Skip to content

Latest commit

 

History

History
338 lines (260 loc) · 13.7 KB

README.md

File metadata and controls

338 lines (260 loc) · 13.7 KB
Raw

Leiningen REPL and BeakerX notebooks on Amazon EC2

This repo uses the Packer + Terraform combo to deploy an interactive Clojure development machine with Leiningen and BeakerX on Amazon EC2. This allows coding on a local machine while executing code directly on the AWS infrastructure with easy access to resources such as S3, EMR, Elasticsearch, etc.

The deployment involves 3 simple steps/layers:

  • provisioning an Amazon Machine Image (Packer)

  • creating a reusable EBS volume for data (Terraform)

  • creating an EC2 instance based on the above AMI and mounting the EBS volume onto it at /data (Terraform).

This project showcases the declarative and immutable paradigm of Packer and Terraform:

  • Declarative: we describe the resources we wish to create rather than the steps taken to build them or amend them,

  • Immutable: we destroy old resources and create new resources when we want to deploy changes, rather than amending existing resources.

Installation

  1. Download this repo and install Packer and Terraform on your local machine.

  2. If you don't already have one, set up an AWS account.

  3. Create an IAM Profile (e.g. terraform) to allow Packer and Terraform to manage resources. For simplicity, give it AmazonEC2FullAccess permissions and and an IAMPassRole inline policy (see Packer's and Terraform's online doc to narrow the permissions to what is strictly necessary). Register this profile in your local ~/.aws/credentials file.

  4. Still in IAM, create an IAM role for the instance, with access to the AWS services that you'll wish to access via the instance.

  5. In EC2, create the following resources so that Terraform can ssh onto the instance:

    • A key pair, which the ssh server on the instance will use to authenticate connections; download the private key onto your local machine (.pem file).

    • A security group (firewall rules) that provides inbound TCP access to a port of your choosing for ssh access.

Usage

Step 1: Burning the AMI with Packer

Edit the variables in packer/images.json to match the IAM profile that you've set up earlier on, the AWS region and the ID of the latest Amazon Linux 2 AMI (for SSD/gp2 EBS volume) in that region.

"variables": {
    "profile": "terraform",
    "region": "eu-west-1",
    "ami": "ami-0bdb1d6c15a40392c"
  }

Edit the dependencies in packer/files/.packer/project.clj to amend the list of pre-loaded Clojure libraries.

In the packer directory, run packer build image.json. This will create the new image and install Leiningen, BeakerX and libraries. The image will then be ready in the EC2 image registry.

Step 2: EBS volume with Terraform

In the terraform/ebs directory, create a new terraform.tfvars file from the example file. Edit the variables to match your region and IAM profile for Terraform.

region = "eu-west-1"
availability_zone = "eu-west-1a"
profile = "terraform"

You can also edit main.tf to change volume size and type.

In the terraform/ebs directory, run terraform init and then terraform apply to create the EBS volume.

Step 3: EC2 instance with Terraform

In the terraform/ec2 directory, create a new terraform.tfvars file from the example file. Edit the variables to match your region, IAM profile for Terraform, key name, instance IAM role, security group and ssh connection parameters.

region = "eu-west-1"
availability_zone = "eu-west-1c"
profile = "terraform"
ec2_iam_role = "my-iam-role"
ec2_key_name = "my-ec2-key"
ssh_private_key_path = "/my-private-keys/my-ec2-key.pem"
ec2_security_groups = ["my-security-group"]
ssh_port = "12345"

You can also edit main.tf to change instance type, root disk size...

In the terraform/ec2 directory, run terraform init and then terraform apply. This creates the instance and mounts the EBS volume to it at /data.

Using the instance

Ssh into the instance using the port and private key (.pem file) that you've set up earlier. Instruct ssh to forward some ports from your local machine to the instance in order to locally access the remote nREPL and Jupyter notebooks. For example:

ssh -i "/my-private-keys/my-ec2-key.pem" \ 
    -p 12345 \ 
    -L 20000:localhost:20000 \
    -L 20001:localhost:20001 \
    [email protected]

You may then, via shh:

  • Start a Clojure nREPL on one of the remote forwarding ports e.g. lein :start :port 20000. Connect your local development environment to it via the matching local port. If started from the home directory ~, the REPL will use the minimal project.clj file that is pre-installed there: it will run Clojure 1.9 with the alembic library, which allows dynamically loading dependencies from the REPL. Use the /data directory to persist new projects and files on the reusable EBS volume.

  • Start Jupyter/BeakerX on one of the remote forwarding ports e.g. jupyter notebook --port=20001. In your local browser, open the authentication URL produced by Jupyter (change the port to the matching local port if different). If you start Jupyter from the /data directory, you will be be able to save notebooks on the reusable EBS volume.

Loading Clojure libraries

The Packer template pre-populates the local Maven repository ~/.m2 with selected libraries as per packer/files/.packer/project.clj. Leiningen will have access to these and will, as usual, download new libraries directly from Clojars or Maven Central into ~/.m2 if they're not already there.

BeakerX uses its own local Maven repository rather than ~/.m2, out of concern that ~/.m2 is not entirely safe for concurrent access. You can still instruct BeakerX to use ~/.m2 instead of its own repo, so that it can access the pre-loaded libraries. To do so, run %classpath config resolver mvnLocal in your Beaker notebook. The %classpath add mvn directive will then load libraries from ~/.m2.

Another reason for switching the BeakerX repo to ~/.m2 is that BeakerX can only download dependencies from Maven Central, but not from Clojars. So if you want to use a new Clojars library in BeakerX, download it first into ~/.m2 with Leiningen (with Alembic or by running lein deps over a project.clj) and then load it in BeakerX with %classpath config resolver mvnLocal and %classpath add mvn.

