diff --git a/model/prelude_mem.sail b/model/prelude_mem.sail index c4f3d0710..c2488eff2 100644 --- a/model/prelude_mem.sail +++ b/model/prelude_mem.sail @@ -24,8 +24,15 @@ because it means width argument can be fast native integer. It would be even better if it could be <= 8 bytes so that data can also be a 64-bit int but CHERI needs 128-bit accesses for - capabilities and SIMD / vector instructions will also need more. */ -type max_mem_access : Int = 16 + capabilities and SIMD / vector instructions will also need more. + + The specific value does not matter (if it is >8) since anything up + to 2^64-1 will result in a native int being used for the width type. + + 4096 was chosen because it is a page size, and a reasonable maximum + for cbo.zero. + */ +type max_mem_access : Int = 4096 val write_ram = {lem: "write_ram", coq: "write_ram"} : forall 'n, 0 < 'n <= max_mem_access . (write_kind, xlenbits, int('n), bits(8 * 'n), mem_meta) -> bool function write_ram(wk, addr, width, data, meta) = { diff --git a/model/riscv_addr_checks.sail b/model/riscv_addr_checks.sail index f9c783574..0d29d4ca4 100644 --- a/model/riscv_addr_checks.sail +++ b/model/riscv_addr_checks.sail @@ -54,7 +54,7 @@ type ext_data_addr_error = unit /* Default data addr is just base register + immediate offset (may be zero). Extensions might override and add additional checks. */ -function ext_data_get_addr(base : regidx, offset : xlenbits, acc : AccessType(ext_access_type), width : word_width) +function ext_data_get_addr(base : regidx, offset : xlenbits, acc : AccessType(ext_access_type), width : range(1, max_mem_access)) -> Ext_DataAddr_Check(ext_data_addr_error) = let addr = X(base) + offset in Ext_DataAddr_OK(addr) diff --git a/model/riscv_insts_aext.sail b/model/riscv_insts_aext.sail index 0f4da8372..0e0a52b32 100644 --- a/model/riscv_insts_aext.sail +++ b/model/riscv_insts_aext.sail @@ -65,7 +65,7 @@ function clause execute(LOADRES(aq, rl, rs1, width, rd)) = { /* Get the address, X(rs1) (no offset). * Extensions might perform additional checks on address validity. */ - match ext_data_get_addr(rs1, zeros(), Read(Data), width) { + match ext_data_get_addr(rs1, zeros(), Read(Data), size_bytes(width)) { Ext_DataAddr_Error(e) => { ext_handle_data_check_error(e); RETIRE_FAIL }, Ext_DataAddr_OK(vaddr) => { let aligned : bool = @@ -126,7 +126,7 @@ function clause execute (STORECON(aq, rl, rs2, rs1, width, rd)) = { /* Get the address, X(rs1) (no offset). * Extensions might perform additional checks on address validity. */ - match ext_data_get_addr(rs1, zeros(), Write(Data), width) { + match ext_data_get_addr(rs1, zeros(), Write(Data), size_bytes(width)) { Ext_DataAddr_Error(e) => { ext_handle_data_check_error(e); RETIRE_FAIL }, Ext_DataAddr_OK(vaddr) => { let aligned : bool = @@ -216,7 +216,7 @@ function clause execute (AMO(op, aq, rl, rs2, rs1, width, rd)) = { /* Get the address, X(rs1) (no offset). * Some extensions perform additional checks on address validity. */ - match ext_data_get_addr(rs1, zeros(), ReadWrite(Data, Data), width) { + match ext_data_get_addr(rs1, zeros(), ReadWrite(Data, Data), size_bytes(width)) { Ext_DataAddr_Error(e) => { ext_handle_data_check_error(e); RETIRE_FAIL }, Ext_DataAddr_OK(vaddr) => { match translateAddr(vaddr, ReadWrite(Data, Data)) { diff --git a/model/riscv_insts_base.sail b/model/riscv_insts_base.sail index 9c4630b33..d28f51d7b 100644 --- a/model/riscv_insts_base.sail +++ b/model/riscv_insts_base.sail @@ -326,7 +326,7 @@ function clause execute(LOAD(imm, rs1, rd, is_unsigned, width, aq, rl)) = { let offset : xlenbits = sign_extend(imm); /* Get the address, X(rs1) + offset. Some extensions perform additional checks on address validity. */ - match ext_data_get_addr(rs1, offset, Read(Data), width) { + match ext_data_get_addr(rs1, offset, Read(Data), size_bytes(width)) { Ext_DataAddr_Error(e) => { ext_handle_data_check_error(e); RETIRE_FAIL }, Ext_DataAddr_OK(vaddr) => if check_misaligned(vaddr, width) @@ -382,7 +382,7 @@ function clause execute (STORE(imm, rs2, rs1, width, aq, rl)) = { let offset : xlenbits = sign_extend(imm); /* Get the address, X(rs1) + offset. Some extensions perform additional checks on address validity. */ - match ext_data_get_addr(rs1, offset, Write(Data), width) { + match ext_data_get_addr(rs1, offset, Write(Data), size_bytes(width)) { Ext_DataAddr_Error(e) => { ext_handle_data_check_error(e); RETIRE_FAIL }, Ext_DataAddr_OK(vaddr) => if check_misaligned(vaddr, width) diff --git a/model/riscv_insts_fext.sail b/model/riscv_insts_fext.sail index e4afb30d5..664495450 100644 --- a/model/riscv_insts_fext.sail +++ b/model/riscv_insts_fext.sail @@ -315,7 +315,7 @@ function clause execute(LOAD_FP(imm, rs1, rd, width)) = { let offset : xlenbits = sign_extend(imm); /* Get the address, X(rs1) + offset. Some extensions perform additional checks on address validity. */ - match ext_data_get_addr(rs1, offset, Read(Data), width) { + match ext_data_get_addr(rs1, offset, Read(Data), size_bytes(width)) { Ext_DataAddr_Error(e) => { ext_handle_data_check_error(e); RETIRE_FAIL }, Ext_DataAddr_OK(vaddr) => if check_misaligned(vaddr, width) @@ -381,7 +381,7 @@ function clause execute (STORE_FP(imm, rs2, rs1, width)) = { let (aq, rl, con) = (false, false, false); /* Get the address, X(rs1) + offset. Some extensions perform additional checks on address validity. */ - match ext_data_get_addr(rs1, offset, Write(Data), width) { + match ext_data_get_addr(rs1, offset, Write(Data), size_bytes(width)) { Ext_DataAddr_Error(e) => { ext_handle_data_check_error(e); RETIRE_FAIL }, Ext_DataAddr_OK(vaddr) => if check_misaligned(vaddr, width) diff --git a/model/riscv_insts_vext_mem.sail b/model/riscv_insts_vext_mem.sail index ce9cd6237..4da82e18f 100644 --- a/model/riscv_insts_vext_mem.sail +++ b/model/riscv_insts_vext_mem.sail @@ -81,7 +81,7 @@ function process_vlseg (nf, vm, vd, load_width_bytes, rs1, EMUL_pow, num_elem) = vstart = to_bits(16, i); foreach (j from 0 to (nf - 1)) { let elem_offset = (i * nf + j) * load_width_bytes; - match ext_data_get_addr(rs1, to_bits(sizeof(xlen), elem_offset), Read(Data), width_type) { + match ext_data_get_addr(rs1, to_bits(sizeof(xlen), elem_offset), Read(Data), load_width_bytes) { Ext_DataAddr_Error(e) => { ext_handle_data_check_error(e); return RETIRE_FAIL }, Ext_DataAddr_OK(vaddr) => if check_misaligned(vaddr, width_type) @@ -149,7 +149,7 @@ function process_vlsegff (nf, vm, vd, load_width_bytes, rs1, EMUL_pow, num_elem) if vm_val[i] then { /* active segments */ foreach (j from 0 to (nf - 1)) { let elem_offset = (i * nf + j) * load_width_bytes; - match ext_data_get_addr(rs1, to_bits(sizeof(xlen), elem_offset), Read(Data), width_type) { + match ext_data_get_addr(rs1, to_bits(sizeof(xlen), elem_offset), Read(Data), load_width_bytes) { Ext_DataAddr_Error(e) => { if i == 0 then { ext_handle_data_check_error(e); return RETIRE_FAIL } else { @@ -251,7 +251,7 @@ function process_vsseg (nf, vm, vs3, load_width_bytes, rs1, EMUL_pow, num_elem) vstart = to_bits(16, i); foreach (j from 0 to (nf - 1)) { let elem_offset = (i * nf + j) * load_width_bytes; - match ext_data_get_addr(rs1, to_bits(sizeof(xlen), elem_offset), Write(Data), width_type) { + match ext_data_get_addr(rs1, to_bits(sizeof(xlen), elem_offset), Write(Data), load_width_bytes) { Ext_DataAddr_Error(e) => { ext_handle_data_check_error(e); return RETIRE_FAIL }, Ext_DataAddr_OK(vaddr) => if check_misaligned(vaddr, width_type) @@ -322,7 +322,7 @@ function process_vlsseg (nf, vm, vd, load_width_bytes, rs1, rs2, EMUL_pow, num_e vstart = to_bits(16, i); foreach (j from 0 to (nf - 1)) { let elem_offset = i * rs2_val + j * load_width_bytes; - match ext_data_get_addr(rs1, to_bits(sizeof(xlen), elem_offset), Read(Data), width_type) { + match ext_data_get_addr(rs1, to_bits(sizeof(xlen), elem_offset), Read(Data), load_width_bytes) { Ext_DataAddr_Error(e) => { ext_handle_data_check_error(e); return RETIRE_FAIL }, Ext_DataAddr_OK(vaddr) => if check_misaligned(vaddr, width_type) @@ -388,7 +388,7 @@ function process_vssseg (nf, vm, vs3, load_width_bytes, rs1, rs2, EMUL_pow, num_ vstart = to_bits(16, i); foreach (j from 0 to (nf - 1)) { let elem_offset = i * rs2_val + j * load_width_bytes; - match ext_data_get_addr(rs1, to_bits(sizeof(xlen), elem_offset), Write(Data), width_type) { + match ext_data_get_addr(rs1, to_bits(sizeof(xlen), elem_offset), Write(Data), load_width_bytes) { Ext_DataAddr_Error(e) => { ext_handle_data_check_error(e); return RETIRE_FAIL }, Ext_DataAddr_OK(vaddr) => if check_misaligned(vaddr, width_type) @@ -460,7 +460,7 @@ function process_vlxseg (nf, vm, vd, EEW_index_bytes, EEW_data_bytes, EMUL_index vstart = to_bits(16, i); foreach (j from 0 to (nf - 1)) { let elem_offset : int = signed(vs2_val[i]) + j * EEW_data_bytes; - match ext_data_get_addr(rs1, to_bits(sizeof(xlen), elem_offset), Read(Data), width_type) { + match ext_data_get_addr(rs1, to_bits(sizeof(xlen), elem_offset), Read(Data), EEW_data_bytes) { Ext_DataAddr_Error(e) => { ext_handle_data_check_error(e); return RETIRE_FAIL }, Ext_DataAddr_OK(vaddr) => if check_misaligned(vaddr, width_type) @@ -551,7 +551,7 @@ function process_vsxseg (nf, vm, vs3, EEW_index_bytes, EEW_data_bytes, EMUL_inde vstart = to_bits(16, i); foreach (j from 0 to (nf - 1)) { let elem_offset : int = signed(vs2_val[i]) + j * EEW_data_bytes; - match ext_data_get_addr(rs1, to_bits(sizeof(xlen), elem_offset), Write(Data), width_type) { + match ext_data_get_addr(rs1, to_bits(sizeof(xlen), elem_offset), Write(Data), EEW_data_bytes) { Ext_DataAddr_Error(e) => { ext_handle_data_check_error(e); return RETIRE_FAIL }, Ext_DataAddr_OK(vaddr) => if check_misaligned(vaddr, width_type) @@ -644,7 +644,7 @@ function process_vlre (nf, vd, load_width_bytes, rs1, elem_per_reg) = { foreach (i from elem_to_align to (elem_per_reg - 1)) { vstart = to_bits(16, cur_elem); let elem_offset = cur_elem * load_width_bytes; - match ext_data_get_addr(rs1, to_bits(sizeof(xlen), elem_offset), Read(Data), width_type) { + match ext_data_get_addr(rs1, to_bits(sizeof(xlen), elem_offset), Read(Data), load_width_bytes) { Ext_DataAddr_Error(e) => { ext_handle_data_check_error(e); return RETIRE_FAIL }, Ext_DataAddr_OK(vaddr) => if check_misaligned(vaddr, width_type) @@ -668,7 +668,7 @@ function process_vlre (nf, vd, load_width_bytes, rs1, elem_per_reg) = { foreach (i from 0 to (elem_per_reg - 1)) { vstart = to_bits(16, cur_elem); let elem_offset = cur_elem * load_width_bytes; - match ext_data_get_addr(rs1, to_bits(sizeof(xlen), elem_offset), Read(Data), width_type) { + match ext_data_get_addr(rs1, to_bits(sizeof(xlen), elem_offset), Read(Data), load_width_bytes) { Ext_DataAddr_Error(e) => { ext_handle_data_check_error(e); return RETIRE_FAIL }, Ext_DataAddr_OK(vaddr) => if check_misaligned(vaddr, width_type) @@ -726,7 +726,7 @@ function process_vsre (nf, load_width_bytes, rs1, vs3, elem_per_reg) = { foreach (i from elem_to_align to (elem_per_reg - 1)) { vstart = to_bits(16, cur_elem); let elem_offset : int = cur_elem * load_width_bytes; - match ext_data_get_addr(rs1, to_bits(sizeof(xlen), elem_offset), Write(Data), width_type) { + match ext_data_get_addr(rs1, to_bits(sizeof(xlen), elem_offset), Write(Data), load_width_bytes) { Ext_DataAddr_Error(e) => { ext_handle_data_check_error(e); return RETIRE_FAIL }, Ext_DataAddr_OK(vaddr) => if check_misaligned(vaddr, width_type) @@ -760,7 +760,7 @@ function process_vsre (nf, load_width_bytes, rs1, vs3, elem_per_reg) = { foreach (i from 0 to (elem_per_reg - 1)) { vstart = to_bits(16, cur_elem); let elem_offset = cur_elem * load_width_bytes; - match ext_data_get_addr(rs1, to_bits(sizeof(xlen), elem_offset), Write(Data), width_type) { + match ext_data_get_addr(rs1, to_bits(sizeof(xlen), elem_offset), Write(Data), load_width_bytes) { Ext_DataAddr_Error(e) => { ext_handle_data_check_error(e); return RETIRE_FAIL }, Ext_DataAddr_OK(vaddr) => if check_misaligned(vaddr, width_type) @@ -828,7 +828,7 @@ function process_vm(vd_or_vs3, rs1, num_elem, evl, op) = { if i < evl then { /* active elements */ vstart = to_bits(16, i); if op == VLM then { /* load */ - match ext_data_get_addr(rs1, to_bits(sizeof(xlen), i), Read(Data), width_type) { + match ext_data_get_addr(rs1, to_bits(sizeof(xlen), i), Read(Data), 1) { Ext_DataAddr_Error(e) => { ext_handle_data_check_error(e); return RETIRE_FAIL }, Ext_DataAddr_OK(vaddr) => if check_misaligned(vaddr, width_type) @@ -844,7 +844,7 @@ function process_vm(vd_or_vs3, rs1, num_elem, evl, op) = { } } } else if op == VSM then { /* store */ - match ext_data_get_addr(rs1, to_bits(sizeof(xlen), i), Write(Data), width_type) { + match ext_data_get_addr(rs1, to_bits(sizeof(xlen), i), Write(Data), 1) { Ext_DataAddr_Error(e) => { ext_handle_data_check_error(e); return RETIRE_FAIL }, Ext_DataAddr_OK(vaddr) => if check_misaligned(vaddr, width_type)