RIFT draft version: draft-ietf-rift-rift-12
Thrift data model version: 4.1
Feature | Supported |
---|---|
Link Information Element (LIE) Packet | Yes |
Link Information Element (LIE) Finite State Machine (FSM) | Yes |
Adjacencies using IPv4 Link and Multicast Addresses | Yes |
Adjacencies using IPv6 Link and Multicast Addresses | Yes |
Feature | Supported |
---|---|
Automatic SystemID Selection | Yes |
Zero Touch Provisioning (ZTP) Finite State Machine (FSM) | Yes |
Automatic Level Determination Procedure | Yes |
Feature | Supported | GitHub Issue |
---|---|---|
Receive all types of TIE packets | Yes | |
Store received TIE packets in TIE-DB | Yes | |
Age TIE packets in TIE-DB and remove when they expire | Yes | |
Add neighbor's newer TIEs to request queue | Yes | |
Add neighbor's older TIEs to send queue | Yes | |
Add neighbor's same TIEs to acknowledge queue | Yes | |
Re-transmit TIEs if they are not acknowledged | Yes | |
Periodically serve all queues (TX, RTX, REQ, ACK) | Yes | |
Propagate TIE packets without decoding and re-encoding | Yes | |
Send / Process Node TIE packets | Yes | |
Send / Process North Prefix TIE packets (configured prefixes) | Yes | |
Send / Process South Prefix TIE packets (default prefixes) | Yes | |
Send / Process Positive Disaggregation TIE packets | Yes | |
Send / Process Negative Disaggregation TIE packets | Yes | |
Send / Process Policy Guided Prefix TIE packets | No | 32 |
Send / Process Key Value TIE packets | No | 33 |
Process received TIDE packets | Yes | |
Request missing TIEs based on received TIDE packets | Yes | |
Send newer TIEs based on received TIDE packets | Yes | |
Detect extra TIEs based on gaps inside received TIDE packets | Yes | |
Detect extra TIEs based on gaps between received TIDE packets | Yes | |
Acknowledge same TIEs based on received TIDE packets | Yes | |
Periodically originate TIDE packets | Yes | |
Process received TIRE packets | Yes | |
Start sending TIES requested in received TIRE packet | Yes | |
Stop sending TIES acknowledged in received TIRE packet | Yes | |
Apply flooding scope rules when sending TIE packets | Yes | |
Apply flooding scope rules when sending TIDE packets | Yes | |
Apply flooding scope rules when sending TIRE packets | Yes | |
Southbound Default Route Origination | Yes | |
Northbound TIE Flooding Reduction | Yes | |
Applying Policy | No | 32 |
Store Policy-Guided Prefix for Route Computation and Regeneration | No | 32 |
Re-origination | Yes | |
Flood IPv4 Prefixes | Yes | |
Flood IPv6 Prefixes | Yes |
Feature | Supported | GitHub Issue |
---|---|---|
Reachability Computation | Yes | |
Northbound SPF | Yes | |
Southbound SPF | Yes | |
Leaf-to-leaf shortcuts | No | 40 |
Equal-Cost Multi-Path (ECMP) | Yes | |
Fabric bandwidth balancing / Non-Equal-Cost Multi-Path (NECMP) | Yes | |
Use non-best paths (Eppstein k-shortest) | No | 41 |
Route Calculation for Positive Disaggregation | Yes | |
Route Calculation for Negative Disaggregation | Yes | |
Routing Information Base (RIB) | Yes | |
Forwarding Information Base (FIB) abstraction | Yes | |
Store FIB routes into kernel route table (on Linux only) | Yes |
Feature | Supported | GitHub Issue |
---|---|---|
Attaching Prefixes | Yes | |
Attaching Policy-Guided Prefixes | No | 32 |
Positive Disaggregation on Link & Node Failures | Yes | |
Negative Disaggregation on Link & Node Failures | Yes | |
Overload Bit | No | 42 |
Optimized Route Computation on Leafs | No | 43 |
Mobility | No | 44 |
Anycast | No | 45 |
Overlays and Signaling | Yes | |
Key/Value Store | No | 33 |
Interactions with BFD | No | 46 |
Fabric Bandwidth Balancing | No | 38 |
Label Binding | No | 47 |
Segment Routing Support with RIFT | No | 48 |
Leaf to Leaf Procedures | No | 40 |
Address Family and Multi Topology Considerations | Yes | |
Reachability of Internal Nodes in the Fabric | Yes | |
One-Hop Healing of Levels with East-West Links | No | 40 |
Considerations for Leaf-Only Implementation | Yes | |
Adaptations to Other Proposed Data Center Topologies | Yes | |
Originating Non-Default Route Southbound | No | 49 |
Multicast Routing | No | 39 |
Feature | Supported | GitHub Issue |
---|---|---|
Telnet client | Yes | |
SSH client | No | 31 |
Command Line Interface (CLI) | Yes | |
CLI Command History | Yes | |
CLI Tab Completion | No | 50 |
CLI Context-Sensitive Help | Partial | 51 |
Logging | Yes | |
YANG support | No | 52 |
Startup Configuration File | Yes | |
Run-time Configuration Changes | Partial | 53 |
Multi-Node Topologies | Yes |
Feature | Supported |
---|---|
Formal Finite State Machine (FSM) framework | Yes |
Generate FSM documentation from code | Yes |
Report history of transitions | Yes |
Visualize history of FSM transitions | Yes |
Distinguish boring (verbose) vs interesting (non-verbose) transactions | Yes |
Feature | Supported |
---|---|
Travis Continuous Integration | Yes |
Codecov code coverage measuring and reporting | Yes |
Automated Pylint | Yes |
Automated Pytest Unit Tests | Yes |
Automated System Tests | Yes |
Automated Interoperability Tests | Yes, with Juniper RIFT |
Automated Chaos Tests | Yes |