Skip to content

Latest commit

 

History

History
109 lines (72 loc) · 3.15 KB

README.md

File metadata and controls

109 lines (72 loc) · 3.15 KB
Raw

XRootD Cephfs Open Storage System Plugin

This project provides a s.c. OSS plugin for the XRootD server to bridge IO to/from a Cephfs filesystem without using a kernel or fuse client mount.

Build

  mkdir build
  cd build
  # . /opt/rh/devtoolset-8/enable                   # use a modern GCC with C++11 support
  cmake ../ -DCMAKE_INSTALL_PREFIX=/usr/
  make
  make install

Setup

The required XRootD configuration file directives to use the OSS plug-in are:

  ofs.osslib /path/to/libCephfsOss.so 
  ofs.persist off           #
  xrootd.export / nolock    # allow multiple writers
  xrootd.async off nosf     # use sync IO and don't use sendfile

Configuration

The Cephfs monitor host name(s) have to be stored in a ceph configuration file. The configured default ceph configuration file is:

  cephfs.config /etc/ceph/ceph.conf

The Cephfs volume to mount is by default:

  cephfs.volume /

If you use e.g. an OpenStack manila volume you replace the volume parameter with the volume path provided by OpenStack.

The Cephfs (cephx) client id is by default:

  cephfs.id admin

You can replace this with the appropriate client id. In the case of OpenStack the client id is shown for each manila share. Ceph stores the corresponding keyring for a given id under /etc/ceph/ceph.client.<id>.conf e.g. the keyring for id admin would be /etc/ceph/ceph.client.admin.conf.

File Layout Configuration

By default Cephfs places files with the given Cephfs extended attributes in a given directory and the default data pool.

You can modify this behaviour on per-file basis appending CGI parameters to your XRootD URL. The supported parameters are:

  cephfs.stripe_unit=<bytes>
  cephfs.stripe_count=<count>
  cephfs.object_size=<bytes>
  cephfs.pool=<data-pool>

A description of these can be found here: https://docs.ceph.com/en/latest/cephfs/file-layouts/

To be able to use that feature you need a special capability which is explained here: https://docs.ceph.com/en/latest/cephfs/client-auth/#layout-and-quota-restriction-the-p-flag

File Ownership

By default all files will be accessed as the effective user of the XRootD process.

Running XRootD in NFS style

If you want file ownership and access control to reflect the authenticated client identity, you can use https://github.com/cern-eos/xrootd-auth-change-uid

This example configuration uses UNIX id mapping:

xrootd.seclib libXrdSec.so
sec.protocol unix
sec.protbind * only unix

ofs.authlib /usr/lib64/libAuthChangeFsUid.so
ofs.authorize

Asynchronous vs. synchronous IO

If xrootd.async off is used the XRootD server uses synchronous (blocking) IO. If you are interested in high-performance streaming you can configure large asynchronous IO using the following two configuration parameters.

xrootd.async nosf segsize 16777216
xrd.buffers maxbsz 16777216

In this example we use asynchronous IO with 16M block size. Be aware that large IO segment sizes increase the memory requirements for open files.