[CRITICAL] Tapping tempture change repeatedly causes sudden jumps and uncontrolled temps

[parkerlreed]

To Reproduce
Steps to reproduce the behaviour:

1. Turn on heater on Pinecil
2. Use Pinecil interface to adjust temp clicking repeatedly

Expected behaviour
Temperature to only jump by the amount of clicks registered.

Actual behaviour
Temperatures rises uncontrollably.

Screenshots

2024-09-20.01-28-50.mp4

Specs:

• OS: Arch Linux
• Browser: Firefox/Chrome
• PineSAM Version: 2.2.6
• IronOS build/date: 2.22 11/05/2023

Additional context

Clicking slowly works as expected, but if you tap repeatedly in either direction, the temps continues without user intervention until it starts trying to set invalid values. Was at a low temp and just wanted to go up a few degrees and ended up at max without intervention. Serious safety issue.

Tested with both Firefox and Chrome

[parkerlreed]

2024-09-20.01-36-52.mp4

If it goes on long enough the iron itself starts flashing the display like it's glitching out.

[builder555]

Sounds like you found a hidden "don't tire your mouse out, I got this" feature :)
Thank you for the report, I'll take a look this weekend.

[builder555]

@parkerlreed do you want to try 2.2.9? I just pushed it. I didn't install arch, but I might've found the problem. If it persists, I'll set up a vm and test it out.
Which desktop environment are you using?

[parkerlreed]

Of course I forgot to bring it with me on the trip.

Plasma Wayland

I'll update whenever I can test it.

[parkerlreed]

Yep all looks good