Skip to content

charmplusplus/projections

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Projections

Projections CI Documentation Status DOI

Projections is a tool to visusalize execution traces of Charm++ and AMPI applications.

Compiling Projections

  1. Make sure the JDK commands java, javac and jar are in your path. You should use at least Java version 8, and your java and javac should be of the same version. You also need gradle and, optionally, the GNU tool make.

  2. Type make (or gradle copyJarToBin if you don't have make).

  3. The following files will be located in bin:

    projections : Starts projections, for UNIX machines

    projections.bat : Starts projections, for Windows machines

    projections.jar : archive of all the java and image files

Running Projections

Run $ ./bin/projections from the root of the Projections directory.

Using Projections

Projections is a visualization tool to help you understand and analyze what it happening in your parallel (Charm++) program. To use Projections, you first have to make sure that Charm++ is compiled with tracing enabled and that your program is compiled with the Projections tracemode. Usually, this means adding --enable-tracing to your Charm++ build options and -tracemode projections to your program compile options. When you run your program compiled with this tracemode, a log file will be created for each processor. An additional state file will also be created. The names of the log files will be NAME.#.log{.gz}, where NAME is the name of your executable and # is the processor #. The name of the state file is NAME.sts.

If your environment is set up correctly, as described in the previous section, all you have to do to start Projections is type 'projections' at the prompt.

When Projections starts, you will see the main window with a toolbar with three options, File, Tools, and Debug.

To begin using Projections, use "File -> Open File(s)" to select the data you want to analyze. To do so, navigate to the directory containing your data and select the *.sts file. If you have selected a valid file, Projections will load in some preliminary data from the files and then activate the rest of the buttons in the main window. If your file is invalid, you will be shown an error dialog.

After opening a file, there are many different tools you can use to analyze your data:

  1. Timelines
  2. Usage Profile
  3. Communication Per Processor
  4. Communication Over Time
  5. Call Table
  6. View Log Files
  7. Histograms
  8. Overview
  9. Animation
  10. Time Profile
  11. Performance Counters
  12. User Events
  13. User Stats Over Time
  14. User Stats Per Processor
  15. Extrema Analysis
  16. Multirun Analysis
  17. Noise Miner
  18. Streaming CCS
  19. Memory Usage

Tool descriptions

1. Timelines

The Timelines window lets you look at what a specific processor is doing at each moment of the program.

When the Timelines window first appears, a dialog box appears along with it. The box asks for the following information:

  • Processors: Choose which processor(s) you want to see a timeline for. To enter multiple values, separate them with a comma or a dash (for ranges). Strides can be specified by using a colon to denote the stride size. Some examples:

    To see processors Enter
    1, 3, 5, 7 1,7:2
    1, 2, 3, 4 1-4
    1, 2, 3, 7 1,2,3,7
  • Start Time : Choose what time you want your timeline to start at.

  • End Time : Choose what time you want your timeline to end at.

The dialog box tells you what the valid processor choices are, as well as what the valid time ranges are.

Particular time/processor ranges can be saved by using the "Add to History List" button, which will save the currently selected processors and time range for later use. The dropdown menu above the button shows the current saved ranges. Particular ranges can be removed by clicking the "Remove Selected History" button and the history can be saved to disk for future runs using the "Save History to Disk" button.

To select annotated timesteps, click the "Find Annotated Timesteps" button. This finds user supplied notes on PE 0 that contain the sigil "***". The times that these notes were made on PE 0 are annotated timesteps. After clicking the button, two dropdown containing the names of the annotated timesteps are displayed, and you can then select which timesteps you would like to use for the start and end times of the range.

There are options to filter out entries shorter than a certain time, filter out messages, filter out user events, and highlight the top n longest idle and entry times.

To automatically select the portion of the execution with valid performance data, click on "Adjust ranges to show useful information" at the bottom of the window.

When you are satisfied with your time and processor ranges, click on 'OK'. Projections will then get the Timeline data for you. The time for this step depends on the number of items in your time range and the number of processors you have chosen.

The Timeline Window consists of two parts:

  1. Display Panel:

    This is where the timelines are displayed and is the largest portion of the window. The time axis is displayed at the top of the panel, and the units are microseconds. The left side of the panel shows the processor labels. Underneath each label are two numbers, the first indicating the percentage of the total time in your timeline that particular PE spent busy during the execution, and the second indicating the percentage of the total time that PE spent actually working on the application's entry methods. The timeline itself consists of colored bars for each work item. Placing the cursor over one of these bars will bring up a pop-up window telling you the name of that item, the begin time, the end time, and the total time. It will also tell you what amount of time was spent packing, how many messages were created during this work item, and which processor created this item. If you click on the item, by default, a line will be traced from the work item to the sender of the message responsible for this work item. This behavior can be modified by selecting different options in the Tracing menu item. Additionally, right clicking on a work item brings up a context menu, allowing you to view more details of that work item, change the color of that entry method, and drop or load other PEs based on their relation to that work item. Viewing more details shows a window listing all of the messages created during this work item along with their targets and send times, along with other details of the work item.