Because the local Maven repository ~/.m2 is located on the instance's transient root drive, it will be reset to its AMI state when the instance is destroyed/recreated with Terraform. So if you use a library frequently, burn it into the AMI with Packer via packer/files/.packer/project.clj.

Redeploying the configuration

There are a few tasks that you'll want to execute after the initial deployment, such as destroying and recreating the instance, increasing the size of the EBS volume, rolling out a new AMI, or destroying and recreating the whole stack.

In Terraform's (mostly) immutable logic, we destroy and recreate resources rather than amending/mutating them. To do this painlessly, this project follows Terraform's guidelines about breaking an overall configuration into several smaller configurations, and using data sources when a configuration needs to access access resources created by another configuration. In our case, the terraform/ec2 configuration uses data sources to locate the AMI and the EBS volume created by the terraform/ebs configuration.

Recreating the EC2 instance

In the terraform/ec2 directory, run terraform destroy. Amend the Terraform configuration file if there's any change you want to make. Later, recreate the instance with terraform apply. The new instance will be attached to the same EBS volume as before, which remains intact.

Destroying and recreating the EC2 instance is preferred to stopping and restarting it. Restarting the instance would indeed occasion a change of IP address and hence a configuration drift between EC2 and Terraform's state files. Also, relying on successive stop/restart cycles would be an encouragement to make successive and possibly undocumented amendment to the instance; wiping the slate clean every time forces us to code changes 'at the source' in the AMI.

Increasing the size of the EBS volume

This is an amendment that doesn't require destruction of the existing volume. However, you'll have to detach the volume first, which you can do by destroying the instance first. Edit terraform/ebs/main.tf with then new size and run terraform apply, after which you can recreate the instance.

You can also change the disk type and IOPS, subject to some limitations. In doubt whether a change requires destruction of a resource or not, run terraform plan.

Rolling out a new machine image

Amend the Packer template and its associated files and scripts. Run packer build image.json to create the new AMI on AWS. Destroy and recreate instance; the Terraform configuration will automatically select the latest version of the AMI.

Recreating both EBS volume and EC2 instance

Save a snapshot of the EBS volume if you wish to keep its data.

Run terraform destroy, first in terraform/ec2 and then in terraform/ebs. Amend the terraform configuration files if needed, in particular if the new EBS volume should be based on a snapshot taken earlier (see aws_ebs_volume). Then run terraform apply, first in terraform/ebs and then in terraform/ec2.

Terraform notes

Since the machine is provisioned at AMI level by Packer, our Terraform configuration is generic and directly reusable for other projects.

Below a couple of comments about the Terraform code.

Changing ssh port

The ssh port of the instance can be changed from the onset by passing a script to the user_data property of the aws_instance. This will be directly executed as root by AWS when the instance is created. The code below uses sed to replace the #Port 22 line in /etc/ssh/sshd_config with a new port, and it then restarts the ssh server:

user_data = "#!/bin/bash\nsed -i 's/#Port 22/Port ${var.ssh_port}/g' /etc/ssh/sshd_config && service sshd restart"

The user_data block is executed before Terraform runs provisioners, so Terraform provisioners only need to know about the new port.

Mounting and unmounting EBS volumes with Terraform

Terraform allows attaching an EBS volume to an EC2 instance via a resource called aws_volume_attachment. It's pretty straightforward: you specify an aws_instance and an aws_ebs_volume, and you then specify their attachment with aws_volume_attachment.

resource "aws_volume_attachment" "clojure" {
  device_name = "/dev/sdd"
  volume_id = "${data.aws_ebs_volume.clojure.id}"
  instance_id = "${aws_instance.clojure.id}"  
}

In its simplest form above, aws_volume_attachment only attaches the volume as a device (e.g. /dev/sdd), but it doesn't mount it onto a folder. Terraform will also refuse to destroy the attachment if the device is already mounted (although there is an option to add force_detach = true to force the detachment).

Getting granular control of the mounting and unmounting process with Terraform can come across as a confusing matter. However, using remote_exec provisiones within the aws_volume_attachment does provide such granular control. The key here is to give these provisioners the proper ssh connection so that they can connect to the aws_instance and run provisioning commands/scripts. Terraform's 'interpolation syntax' makes this easy, by providing the hostname of the instance via "${aws_instance.my-instance.public_dns}". Below the code of the aws_volume_attachment in terraform/ec2/main.tf:

resource "aws_volume_attachment" "clojure" {
  device_name = "/dev/sdd"
  volume_id = "${data.aws_ebs_volume.clojure.id}"
  instance_id = "${aws_instance.clojure.id}"
  connection {
    type = "ssh"
    user = "ec2-user"
    host = "${aws_instance.clojure.public_dns}"
    port = "${var.ssh_port}"
    private_key = "${file(var.ssh_private_key_path)}"
  }
  provisioner "remote-exec" {
    script = "scripts/ebs-mount"
  }
  provisioner "remote-exec" {
    when = "destroy"
    script = "scripts/ebs-unmount"
  }
}

The result of this code is that Terraform will run ebs-mount via ssh onto the instance once the attachment is created; and it will run ebs-unmount before destroying the attachment. My codes for ebs-mount and ebs-unmount can be found in ec2/scripts. ebs-mount detects whether the volume needs to be formatted or not before mounting. ebs-unmount sends a kill signal to processes that use the device before unmounting it. I'm not a linux expert though, and these scripts can certainly be improved. Nevertheless, using remote_exec provisioners as above seems an idiomatic way to mount/unmount volumes via aws_volume_attachment and to tailor the process to one's needs.

License

Copyright © 2018 Nicolas Duchenne, Belove Ltd, London, UK

Distributed under the Creative Commons Attribution 4.0 (CC BY 4.0) license.