This document is intended to help developers and contributors to Scylla get started. The first part consists of general guidelines that make no assumptions about a development environment or tooling. The second part describes a particular environment and work-flow for exemplary purposes.
This section covers some high-level information about the Scylla source code and work-flow.
Scylla uses Git submodules to manage its dependency on Seastar and other tools. Be sure that all submodules are correctly initialized when cloning the project:
$ git clone https://github.com/scylladb/scylla
$ cd scylla
$ git submodule update --init --recursiveScylla is fairly fussy about its build environment, requiring a very recent version of the C++20 compiler and numerous tools and libraries to build.
Run ./install-dependencies.sh (as root) to use your Linux distributions's
package manager to install the appropriate packages on your build machine.
However, this will only work on very recent distributions. For example,
currently Fedora users must upgrade to Fedora 32 otherwise the C++ compiler
will be too old, and not support the new C++20 standard that Scylla uses.
Alternatively, to avoid having to upgrade your build machine or install
various packages on it, we provide another option - the frozen toolchain.
This is a script, ./tools/toolchain/dbuild, that can execute build or run
commands inside a Docker image that contains exactly the right build tools and
libraries. The dbuild technique is useful for beginners, but is also the way
in which ScyllaDB produces official releases, so it is highly recommended.
To use dbuild, you simply prefix any build or run command with it. Building
and running Scylla becomes as easy as:
$ ./tools/toolchain/dbuild ./configure.py
$ ./tools/toolchain/dbuild ninja build/release/scylla
$ ./tools/toolchain/dbuild ./build/release/scylla --developer-mode 1Note: Compiling Scylla requires, conservatively, 2 GB of memory per native thread, and up to 3 GB per native thread while linking. GCC >= 10 is required.
Scylla is built with Ninja, a low-level rule-based system. A Python script, configure.py, generates a Ninja file (build.ninja) based on configuration options.
To build for the first time:
$ ./configure.py
$ ninja-buildAfterwards, it is sufficient to just execute Ninja.
The full suite of options for project configuration is available via
$ ./configure.py --helpThe most important option is:
--enable-dpdk: DPDK is a set of libraries and drivers for fast packet processing. During development, it's not necessary to enable support even if it is supported by your platform.
Source files and build targets are tracked manually in configure.py, so the script needs to be updated when new files or targets are added or removed.
To save time -- for instance, to avoid compiling all unit tests -- you can also specify specific targets to Ninja. For example,
$ ninja-build build/release/tests/schema_change_test
$ ninja-build build/release/service/storage_proxy.oYou can also specify a single mode. For example
$ ninja-build releaseWill build everytihng in release mode. The valid modes are
- Debug: Enables AddressSanitizer and other sanity checks. It has no optimizations, which allows for debugging with tools like GDB. Debugging builds are generally slower and generate much larger object files than release builds.
- Release: Fewer checks and more optimizations. It still has debug info.
- Dev: No optimizations or debug info. The objective is to compile and link as fast as possible. This is useful for the first iterations of a patch.
Note that by default unit tests binaries are stripped so they can't be used with gdb or seastar-addr2line.
To include debug information in the unit test binary, build the test binary with a _g suffix. For example,
$ ninja-build build/release/tests/schema_change_test_gUnit tests live in the /tests directory. Like with application source files, test sources and executables are specified manually in configure.py and need to be updated when changes are made.
A test target can be any executable. A non-zero return code indicates test failure.
Most tests in the Scylla repository are built using the Boost.Test library. Utilities for writing tests with Seastar futures are also included.
Run all tests through the test execution wrapper with
$ ./test.py --mode={debug,release}The --name argument can be specified to run a particular test.
Alternatively, you can execute the test executable directly. For example,
$ build/release/tests/row_cache_test -- -c1 -m1GThe -c1 -m1G arguments limit this Seastar-based test to a single system thread and 1 GB of memory.
All changes to Scylla are submitted as patches to the public mailing list. Once a patch is approved by one of the maintainers of the project, it is committed to the maintainers' copy of the repository at https://github.com/scylladb/scylla.
Detailed instructions for formatting patches for the mailing list and advice on preparing good patches are available at the ScyllaDB website. There are also some guidelines that can help you make the patch review process smoother:
- Before generating patches, make sure your Git configuration points to
.gitorderfile. You can do it by running
$ git config diff.orderfile .gitorderfile-
If you are sending more than a single patch, push your changes into a new branch of your fork of Scylla on GitHub and add a URL pointing to this branch to your cover letter.
-
If you are sending a new revision of an earlier patchset, add a brief summary of changes in this version, for example:
In v3:
- declared move constructor and move assignment operator as noexcept
- used std::variant instead of a union
...
- Add information about the tests run with this fix. It can look like
"Tests: unit ({mode}), dtest ({smp})"
The usual is "Tests: unit (dev)", although running debug tests is encouraged.
