Vitrobian is basically a Debian image with the modifications necessary to
support the Vitro Crystal platform.
The latest, pre-build image can be downloaded from the following link
Take a look at the etcher
gzip -cdk vitrobian_0.2.0.img.gz | sudo dd of=/dev/sdX bs=16M status=progress
Replacing sdX with the descriptor of the block device corresponding to the
SD card. For instance:
gzip -cdk vitrobian_0.2.0.img.gz | sudo dd of=/dev/sdc bs=16M status=progress
Login: user
Password: user
The Debian image is assembled using the
debos utility, which uses the Debian
package feed beneath. Stuff not available in official Debian packages will be
built from sources and then downloaded into the final image.
.
├── components
│ └── boot-files
├── debian
│ ├── debimage-crystal.yaml
│ ├── networkd
│ ├── README.md
│ ├── setup-networking.sh
│ ├── setup-user.sh
├── README.md
└── VERSION
This contains scripts for building all the prerequisites which needs to be prepared prior to the image assembly.
It contains scripts for building U-Boot and Linux devicetree which support
Vitro Crystal board. Built binaries are released and uploaded to the AWS S3
bucket. They can be downloaded later by anyone who is performing the image
build.
This contains debos YAML recipe as well as scripts and overlay configuration
files which are used during the image assembly phase.
In order to build the Vitrobian image, refer to the
README in debian directory