  2. Control Panel:

    • At the bottom of the window Checkboxes:
    • Display Pack Times
    • Display Message Sends These are represented by little white vertical lines at the time a message was created.
    • Display Idle Time
    • Display User Events
    • View n User Events Opens a new window showing user events on the selected PEs Buttons:
    • Load New Time/PE Range Brings up the initial dialog box to select a new range
    • Zoom In/Out
    • Zoom Selection / Load Selection After highlighting a section of the display by clicking and dragging in the time axis area, these options let you either zoom into the selected area or reload the selected area.

2. Usage Profile:

The Usage Profile window lets you see percentage-wise what each processor spends its time on during a specified period.

When the window first comes up, a dialog box appears asking for the processor(s) you want to look at as well as the time range you want to look at. This is similar to the dialog for the Timelines.

The bottom portion of the Usage Profile window lets you adjust the scales in both the X and Y directions. The X direction is useful if you are looking at a large number of processors. The Y direction is useful if there are small-percentage items for a processor.

The left side of the display shows a scale from 0% to 100%. The main part of the display shows the statistics. Each processor is represented by a vertical bar. The top of the bar always shows the overhead time. Below that is always (if exists) the idle time and then the message packing/unpacking times. The rest of the bar is ordered from the bottom with the largest percentage items being closest to the bottom. If you place the cursor over a portion of the bar, a pop-up window will appear telling you the name of the item, what percent of the usage it has, and the processor it is on.

3. Communication Per Processor:

This tool shows communication over the interval per selected PE. This view is in the processor domain. It can show the number of messages or bytes sent or received, depending on the option selected at the bottom of the window.

4. Communication Over Time:

This tool shows communication over time across all selected PEs. This view is in the time domain. It can show the number of messages or bytes sent or received, depending on the option selected at the bottom of the window.

5. Call Table:

This tool shows all the entry methods invoked by other entry methods. The left aligned entry method name indicates the current entry method, and the indented entry methods below are those called by the current entry method. Enabling EP Detail or Statistics at the bottom shows the qualified name and parameter list of the EP or the number of total messages received, bytes received, and statistics on the received bytes, respectively.

6. View Log Files:

This tool shows raw log files for the selected PEs and time interval. The log files are parsed by Projections and event types, entry method names, etc. are printed rather than the raw integers of the actual logs.

7. Histograms:

This tool creates histograms for various properties of the program, execution time, accumulated execution time, message size, and idle percentage.

8. Overview:

This tool shows a high level overview of execution across the selected PEs and time interval. It displays a dense, quantized view of the execution of the program, either in terms of entry methods or utilization. Essentially, it provides a coarser view of the same information as Timeline (see #1).

9. Animations:

This window animates the processor usage by displaying different colors for different amount of usage.

The left box allows you to select the real time between frames; the right box the processor time between frames.

10. Time Profile:

This tool shows execution across the selected PEs and time interval. This view is in the time domain. This tool shows a high level overview of execution across the selected PEs and time interval. It displays a dense, quantized view of the execution of the program, either in terms of entry methods or utilization. Essentially, it provides a coarser view of the same information as Timeline (see #1).

11. Performance Counters:

This tool shows the values of performance counters per entry point and PE. This option is disabled unless Charm++ was compiled with support for PAPI counters.

12. User Events:

This tool shows the summation of bracketed user events per PE across the selected PEs and time interval.

13. User Stats Over Time:

This tool shows the values of user stats over the program execution across the selected PEs and time interval. This view is in the time domain.

14. User Stats Per Processor:

This tool shows the values of user stats per PE across the selected PEs and time interval. This view is in the PE domain.

15. Extrema Analysis:

This tool identifies extreme clusters of particular attributes through the execution. The attribute, activity, extrema threshold, and number of clusters are customizable when selecting a time range.

16. Multirun Analysis:

This tool compares multiple executions of a program to each other, showing how time spent in entry methods changes across the execution. Currently, this view only works with summary data due to memory constraints.

17. Noise Miner:

This tool identifies abnormally long entry methods to detect symptoms consistent with computational noise. Long events are filtered and clustered to provide a summary of such occurrences.

18. Streaming CCS:

This tool uses the Converse Client Server feature of Charm++ to stream performance data from running programs. To use it, the Charm++ program must be compiled with -tracemode utilization, and executed with ++server ++server-port <port number>.

19. Memory Usage:

This tool provides a view of memory utilization in the application when it is linked with the memory tracing module.

Notes

Charts in some tools are produced by JFreeChart. Image output is performed by FreeHEP.