thes12.clo

% UNIVERSITY OF CALGARY THESIS DOCUMENT CLASS OPTION -- thes12.clo 98/03/01
%   for LaTeX version 2e
% Modified N. Mancell 98/03/01 formerly thes12.sty

% Modified (thes12.sty)   D.Teale  92-09-23   To fix typeout for altchapter

%  ****************************************
%  *               FONTS                  *
%  ****************************************
%



\lineskip 1pt            % \lineskip is 1pt for all font sizes.
\normallineskip 1pt
\def\baselinestretch{1}

% All font selection commands have been revised to conform with
% Latex2e font selection commands (NM 98/03/01).
%
% Each size-changing command \SIZE executes the command
%        \fontsize\@FONTSIZE{BASELINESKIP}\selectfont
% where:
%   BASELINESKIP = Normal value of \baselineskip for that size.  (Actual
%                  value will be \baselinestretch * BASELINESKIP.)
%
%  \@FONTSIZE     = Name of font-size command.  The currently available
%                  (preloaded) font sizes are: \@vpt (5pt), \@vipt (6pt),
%                  \@viipt (etc.), \@viiipt, \@ixpt, \@xpt, \@xipt, \@xiipt,
%                  \@xivpt, \@xviipt, \@xxpt, \@xxvpt. These are defined
%                  ltfss.dtx.
%
% For reasons of efficiency that needn't concern the designer,
% the document style defines \@normalsize instead of \normalsize .  This is
% done only for \normalsize, not for any other size-changing commands.

%\renewcommand{\normalsize}{\fontsize\@xiipt{14.5}\selectfont% (nm2007)
\renewcommand{\normalsize}{\fontsize{12pt}{14.5pt}\selectfont %(nm2007 added)
\abovedisplayskip 12\p@ plus3\p@ minus7\p@
\belowdisplayskip \abovedisplayskip
\abovedisplayshortskip  \z@ plus3\p@
\belowdisplayshortskip  6.5\p@ plus3.5\p@ minus3\p@}

\newcommand{\small}{\fontsize\@xipt{13.6}\selectfont%
\abovedisplayskip 11\p@ plus3\p@ minus6\p@
\belowdisplayskip \abovedisplayskip
\abovedisplayshortskip  \z@ plus3\p@
\belowdisplayshortskip  6.5\p@ plus3.5\p@ minus3\p@
\def\@listi{\parsep 4.5\p@ plus 2\p@ minus 1\p@
            \itemsep \parsep
            \topsep 9\p@ plus 3\p@ minus 5\p@}}

\newcommand{\footnotesize}{\fontsize\@xpt{12}\selectfont%
\abovedisplayskip 10\p@ plus2\p@ minus5\p@
\belowdisplayskip \abovedisplayskip
\abovedisplayshortskip  \z@ plus3\p@
\belowdisplayshortskip  6\p@ plus3\p@ minus3\p@
\def\@listi{\topsep 6\p@ plus 2\p@ minus 2\p@\parsep 3\p@ plus 2\p@ minus 1\p@
\itemsep \parsep}}

\newcommand{\scriptsize}{\fontsize\@viiipt{9.5pt}\selectfont}
\newcommand{\tiny}{\fontsize\@vipt{7pt}\selectfont}
\newcommand{\large}{\fontsize\@xivpt{18pt}\selectfont}
\newcommand{\Large}{\fontsize\@xviipt{22pt}\selectfont}
\newcommand{\LARGE}{\fontsize\@xxpt{25pt}\selectfont}
\newcommand{\huge}{\fontsize\@xxvpt{30pt}\selectfont}
\newcommand{\Huge}{\fontsizelet\@xxvpt{30pt}\selectfont}

% The shortform font selection commands are not defined in LaTeX2e.
% This defines them so that they do non-orthogonal font selection,
% which is useful if you are in the middle of converting a document
% from 2.09.  These commands are no longer used internally in this
% class. (NM 98/03/01)