-
When answering review comments, prefer inline quotes as they make it easier to track the conversation across multiple e-mails.
-
The Linux kernel's Submitting Patches document offers excellent advice on how to prepare patches and patchsets for review. Since the Scylla development process is derived from the kernel's, almost all of the advice there is directly applicable.
You can use the scripts/find-maintainer script to find a subsystem maintainer and/or reviewer for your patches. The script accepts a filename in the git source tree as an argument and outputs a list of subsystems the file belongs to and their respective maintainers and reviewers. For example, if you changed the cql3/statements/create_view_statement.hh file, run the script as follows:
$ ./scripts/find-maintainer cql3/statements/create_view_statement.hhand you will get output like this:
CQL QUERY LANGUAGE
Tomasz Grabiec <[email protected]> [maintainer]
Pekka Enberg <[email protected]> [maintainer]
MATERIALIZED VIEWS
Pekka Enberg <[email protected]> [maintainer]
Duarte Nunes <[email protected]> [maintainer]
Nadav Har'El <[email protected]> [reviewer]
Duarte Nunes <[email protected]> [reviewer]
Once Scylla has been compiled, executing the (debug or release) target will start a running instance in the foreground:
$ build/release/scyllaThe scylla executable requires a configuration file, scylla.yaml. By default, this is read from $SCYLLA_HOME/conf/scylla.yaml. A good starting point for development is located in the repository at /conf/scylla.yaml.
For development, a directory at $HOME/scylla can be used for all Scylla-related files:
$ mkdir -p $HOME/scylla $HOME/scylla/conf
$ cp conf/scylla.yaml $HOME/scylla/conf/scylla.yaml
$ # Edit configuration options as appropriate
$ SCYLLA_HOME=$HOME/scylla build/release/scyllaThe scylla.yaml file in the repository by default writes all database data to /var/lib/scylla, which likely requires root access. Change the data_file_directories and commitlog_directory fields as appropriate.
Scylla has a number of requirements for the file-system and operating system to operate ideally and at peak performance. However, during development, these requirements can be relaxed with the --developer-mode flag.
Additionally, when running on under-powered platforms like portable laptops, the --overprovisined flag is useful.
On a development machine, one might run Scylla as
$ SCYLLA_HOME=$HOME/scylla build/release/scylla --overprovisioned --developer-mode=yesTo interact with scylla it is recommended to build our versions of cqlsh and nodetool. They are available at https://github.com/scylladb/scylla-tools-java and can be built with
$ sudo ./install-dependencies.sh
$ ant jarcqlsh should work out of the box, but nodetool depends on a running scylla-jmx (https://github.com/scylladb/scylla-jmx). It can be build with
$ mvn packageand must be started with
$ ./scripts/scylla-jmxMultiple release branches are maintained on the Git repository at https://github.com/scylladb/scylla. Release 1.5, for instance, is tracked on the branch-1.5 branch.
Similarly, tags are used to pin-point precise release versions, including hot-fix versions like 1.5.4. These are named scylla-1.5.4, for example.
Most development happens on the master branch. Release branches are cut from master based on time and/or features. When a patch against master fixes a serious issue like a node crash or data loss, it is backported to a particular release branch with git cherry-pick by the project maintainers.
This section describes one possible work-flow for developing Scylla on a Fedora 25 system. It is presented as an example to help you to develop a work-flow and tools that you are comfortable with.
This guide will be written from the perspective of a fictitious developer, Taylor Smith.
Having two Git remotes is useful:
- A public clone of Seastar (
"public") - A private clone of Seastar (
"private") for in-progress work or work that is not yet ready to share
The first step to contributing a change to Scylla is to create a local branch dedicated to it. For example, a feature that fixes a bug in the CQL statement for creating tables could be called ts/cql_create_table_error/v1. The branch name is prefaced by the developer's initials and has a suffix indicating that this is the first version. The version suffix is useful when branches are shared publicly and changes are requested on the mailing list. Having a branch for each version of the patch (or patch set) shared publicly makes it easier to reference and compare the history of a change.
Setting the upstream branch of your development branch to master is a useful way to track your changes. You can do this with
$ git branch -u master ts/cql_create_table_error/v1As a patch set is developed, you can periodically push the branch to the private remote to back-up work.
Once the patch set is ready to be reviewed, push the branch to the public remote and prepare an email to the scylladb-dev mailing list. Including a link to the branch on your public remote allows for reviewers to quickly test and explore your changes.
Scylla includes a CMake file, CMakeLists.txt, for use only with development environments (not for building) so that they can properly analyze the source code.
CLion is a commercial IDE offers reasonably good source code navigation and advice for code hygiene, though its C++ parser sometimes makes errors and flags false issues.
Other good options that directly parse CMake files are KDevelop and QtCreator.
