proposal).
• Follow the proposal process listed below.

Stellar Network Goals

• The Stellar Network should be secure and reliable, and should bias towards safety, simplicity, reliability, and performance over new functionality.
• The Stellar Network should run at scale and at low cost to all participants of the network.
  • In support of this, the Stellar Network should support off-chain transactions, e.g. Starlight.
  • An explicit non-goal is limiting the hardware requirements of stellar-core to a personal computer.
• The Stellar Network should facilitate simplicity and interoperability with other protocols and networks.
  • In support of this, the Stellar Network should facilitate side-chain transactions to enable sub-networks.
• The Stellar Network should enable cross-border payments, i.e. payments via exchange of assets, throughout the globe, enabling users to make payments between assets in a manner that is fast, cheap, and highly usable.
  • In support of this, the Stellar Network should support an orderbook that values simplicity over functionality, and one that primarily serves to enable cross-border payments.
  • In support of this, the Stellar Network should facilitate liquidity as a means to enabling
  • cross-border payments.
  • In support of this, the Stellar Network should enable asset issuance, but as a means of
  • enabling cross-border payments.
• The Stellar Network should support decentralization wherever possible, but not at the expense of the majority of its values.
  • There should be no privileged actors — we should support egalitarianism and everyone participating on the same playing field.
• The Stellar Network should enable users to easily exchange their non-Stellar based assets to Stellar-based assets, and vice versa.
• The Stellar Network should make it easy for developers of Stellar projects to create highly usable products.

Stellar Protocol Development Values

• The Stellar Protocol should serve the goals of the Stellar Network.
• The Stellar Protocol should bias towards simplicity.
  • When possible, solutions should be considered outside of core protocol changes such as via SEPs (Stellar Ecosystem Proposals) to minimize complexity in the Stellar protocol.
  • When possible, proposals should minimize the impact of changes to the smallest surface area and shallowest depth (i.e. sticking to the higher levels of the software) of the protocol architecture possible to make changes predictable and easier to test and reason about. Changes should be surgical, and minimal invasive. As a result, changes that affect lower levels of the implementation have a higher bar for acceptance.
  • In order from the lowest level to the highest level systems, the systems are:
    • Historical / Ledger XDR
    • Observable Transaction Semantics
    • Consensus XDR
    • DB State
    • Overlay XDR
    • Unobservable tx semantics (eg. performance or bug fixes)
    • Horizon semantics
    • Public APIs, Client Libraries/SDKs.
• The Stellar Protocol should be clear, concise, and opinionated.
  • New operations and functionality should be opinionated, and straightforward to use.
  • There should ideally be only one obvious way to accomplish a given task.
• The Stellar Protocol should bias towards broad use cases, and bias against niche functionality.
• The Stellar Protocol should bias towards user safety.

CAP Process

These are the steps from idea to deployment on how to create a Core Advancement Proposal (CAP).

Pre-CAP (Initial Discussion)

Introduce your idea on the stellar-dev mailing list.

• Make sure to gather feedback and alternative ideas — it's useful before putting together a formal draft!
• Consider contacting experts in a particular area for feedback while you're hashing out the details.

Creating a CAP Draft

Draft a formal proposal using the CAP Template, and submit a PR to this repository. You should make sure to adhere to the following:

• Make sure to place the draft in the core/ folder.
• Your CAP should be named cap-TBD.md
• If your CAP requires images or other supporting files, they should be included in a sub-directory of the contents folder for that CAP, such as contents/cap-TBD/. Links should be relative, for example a link to an image from your CAP would be ../contents/cap-TBD/image.png.

Finally, submit a PR of your draft via your fork of this repository.

Additional Tips

• Use TBD for the protocol version. Don't assign a protocol version to the CAP — this will be established once the CAP has reached the state of Final and has been formally implemented.

Draft: Merging & Further Iteration

From there, the following process will happen.

CAP gets merged

If you properly followed the steps above, your PR will get merged.

The CAP and associated files will get renamed based on the latest CAP draft number before merging.

Assembling a working group

As your idea gets traction, you'll need to assemble a working group as to increase the chances of success that this CAP proceeds through the stages.

For more information on this, review the working group section of the CAP template.

Iterating on the CAP

You should continue the discussion of the draft CAP on the mailing list with an attempt at reaching consensus.

When opening PRs to modify the draft:

• changes have to either be submitted by one of the authors (Recommender or Owner) or signed off by the authors
• avoid discussions in the PR itself as it makes it more difficult for future contributors to understand the rational for changes.
  • best is to always discuss in the mailing list.
  • alternatively, a recap of the discussion that happened in the PR could be posted in the mailing list (but it's easy to forget to do this).

Draft -> Awaiting Decision

When your CAP received sufficient feedback from the community, you'll need to present it to a subset of the CAP Core Team for review.

For that, when you're ready, you should submit a PR changing the status in the draft to Awaiting Decision.

The CAP will be scheduled to be discussed at a protocol meeting. As the owner of the CAP, you will be invited to share your CAP and participate in discussion during the meeting.

You may invite any other members of your working group.

The protocol meetings will be used to decide on next step:

• If the CAP has received support and general consensus, it is moved to Awaiting Decision ;
• If the CAP requires some adjustments or needs to receive more feedback from the community, the meeting is adjourned ;
• If for any reason the CAP gets abandoned, it gets a status of Rejected.

Awaiting Decision -> Final Comment Period (FCP)

• A vote will take place among the CAP Core Team.
  • A unanimous approval from the CAP Core Team will put the CAP in a FCP: Accepted status.
  • Otherwise, the CAP will be given feedback and head towards a FCP: Rejected status (if the majority of the CAP raises concerns) or a Draft status (if only a minority of the CAP raises concerns).
  • It can take upwards of 3 meetings before a disposition is reached.

FCP -> Accepted/Rejected

• After a week of an Final Comment Period (FCP) where any major concerns that have not been previously addressed can be brought up, the CAP will head to its final disposition.
  • Concerns will be addressed on a case by case basis, and only major concerns that were not addressed earlier will move the CAP back to a Draft state.

CAP Implementation

SDF will prioritize accepted CAPs among its priorities for a given year. However, if you want to ensure your CAP is implemented in a timely manner, it is likely best for you to attempt to implement it yourself.

Once a CAP is implemented, a PR should be submitted to update its status to Implementation Review, along with the protocol version it was released in if applicable.

From here the proposal is brought up again before the protocol group for additional comment, where it is possible that the proposal is rejected based on the issues that arise from its implementation. If no issues arise, it will move to Implemented by a CAP team member.

CAP Finalization

Once an implemented CAP has been released in a specified version, the CAP should be updated with the protocol version that the implementation targets. From there, once a majority of validators on the network have accepted the implementation, it will move to Final.

CAP Team Members

CAP Core Team: Nicolas (SDF), Jed (SDF), David (SDF)