\DeclareOldFontCommand{\rm}{\normalfont\rmfamily}{\mathrm}
\DeclareOldFontCommand{\sf}{\normalfont\sfffamily}{\mathsf}
\DeclareOldFontCommand{\tt}{\normalfont\ttfamily}{\mathtt}
\DeclareOldFontCommand{\bf}{\normalfont\bfseries}{\mathbf}
\DeclareOldFontCommand{\it}{\normalfont\itshape}{\mathit}
\newcommand{\sl}{\slshape}
\newcommand{\sc}{\scshape}

\normalsize  % Choose the normalsize font.


%  ****************************************
%  *            PAGE LAYOUT               *
%  ****************************************
%
% All margin dimensions measured from a point one inch from top and side
% of page.

% SIDE MARGINS:
\if@twoside                 % Values for two-sided printing:
   \oddsidemargin 1in      %   Left margin on odd-numbered pages.
   \evensidemargin 1in     %   Left margin on even-numbered pages.
   \marginparwidth 1in    %   Width of marginal notes.
\else                       % Values for one-sided printing:
   \oddsidemargin 1in      %   Note that \oddsidemargin = \evensidemargin
   \evensidemargin 1in
   \marginparwidth 1in
\fi
\marginparsep 1in          % Horizontal space between outer margin and
                            % marginal note


% VERTICAL SPACING:
                         % Top of page:
\topmargin 0pt          %    Nominal distance from top of page to top of
                         %    box containing running head.
\headheight 12pt         %    Height of box containing running head.
\headsep 25pt            %    Space between running head and text.
% \topskip = 10pt        %    '\baselineskip' for first line of page.
                         % Bottom of page:
%\footheight 12pt        %    (NM 98/03/01)Height of box containing
                         %    running foot.
\footskip 30pt           %    Distance from baseline of box containing foot
                         %    to baseline of last line of text.


% DIMENSION OF TEXT:

\textheight 580.5pt      % Height of text (including footnotes and figures,
                         % excluding running head and foot).
\textwidth 429.5pt         % Width of text line.
                         % For two-column mode:
\columnsep 10pt          %    Space between columns
\columnseprule 0pt       %    Width of rule between columns.

% A \raggedbottom command causes 'ragged bottom' pages: pages set to
% natural height instead of being stretched to exactly \textheight.

% FOOTNOTES:

\footnotesep 8.4pt    % Height of strut placed at the beginning of every
                      % footnote = height of normal \footnotesize strut,
                      % so no extra space between footnotes.

\skip\footins 10.8pt plus 4pt minus 2pt  % Space between last line of text and
                                         % top of first footnote.

% FLOATS: (a float is something like a figure or table)
%
%  FOR FLOATS ON A TEXT PAGE:
%
%    ONE-COLUMN MODE OR SINGLE-COLUMN FLOATS IN TWO-COLUMN MODE:
\floatsep 14pt plus 2pt minus 4pt        % Space between adjacent floats moved
                                         % to top or bottom of text page.
\textfloatsep 20pt plus 2pt minus 4pt    % Space between main text and floats
                                         % at top or bottom of page.
\intextsep 14pt plus 4pt minus 4pt       % Space between in-text figures and
                                         % text.
%\@maxsep 20pt                           % (NM 98/03/01)The maximum of
                                         %\floatsep,
                                         % \textfloatsep and \intextsep (minus
                                         % the stretch and shrink).
%    TWO-COLUMN FLOATS IN TWO-COLUMN MODE:
\dblfloatsep 14pt plus 2pt minus 4pt     % Same as \floatsep for double-column
                                         % figures in two-column mode.
\dbltextfloatsep 20pt plus 2pt minus 4pt % \textfloatsep for double-column
                                         % floats.
%\@dblmaxsep 20pt                        % (NM98/03/01)The maximum of
                                         % \dblfloatsep and
                                         % \dbltexfloatsep.

