Replies: 18 comments 3 replies
-
Thanks for opening your first issue here! Be sure to follow the issue template! |
Beta Was this translation helpful? Give feedback.
-
Could you please take look at the /var/log/cloudstack/management/management-server.log for any other exceptions and can you provide the log to investigate further |
Beta Was this translation helpful? Give feedback.
-
Here is the recent logs: root@ubuntu:~# tail -f /var/log/cloudstack/management/management-server.log
|
Beta Was this translation helpful? Give feedback.
-
Additionally, I found that the port 8250 is not listening in my cloudstack host server. |
Beta Was this translation helpful? Give feedback.
-
the logs show
there should be some errors in log like |
Beta Was this translation helpful? Give feedback.
-
@weizhouapache Sorry I didn't get your point. Also, I couldn't find any errors related to the cloud stack agent on the cloud stack management-server.log. |
Beta Was this translation helpful? Give feedback.
-
the logs shows the mgmt server has connected to the host and configured security (for cloudstack-agent and libvirt). so it is not a connectivity issue. please upload the full log by keyword |
Beta Was this translation helpful? Give feedback.
-
@weizhouapache Here is the full log with keyword: ctx-6dbc68fe: root@ubuntu:~# cat /var/log/cloudstack/management/management-server.log | grep ctx-6dbc68fe
|
Beta Was this translation helpful? Give feedback.
-
@subincb30 |
Beta Was this translation helpful? Give feedback.
-
@weizhouapache Please find the log below: root@host:~# tail -f /var/log/cloudstack/agent/setup.log
|
Beta Was this translation helpful? Give feedback.
-
Someone please help me to resolve the issue. |
Beta Was this translation helpful? Give feedback.
-
@subincb30 |
Beta Was this translation helpful? Give feedback.
-
Can you give me complete guide for that? I got some doc for for that but it was not clear. But, I found one new network interface in my server. 5: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default qlen 1000
|
Beta Was this translation helpful? Give feedback.
-
@subincb30 |
Beta Was this translation helpful? Give feedback.
-
@weizhouapache I already checked this earlier. But, I am little bit confussed on it. I will paste my current netplan settings below. root@host:~# cat /etc/netplan/00-installer-config.yaml This is the network config written by 'subiquity'network:
|
Beta Was this translation helpful? Give feedback.
-
@subincb30 |
Beta Was this translation helpful? Give feedback.
-
@weizhouapache Yes I saw that. But some parameters are confusing for me. Can you check my current settings which I shared earlier and give an example accordingly? |
Beta Was this translation helpful? Give feedback.
-
I added cloudbr0. Now I am able to add the host server to management server. |
Beta Was this translation helpful? Give feedback.
-
I am using 4.19 version on cloudstack management and cloudstack host server. But, I am unable to add the host server to management server. Both are Ubuntu 22.04 server.
Getting the following error:
Error 530
Unable to add the host: Cannot find the server resources at http://192.168.200.238
Able to get ping response from host and management server:
From management server
root@ubuntu:~# ping 192.168.200.238
PING 192.168.200.238 (192.168.200.238) 56(84) bytes of data.
64 bytes from 192.168.200.238: icmp_seq=1 ttl=64 time=2.00 ms
64 bytes from 192.168.200.238: icmp_seq=2 ttl=64 time=1.42 ms
From the hots server
root@host:~# ping 192.168.200.215
PING 192.168.200.215 (192.168.200.215) 56(84) bytes of data.
64 bytes from 192.168.200.215: icmp_seq=1 ttl=64 time=1.98 ms
64 bytes from 192.168.200.215: icmp_seq=2 ttl=64 time=1.98 ms
64 bytes from 192.168.200.215: icmp_seq=3 ttl=64 time=2.00 ms
Beta Was this translation helpful? Give feedback.
All reactions