To use the CMakeLists.txt file with these programs, define the FOR_IDE CMake variable or shell environmental variable.
Eclipse is another open-source option. It doesn't natively work with CMake projects, and its C++ parser has many similar issues as CLion.
Scylla's compilations times can be long. Two tools help somewhat:
- ccache caches compiled object files on disk and re-uses them when possible
- distcc distributes compilation jobs to remote machines
A reasonably-powered laptop acts as the coordinator for compilation. A second, more powerful, machine acts as a passive compilation server.
Having a direct wired connection between the machines ensures that object files can be transmitted quickly and limits the overhead of remote compilation.
The coordinator has been assigned the static IP address 10.0.0.1 and the passive compilation machine has been assigned 10.0.0.2.
On Fedora, installing the ccache package places symbolic links for gcc and g++ in the PATH. This allows normal compilation to transparently invoke ccache for compilation and cache object files on the local file-system.
Next, set CCACHE_PREFIX so that ccache is responsible for invoking distcc as necessary:
export CCACHE_PREFIX="distcc"On each host, edit /etc/sysconfig/distccd to include the allowed coordinators and the total number of jobs that the machine should accept.
This example is for the laptop, which has 2 physical cores (4 logical cores with hyper-threading):
OPTIONS="--allow 10.0.0.2 --allow 127.0.0.1 --jobs 4"
10.0.0.2 has 8 physical cores (16 logical cores) and 64 GB of memory.
As a rule-of-thumb, the number of jobs that a machine should be specified to support should be equal to the number of its native threads.
Restart the distccd service on all machines.
On the coordinator machine, edit $HOME/.distcc/hosts with the available hosts for compilation. Order of the hosts indicates preference.
10.0.0.2/16 localhost/2
In this example, 10.0.0.2 will be sent up to 16 jobs and the local machine will be sent up to 2. Allowing for two extra threads on the host machine for coordination, we run compilation with 16 + 2 + 2 = 20 jobs in total: ninja-build -j20.
When a compilation is in progress, the status of jobs on all remote machines can be visualized in the terminal with distccmon-text or graphically as a GTK application with distccmon-gnome.
One thing to keep in mind is that linking object files happens on the coordinating machine, which can be a bottleneck. See the next sections speeding up this process.
Linking Scylla can be slow. The gold linker can replace GNU ld and often speeds the linking process. On Fedora, you can switch the system linker using
$ sudo alternatives --config ldWith debug info enabled, most of the link time is spent copying and
relocating it. It is possible to leave most of the debug info out of
the link by writing it to a side .dwo file. This is done by passing
-gsplit-dwarf to gcc.
Unfortunately just -gsplit-dwarf would slow down gdb startup. To
avoid that the gold linker can be told to create an index with
--gdb-index.
More info at https://gcc.gnu.org/wiki/DebugFission.
Both options can be enable by passing --split-dwarf to configure.py.
Note that distcc is not compatible with it, but icecream (https://github.com/icecc/icecream) is.
Sometimes Scylla development is closely tied with a feature being developed in Seastar. It can be useful to compile Scylla with a particular check-out of Seastar.
One way to do this it to create a local remote for the Seastar submodule in the Scylla repository:
$ cd $HOME/src/scylla
$ cd seastar
$ git remote add local /home/tsmith/src/seastar
$ git remote update
$ git checkout -t local/my_local_seastar_branchInstall dependencies:
$ dnf install llvm # for llvm-profdata and llvm-cov
$ dnf install lcov # for genhtml
Build the tests you want to generate coverage for, as many as you want. Only debug mode is supported for now. Make sure to build the tests with debug symbols.
Run the test and also set LLVM_PROFILE_FILE such that its path and filename matches that of the test executable:
$ LLVM_PROFILE_FILE='build/debug/test/boost/querier_cache_test_g.profraw' build/debug/test/boost/querier_cache_test_g
Note that profraw extension. Run all the tests you want to include in the generated report.
Merge and index the generated raw profiling data into a single profdata file:
$ llvm-profdata merge -sparse $(find -name *.profraw) -o build/debug/test/tests.profdata
You can include all generated profraw files as above, or list the files you want to include manually.
Export the report into lcov format:
$ llvm-cov export -format=lcov -instr-profile=build/debug/test/tests.profdata ${test_executables} > build/debug/test/tests.info
$test_executables is a space-separated list of all the test executables that participate in the report. These are needed to resolve symbols to source lines.
Generate the html report:
$ genhtml -o build/debug/test/coverage-report build/debug/test/tests.info
Point your browser to index.html in the specified output directory:
$ xdg-open file:///$(realpath ./build/debug/test/coverage-report/index.html)
Be horrified. Go and write more tests.
Slides: 2018.11.20: https://www.slideshare.net/tomekgrabiec/scylla-core-dump-debugging-tools