%  FOR FLOATS ON A SEPARATE FLOAT PAGE OR COLUMN:
%    ONE-COLUMN MODE OR SINGLE-COLUMN FLOATS IN TWO-COLUMN MODE:
\@fptop 0pt plus 1fil    % Stretch at top of float page/column. (Must be
                         % 0pt plus ...)
\@fpsep 10pt plus 2fil    % Space between floats on float page/column.
\@fpbot 0pt plus 1fil    % Stretch at bottom of float page/column. (Must be
                         % 0pt plus ... )

%   DOUBLE-COLUMN FLOATS IN TWO-COLUMN MODE.
\@dblfptop 0pt plus 1fil % Stretch at top of float page. (Must be 0pt plus ...)
\@dblfpsep 10pt plus 2fil % Space between floats on float page.
\@dblfpbot 0pt plus 1fil % Stretch at bottom of float page. (Must be
                         % 0pt plus ... )
% MARGINAL NOTES:
%
\marginparpush 7pt       % Minimum vertical separation between two marginal
                         % notes.

%  ****************************************
%  *           PARAGRAPHING               *
%  ****************************************
%
\parskip 0pt plus 1pt              % Extra vertical space between paragraphs.
\parindent 1.5em                   % Width of paragraph indentation.
\topsep 10pt plus 4pt minus 6pt    % Extra vertical space, in addition to
                                   % \parskip, added above and below list and
                                   % paragraphing environments.
\partopsep 3pt plus 2pt minus 2pt  % Extra vertical space, in addition to
                                   % \parskip and \topsep, added when user
                                   % leaves blank line before environment.
\itemsep 5pt plus 2.5pt minus 1pt  % Extra vertical space, in addition to
                                   % \parskip, added between list items.

% The following page-breaking penalties are defined

\@lowpenalty   51      % Produced by \nopagebreak[1] or \nolinebreak[1]
\@medpenalty  151      % Produced by \nopagebreak[2] or \nolinebreak[2]
\@highpenalty 301      % Produced by \nopagebreak[3] or \nolinebreak[3]

\@beginparpenalty -\@lowpenalty    % Before a list or paragraph environment.
\@endparpenalty   -\@lowpenalty    % After a list or paragraph environment.
\@itempenalty     -\@lowpenalty    % Between list items.

% \clubpenalty         % 'Club line'  at bottom of page.
% \widowpenalty        % 'Widow line' at top of page.
% \displaywidowpenalty % Math display widow line.
% \predisplaypenalty   % Breaking before a math display.
% \postdisplaypenalty  % Breaking after a math display.
% \interlinepenalty    % Breaking at a line within a paragraph.
% \brokenpenalty       % Breaking after a hyphenated line.

%    ****************************************
%    *        CHAPTERS AND SECTIONS         *
%    ****************************************
%
% \sty@SECTION{#1}{#2} is defined to be the type, size, placement of section titles
\def\setsectionstyle#1#2{\@ifundefined{sty@#1}%
{\@warning{sectionstyle `\string#1' on page \thepage \space undefined}}%
{\@namedef{sty@#1}{#2}}}
%{\edef\@tempsty{\@nameuse{sty@#1}}\show\@tempsty%
%\let\@tempstya\@tempsty\show\@tempstya\@namedef{sty@#1}{\@nameuse{@tempstya}#2}}}
% initialization of \sty@SECTION
\def\sty@chapter{\Large\centering} %removed \bfseries 2006nm
\def\sty@section{\large} %removed \bfseries 2006nm
\def\sty@subsection{\normalsize} %removed \bfseries 2006nm
\def\sty@subsubsection{\normalsize} %removed \bfseries after \normalsize 2006nm
\def\sty@paragraph{\normalsize} %removed \bfseries 2006nm
\def\sty@subparagraph{\normalsize} %removed \bfseries 2006nm

