Odd behavior on Spa Termostat #13
captain324
started this conversation in
General
Replies: 1 comment
-
Interesting. I suggest checking the code for F to Centigrade, and back
conversions. I used to display the temperature in C. Sorry, can't test at
the moment.
Cheers
/C
Op ma 29 mei 2023 23:02 schreef captain324 ***@***.***>:
… I recently built a version of this project and installed it on my Pentair
Easytouch (v2.0E) panel and integrated it into my Home Assistant
installation. This project replaced the project from
https://github.com/thehookup/PoolMCU - nice upgrade.
Most functions are working as described here and in the design document.
However, the spa thermostat exhibits an odd behavior - it flips from 93F,
the heat setpoint on the easytouch controller to 4F in a random pattern.
The pool thermostat works as expected. Any ideas on how to chase this down
would be appreciated. Thanks
[image: image]
<https://user-images.githubusercontent.com/133161739/241805784-280f1adf-6fd3-4420-a980-911cbdd5146e.png>
Target temp for spa and pool
{"mode":"heat","heatsrc":"None","target_temp":4,"current_temp":90,"action":"off"}
05/29/2023 4:57:35 PM(-1.61 seconds)
{"mode":"heat","heatsrc":"Heater","target_temp":93,"current_temp":90,"action":"idle"}
05/29/2023 4:58:05 PM(-0.44 seconds)
The heater source also flips from "None" to "Heater: but it doesn't line
up with flips in target temp
—
Reply to this email directly, view it on GitHub
<#13>, or unsubscribe
<https://github.com/notifications/unsubscribe-auth/ACKIDGQRVLHKJSESAHASJRLXIUFIHANCNFSM6AAAAAAYTFH2AE>
.
You are receiving this because you are subscribed to this thread.Message
ID: ***@***.***>
|
Beta Was this translation helpful? Give feedback.
0 replies
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
-
I recently built a version of this project and installed it on my Pentair Easytouch (v2.0E) panel and integrated it into my Home Assistant installation. This project replaced the project from https://github.com/thehookup/PoolMCU - nice upgrade.
Most functions are working as described here and in the design document. However, the spa thermostat exhibits an odd behavior - it flips from 93F, the heat setpoint on the easytouch controller to 4F in a random pattern. The pool thermostat works as expected. Any ideas on how to chase this down would be appreciated. Thanks
Target temp for spa and pool
{"mode":"heat","heatsrc":"None","target_temp":4,"current_temp":90,"action":"off"} 05/29/2023 4:57:35 PM(-1.61 seconds)
{"mode":"heat","heatsrc":"Heater","target_temp":93,"current_temp":90,"action":"idle"} 05/29/2023 4:58:05 PM(-0.44 seconds)
The heater source also flips from "None" to "Heater: but it doesn't line up with flips in target temp
Beta Was this translation helpful? Give feedback.
All reactions