Bridge mode not working

[WifiHero91]

Dear Lilygo!

I got the two T-halow but in bridge mode it is not working. They connected state got by AT+CONN_STATE command but none of a packet go trought the bridge. I read some other buyer has the same issue and they got now chips what solved the problem.

Please send me the right chips.

[email protected]
order number: LILYGO-25417

Thank you!
Kind Regards,
Imre Varga

[WifiHero91]

It is still problem. I bought product what is not working and Lilygo support doesnt want to solve it.

[ShallowGreen123]

You can try sending AT+LOADDEF=1 to reset each T-Halow, and then try it again in your own way;

Note that after assigning the address, ping the address of the Ethernet adapter Ethernet network segment

[WifiHero91]

What is Ethernet adapter Ethernet network segment? Do i need to ping my ethernet interface address? It doesn't matter because BROADCAST messages doesn't go over the WB. For Broadcast messages you dont need the ARP table.....
Please send new flash like alphafox02 with the right WB version!

[ShallowGreen123]

You can try to use AT+VERSION=? to check the firmware version of the TX-AH module. The firmware in bridge mode is VERSION:v1.6.4.3-xxxxx.

If it is another version, please replace the firmware chip that comes with lilygo;

If there is no VERSION:v1.6.4.3-xxxxx firmware chip, you can ask after-sales service to send you a replacement one.

[WifiHero91]

Thank You! The version is different!

[WifiHero91]

@ShallowGreen123 What is email address where I can ask for new flash?

[ShallowGreen123]

It seems that the firmware version is wrong if it doesn't work;

There should be a flash chip in the product package, just replace it; here is a demonstration video:
https://www.youtube.com/watch?v=nM2GE8Imshc

If there is indeed no flash in the product package, contact after-sales service to reissue it; or after seeing this reply, confirm that there is no flash in the product package, I can also help feedback;

[WifiHero91]

@ShallowGreen123 I changed to the other flash in the zip lock bag and also got different version.

[ShallowGreen123]

It seems that I did not send you the correct bridge firmware, you can give feedback to the after-sales