\def\part{\cleardoublepage   % Starts new page.
   \thispagestyle{plain}     % Page style of part page is 'plain'
  \if@twocolumn              % IF two-column style
     \onecolumn              %  THEN \onecolumn
     \@tempswatrue           %       @tempswa := true
    \else \@tempswafalse     %  ELSE @tempswa := false
  \fi                        % FI
  \hbox{}\vfil               % Add fil glue to center title
  \bgroup  \centering        % BEGIN centering
  \secdef\@part\@spart}

\def\@part[#1]#2{\ifnum \c@secnumdepth >-2\relax  % IF secnumdepth > -2
        \refstepcounter{part}                     %   THEN step part counter
        \addcontentsline{toc}{part}{\thepart      %        add toc line
        \hspace{1em}#1}\else                      %   ELSE add unnumbered line
        \addcontentsline{toc}{part}{#1}\fi        % FI
   \markboth{}{}
    \ifnum \c@secnumdepth >-2\relax  % IF secnumdepth > -2
      \huge\bf Part \thepart         %   THEN Print 'Part' and number
    \par                             %         in \huge bold.
    \vskip 20pt \fi                  %        Add space before title.
    \Huge \bfseries                  % FI
    #1\@endpart}                     % Print Title in \Huge bold.

% \@endpart finishes the part page
%
\def\@endpart{\par\egroup     % END centering
   \vfil\newpage              % End page with 1fil glue.
   \if@twoside                % IF twoside printing
       \hbox{}                %   THEN Produce totally blank page
       \thispagestyle{empty}
       \newpage
   \fi                        % FI
   \if@tempswa                % IF @tempswa = true
     \twocolumn               %   THEN \twocolumn
   \fi}                       % FI

\def\@spart#1{\Huge \bfseries                % Print title in \huge boldface
   #1\@endpart}

% \@makechapterhead {TEXT} : Makes the heading for the \chapter command.
%

\def\@makechapterhead#1{             % Heading for \chapter command
%  \vspace*{12pt}                     % Space at top of text page.
  { \parindent 0pt \raggedright
    \ifnum \c@secnumdepth >\m@ne     % IF secnumdepth > -1 THEN
      \Large \centering \bf{\sty@chapter} \@chapapp{} \bf{\thechapter} % Print 'Chapter'
%                                                           and number.%removed \bfseries 2006nm
      \par
      \vskip 12pt \fi                  % Space between number and title.
    \Large\sty@chapter                  % Title.%removed \bfseries 2006nm
    #1\par
    \nobreak                         % TeX penalty to prevent page break.
    \vskip 24pt                      % Space between title and text.
  } }

% \@makeschapterhead {TEXT} : Makes the heading for the \chapter* command.
%

\def\@makeschapterhead#1{             % Heading for \chapter* command
%  \vspace*{12pt}                     % Space at top of page.
  { \parindent 0pt \raggedright
    \Large\sty@chapter                  % Title.%removed \bfseries 2006nm
    #1\par
    \nobreak                         % TeX penalty to prevent page break.
    \vskip 24pt                      % Space between title and text.
  } }

% \secdef{UNSTARCMDS}{STARCMDS} :
%    When defining a \chapter or \section command without using
%    \@startsection, you can use \secdef as follows:
%       \def\chapter { ... \secdef \CMDA \CMDB }
%       \def\CMDA    [#1]#2{ ...   % Command to define \chapter[...]{...}
%       \def\CMDB    #1{ ...       % Command to define \chapter*{...}

\def\chapter{\clearpage      % Starts new page.
   \pagestyle{plain}     % Page style of chapter page is 'plain' %changed from \thispagestyle{plain} to pagestyle{fancy}2009nm
   \global\@topnum\z@        % Prevents figures from going at top of page.
   \@afterindentfalse        % Suppresses indent in first paragraph.  Change
   \secdef\@chapter\@schapter}   % to \@afterindenttrue to have indent.

