Skip to content

Latest commit

 

History

History
88 lines (57 loc) · 3.44 KB

BUILDING.md

File metadata and controls

88 lines (57 loc) · 3.44 KB
Raw

Building Piggui and Piglet from source

NOTE: For details on building porky the embedded binary for Pi Pico W devices, see porky/BUILDING.md

NOTE: These instructions below apply equally, whether you have cloned the repo or have downloaded and exploded the source tarball/zip of a release.

NOTE: None of the developers currently has a Windows machine, so we have been unable to test this on Windows.

cd

into the pigg project root folder (where you can see Cargo.toml for example) and then follow the instructions below to build from source.

Building on host machine

make

This will run clippy, build, and run tests, generating these binaries:

  • target/debug/piggui - GUI with a GPIO backend and ability to connect to remote piglet and porky devices
  • target/debug/piglet - CLI with a GPIO backend
  • porky/target/thumbv6m-none-eabi/release/porky - an executable for use on Raspberry Pi Pico W

By default, cargo (used by make) compiles for the machine it is running on. For cross-compiling for a Raspberry Pi on a different host see later section.

GPIO Backends

If built for macOS, linux, Windows (building on the same OS) the GPIO backend of piggui and piglet will be a simulated backend to show the features and ease development.

If built for a Raspberry Pi (building on the Pi or cross compiling for it) the GPIO backend will interact with the real GPIO hardware present.

Running directly

  • Use make run to start a debug build of piggui
  • Use "make run-release" to start a release build of piggui
  • Use make run-piglet to start a debug build of piglet
  • Use "make run-release-piglet" to start a release build of piglet

Building for Pi on a Pi

NOTE: For this option you will need a working rust toolchain installed on your Raspberry Pi. Also, these builds make take a very long time. Large intermediate files are also generated and can fill-up the storage of your Pi.

On your Raspberry Pi, use make to build and make run (etc) as above.

Building for Pi on another host

You can cross compile for a Raspberry Pi device on a macOS/Windows/Linux host and take advantage of the increased computing power to reduce compile times.

Relevant Makefile targets for armv7 and aarch64 architectures are:

  • [armv7 | aarch64] - will run clippy and build
  • [clippy-armv7 | clippy-aarch64] - will run clippy
  • [build-armv7 | build-aarch64] - will run build
  • [release-build-armv7 | release-build-aarch64] - will run a release build
  • [test-armv7 | test-aarch64] - will run tests

These targets will build binary files for piggui and piglet in the target/{architecture}/{release or debug}/ directory.

Being built for the Raspberry Pi, these binaries will have real GPIO backends that interact with the real Raspberry Pi hardware.

Helper Env vars

There are a couple of env vars that can be setup to help you interact with your Raspberry Pi.

You can set these up in your env, so you always have them, or set them on the command line when invoking make

  • PI_TARGET Which Pi to copy files to and ssh into
  • PI_USER The username of your user on the pi, to be able to copy files and ssh into it

Example: PI_TARGET=pizero2w0.local PI_USER=andrew make copy-armv7

Copying and Running binaries on a Raspberry Pi from a host

  • [copy-armv7 | copy-aarch64] to copy the built binaries to your Raspberry Pi
  • make ssh to ssh into your Pi to be able to run the binaries.