| layout | title | ref | framework | rating | published | description |
|---|---|---|---|---|---|---|
post |
CGGeometry |
CoreGraphics |
8.0 |
true |
Unless you were a Math Geek or an Ancient Greek, Geometry was probably not your favorite subject in high school. No, chances are that you were that kid in class who dutifully programmed all of the necessary formulæ into your TI-8X calculator. Keeping in the tradition of doing the least amount of math possible, here are some semi-obscure CoreGraphics functions to make your job easier. |
Unless you were a Math Geek or an Ancient Greek, Geometry was probably not your favorite subject in high school. No, chances are that you were that kid in class who dutifully programmed all of the necessary formulæ into your TI-8X calculator.
So for those of you who spent more time learning TI-BASIC than Euclidean geometry, here's the cheat-sheet for how geometry works in Quartz 2D, the drawing system used in iOS and Mac OS X:
-
A
CGPointis a struct that represents a point in a two-dimensional coordinate system. For iOS, the origin is at the top-left, so points move right and down as theirxandyvalues, respectively, increase. OS X, by contrast, is oriented with(0, 0)in the bottom left, withymoving up as it increases. -
A
CGSizeis a struct that represents the dimensions ofwidthandheight. -
A
CGRectis a struct with both aCGPoint(origin) and aCGSize(size), representing a rectangle drawn from itsoriginpoint with thewidthandheightof itssize.
Because CGRect is used to represent the frame of every view drawn on screen, a programmer's success in graphical programming is contingent on their ability to effectively manipulate rectangle geometry.
Fortunately for us, Quartz comes with a slew of useful functions to reduce the amount of floating point math we have to do ourselves. As central as view programming is to Cocoa, and as useful as these functions are, however, they remain relatively unknown to most iOS developers.
This will not stand! Let's shine some light on the most useful functions and save y'all some typing!
First on our list are the geometric transformations. These functions return a CGRect, which is the result of performing a particular set of operations on the passed rectangle.
CGRectOffset: Returns a rectangle with an origin that is offset from that of the source rectangle.
CGRect CGRectOffset(
CGRect rect,
CGFloat dx,
CGFloat dy
)
Consider using this anytime you're changing the origin of a rectangle. Not only can it save a line of code when changing both the horizontal and vertical position, but more importantly, it represents the translation more semantically than manipulating the origin values individually.
CGRectInset: Returns a rectangle that is smaller or larger than the source rectangle, with the same center point.
CGRect CGRectInset(
CGRect rect,
CGFloat dx,
CGFloat dy
)
Want to make a view-within-a-view look good? Give it a nice 10pt padding with CGRectInset. Keep in mind that the rectangle will be resized around its center by ± dx on its left and right edge (for a total of 2 × dx), and ± dy on its top and bottom edge (for a total of 2 × dy).
If you're using CGRectInset as a convenience function for resizing a rectangle, it is common to chain this with CGRectOffset by passing the result of CGRectInset as the rect argument in CGRectOffset.
CGRectIntegral: Returns the smallest rectangle that results from converting the source rectangle values to integers.
CGRect CGRectIntegral (
CGRect rect
)
It's important that CGRect values all are rounded to the nearest whole point. Fractional values cause the frame to be drawn on a pixel boundary. Because pixels are atomic units (cannot be subdivided†) a fractional value will cause the drawing to be averaged over the neighboring pixels, which looks blurry.
CGRectIntegral will floor each origin value, and ceil each size value, which will ensure that your drawing code will crisply align on pixel boundaries.
As a rule of thumb, if you are performing any operations that could result in fractional point values (e.g. division, CGGetMid[X|Y], or CGRectDivide), use CGRectIntegral to normalize rectangles to be set as a view frame.
† Technically, since the coordinate system operates in terms of points, Retina screens, which have 4 pixels for every point, can draw
± 0.5fpoint values on odd pixels without blurriness.
These functions provide a shorthand way to calculate interesting dimensional values about a particular CGRect.
CGRectGetMinXCGRectGetMinYCGRectGetMidXCGRectGetMidYCGRectGetMaxXCGRectGetMaxY
These six functions return the minimum, middle, or maximum x or y value for a rectangle, taking the form:
CGFloat CGRectGet[Min|Mid|Max][X|Y] (
CGRect rect
)
These functions will replace code like frame.origin.x + frame.size.width with cleaner, more semantically expressive equivalents (especially with the mid and max functions).
CGRectGetHeight: Returns the height of a rectangle.
CGFloat CGRectGetHeight (
CGRect rect
)
CGRectGetWidth: Returns the width of a rectangle.
CGFloat CGRectGetWidth (
CGRect rect
)
Much like the previous functions, CGRectGetWidth & CGRectGetHeight are often preferable to returning the corresponding member of a CGRect's size. While it's not extremely competitive in terms of character savings, remember that semantic clarity trumps brevity every time.
There are three special rectangle values, each of which have unique properties that are important to know about:
const CGRect CGRectZero: A rectangle constant with location (0,0), and width and height of 0. The zero rectangle is equivalent to CGRectMake(0.0f, 0.0f, 0.0f, 0.0f).const CGRect CGRectNull: The null rectangle. This is the rectangle returned when, for example, you intersect two disjoint rectangles. Note that the null rectangle is not the same as the zero rectangle.const CGRect CGRectInfinite: A rectangle that has infinite extent.
CGRectZero is perhaps the most useful of all of the special rectangle values. When initializing subviews, their frames are often initialized to CGRectZero, deferring their layout to -layoutSubviews.
CGRectNull is distinct from CGRectZero, despite any implied correspondence to NULL == 0. This value is conceptually similar to NSNotFound, in that it represents the absence of an expected value. Be aware of what functions can return CGRectNull, and be prepared to handle it accordingly, by testing with CGRectIsNull.
CGRectInfinite is the most exotic of all, and has some of the most interesting properties. It intersects with all points and rectangles, contains all rectangles, and its union with any rectangle is itself. Use CGRectIsInfinite to check to see if a rectangle is infinite.
Behold, the most obscure, misunderstood, and useful of the CGGeometry functions: CGRectDivide.
CGRectDivide: Divides a source rectangle into two component rectangles.
void CGRectDivide(
CGRect rect,
CGRect *slice,
CGRect *remainder,
CGFloat amount,
CGRectEdge edge
)
CGRectDivide divides a rectangle into two components in the following way:
- Take a rectangle and choose an
edge(left, right, top, or bottom). - Measure out an
amountfrom that edge. - Everything from the
edgeto the measuredamountis stored in the rectangle referenced in thesliceargument. - The rest of the original rectangle is stored in the
remainderout argument.
That edge argument takes a value from the CGRectEdge enum:
enum CGRectEdge {
CGRectMinXEdge,
CGRectMinYEdge,
CGRectMaxXEdge,
CGRectMaxYEdge
}
CGRectDivide is perfect for dividing up available space among several views (call it on subsequent remainder amounts to accommodate more than two views). Give it a try next time you're manually laying-out a UITableViewCell.
So what if you didn't pay attention in Geometry class--this is the real world, and in the real world, you have CGGeometry.h
Know it well, and you'll be on your way to discovering great new user interfaces in your apps. Do good enough of a job with that, and you may run into the greatest arithmetic problem of all: adding up all of the money you'll make with your awesome new app. Mathematical!