\def\@chapter[#1]#2{\ifnum \c@secnumdepth >\m@ne
        \refstepcounter{chapter}
        \typeout{\@chapapp\space\bf{\thechapter}.}
        \addcontentsline{toc}{chapter}{\protect
        \numberline{\thechapter}#1}\else
      \addcontentsline{toc}{chapter}{#1}\fi
   \chaptermark{#1}
   \addtocontents{lof}{\protect\addvspace{10pt}} % Adds between-chapter space
   \addtocontents{lot}{\protect\addvspace{10pt}} % to lists of figs & tables.
   \if@twocolumn                                 % Tests for two-column mode.
           \@topnewpage[\@makechapterhead{#2}]
     \else \@makechapterhead{#2}
           \@afterheading                  % Routine called after chapter and
     \fi}                                  % section heading.

\def\@schapter#1{\if@twocolumn \@topnewpage[\@makeschapterhead{#1}]
        \else \@makeschapterhead{#1}
              \@afterheading\fi}


% *********************************
% * ALTERNATE THESIS CHAPTER FORM *
% *********************************
\def\altchapter{\clearpage      % Starts new page.
   \thispagestyle{plain}     % Page style of chapter page is 'plain'
   \global\@topnum\z@        % Prevents figures from going at top of page.
   \@afterindentfalse        % Suppresses indent in first paragraph.  Change
   \secdef\@altchapter\@saltchapter}   % to \@afterindenttrue to have indent.

\def\@altchapter[#1]#2{\ifnum \c@secnumdepth >\m@ne
        \typeout{#1}
        \addcontentsline{toc}{chapter}{#1}\else
      \addcontentsline{toc}{chapter}{#1}\fi
   \chaptermark{#1}
   \addtocontents{lof}{\protect\addvspace{10pt}} % Adds between-chapter space
   \addtocontents{lot}{\protect\addvspace{10pt}} % to lists of figs & tables.
   \if@twocolumn                                 % Tests for two-column mode.
           \@topnewpage[\@makeschapterhead{#2}]
     \else \@makeschapterhead{#2}
           \@afterheading                  % Routine called after chapter and
     \fi}                                  % section heading.

\def\@saltchapter#1{\if@twocolumn \@topnewpage[\@makeschapterhead{#1}]
        \else \@makeschapterhead{#1}
              \@afterheading\fi}

% \@startsection {NAME}{LEVEL}{INDENT}{BEFORESKIP}{AFTERSKIP}{STYLE}
%            optional * [ALTHEADING]{HEADING}
%    Generic command to start a section.
%    NAME       : e.g., 'subsection'
%    LEVEL      : a number, denoting depth of section -- e.g., chapter=1,
%                 section = 2, etc.  A section number will be printed if
%                 and only if LEVEL < or = the value of the secnumdepth
%                 counter.
%    INDENT     : Indentation of heading from left margin
%    BEFORESKIP : Absolute value = skip to leave above the heading.
%                 If negative, then paragraph indent of text following
%                 heading is suppressed.
%    AFTERSKIP  : if positive, then skip to leave below heading,
%                       else - skip to leave to right of run-in heading.
%    STYLE      : commands to set style
%  If '*' missing, then increments the counter.  If it is present, then
%  there should be no [ALTHEADING] argument.  A sectioning command
%  is normally defined to \@startsection + its first six arguments.

\def\section{\@startsection {section}{1}{\z@}{-3.5ex plus -1ex minus
    -.2ex}{2.3ex plus .2ex}{\large\sty@section}} %removed \bfseries 2006nm
\def\subsection{\@startsection{subsection}{2}{\z@}{-3.25ex plus -1ex minus
   -.2ex}{1.0ex plus .2ex}{\normalsize\sty@subsection}} %removed \bfseries 2006nm
\def\subsubsection{\@startsection{subsubsection}{3}{\z@}{-3.25ex plus -1ex minus
   -.2ex}{1.0ex plus .2ex}{\itshape\normalsize\sty@subsubsection}} %removed \bfseries 2006nm
\def\paragraph{\@startsection
     {paragraph}{4}{\z@}{2.25ex plus 1ex minus .2ex}{-1em}{\itshape\normalsize\sty@paragraph}} %removed \bfseries 2006nm
\def\subparagraph{\@startsection
     {subparagraph}{4}{\parindent}{2.25ex plus 1ex minus
     .2ex}{-1em}{\normalsize\sty@subparagraph}} %removed \bfseries 2006nm

% Default initializations of \...mark commands.  (See below for their
% us in defining page styles.
%

\def\chaptermark#1{}
% \def\sectionmark#1{}           % Preloaded definitions
% \def\subsectionmark#1{}
% \def\subsubsectionmark#1{}
% \def\paragraphmark#1{}
% \def\subparagraphmark#1{}

% The value of the counter secnumdepth gives the depth of the
% highest-level sectioning command that is to produce section numbers.
%

\setcounter{secnumdepth}{2}

% APPENDIX
%
% The \appendix command must do the following:
%    -- reset the chapter counter to zero
%    -- set \@chapapp to Appendix (for messages)
%    -- redefine the chapter counter to produce appendix numbers
%    -- reset the section counter to zero
%    -- redefine the \chapter command if appendix titles and headings are
%       to look different from chapter titles and headings.

\def\appendix{\par
  \setcounter{chapter}{0}
  \setcounter{section}{0}
  \def\@chapapp{\bf{Appendix}}
  \def\thechapter{\Alph{chapter}}}

%    ****************************************
%    *                LISTS                 *
%    ****************************************
%

% The following commands are used to set the default values for the list
% environment's parameters. See the LaTeX manual for an explanation of
% the meanings of the parameters.  Defaults for the list environment are
% set as follows.  First, \rightmargin, \listparindent and \itemindent
% are set to 0pt.  Then, for a Kth level list, the command \@listK is
% called, where 'K' denotes 'i', 'ii', ... , 'vi'.  (I.e., \@listiii is
% called for a third-level list.)  By convention, \@listK should set
% \leftmargin to \leftmarginK.
%
% For efficiency, level-one list's values are defined at top level, and
% \@listi is defined to set only \leftmargin.

\leftmargini 3em
\leftmarginii 3em     % > \labelsep + width of '(m)'
\leftmarginiii 3em   % > \labelsep + width of 'vii.'
\leftmarginiv 3em     % > \labelsep + width of 'M.'
\leftmarginv 3em
\leftmarginvi 3em

\leftmargin\leftmargini
\labelwidth\leftmargini\advance\labelwidth-\labelsep
\labelsep .5em
\parsep 5pt plus 2.5pt minus 1pt

\def\@listi{\leftmargin\leftmargini}

\def\@listii{\leftmargin\leftmarginii
   \labelwidth\leftmarginii\advance\labelwidth-\labelsep
   \topsep 5pt plus 2.5pt minus 1pt
   \parsep 2.5pt plus 1pt minus 1pt
   \itemsep \parsep}

\def\@listiii{\leftmargin\leftmarginiii
    \labelwidth\leftmarginiii\advance\labelwidth-\labelsep
    \topsep 2.5pt plus 1pt minus 1pt
    \parsep \z@ \partopsep 1pt plus 0pt minus 1pt
    \itemsep \topsep}

\def\@listiv{\leftmargin\leftmarginiv
     \labelwidth\leftmarginiv\advance\labelwidth-\labelsep}

\def\@listv{\leftmargin\leftmarginv
     \labelwidth\leftmarginv\advance\labelwidth-\labelsep}

\def\@listvi{\leftmargin\leftmarginvi
     \labelwidth\leftmarginvi\advance\labelwidth-\labelsep}