diff --git a/vendor/agriseen/agriseen_logo.png b/vendor/agriseen/agriseen_logo.png new file mode 100644 index 0000000000..63cdf233de Binary files /dev/null and b/vendor/agriseen/agriseen_logo.png differ diff --git a/vendor/agriseen/ga5067-profile-868.yaml b/vendor/agriseen/ga5067-profile-868.yaml new file mode 100644 index 0000000000..1f0998f81c --- /dev/null +++ b/vendor/agriseen/ga5067-profile-868.yaml @@ -0,0 +1,52 @@ +# Vendor profile ID, can be freely issued by the vendor +# This vendor profile ID is also used on the QR code for LoRaWAN devices, see +# https://lora-alliance.org/sites/default/files/2020-10/LoRa_Alliance_Vendor_ID_for_QR_Code.pdf +vendorProfileID: 0 + +# LoRaWAN MAC version: 1.0, 1.0.1, 1.0.2, 1.0.3, 1.0.4 or 1.1 +macVersion: 1.0.3 +# LoRaWAN Regional Parameters version. Values depend on the LoRaWAN version: +# 1.0: TS001-1.0 +# 1.0.1: TS001-1.0.1 +# 1.0.2: RP001-1.0.2 or RP001-1.0.2-RevB +# 1.0.3: RP001-1.0.3-RevA +# 1.0.4: RP002-1.0.0 or RP002-1.0.1 +# 1.1: RP001-1.1-RevA or RP001-1.1-RevB +regionalParametersVersion: RP001-1.0.3-RevA + +# Whether the end device supports join (OTAA) or not (ABP) +supportsJoin: true +# If your device is an ABP device (supportsJoin is false), uncomment the following fields: +# RX1 delay +#rx1Delay: 5 +# RX1 data rate offset +#rx1DataRateOffset: 0 +# RX2 data rate index +#rx2DataRateIndex: 0 +# RX2 frequency (MHz) +#rx2Frequency: 869.525 +# Factory preset frequencies (MHz) +#factoryPresetFrequencies: [868.1, 868.3, 868.5, 867.1, 867.3, 867.5, 867.7, 867.9] + +# Maximum EIRP +maxEIRP: 16 +# Whether the end device supports 32-bit frame counters +supports32bitFCnt: true + +# Whether the end device supports class B +supportsClassB: false +# If your device supports class B, uncomment the following fields: +# Maximum delay for the end device to answer a MAC request or confirmed downlink frame (seconds) +#classBTimeout: 60 +# Ping slot period (seconds) +#pingSlotPeriod: 128 +# Ping slot data rate index +#pingSlotDataRateIndex: 0 +# Ping slot frequency (MHz). Set to 0 if the band supports ping slot frequency hopping. +#pingSlotFrequency: 869.525 + +# Whether the end device supports class C +supportsClassC: false +# If your device supports class C, uncomment the following fields: +# Maximum delay for the end device to answer a MAC request or confirmed downlink frame (seconds) +#classCTimeout: 60 diff --git a/vendor/agriseen/ga5067-profile-915.yaml b/vendor/agriseen/ga5067-profile-915.yaml new file mode 100644 index 0000000000..e6bdd4ba95 --- /dev/null +++ b/vendor/agriseen/ga5067-profile-915.yaml @@ -0,0 +1,52 @@ +# Vendor profile ID, can be freely issued by the vendor +# This vendor profile ID is also used on the QR code for LoRaWAN devices, see +# https://lora-alliance.org/sites/default/files/2020-10/LoRa_Alliance_Vendor_ID_for_QR_Code.pdf +vendorProfileID: 0 + +# LoRaWAN MAC version: 1.0, 1.0.1, 1.0.2, 1.0.3, 1.0.4 or 1.1 +macVersion: 1.0.3 +# LoRaWAN Regional Parameters version. Values depend on the LoRaWAN version: +# 1.0: TS001-1.0 +# 1.0.1: TS001-1.0.1 +# 1.0.2: RP001-1.0.2 or RP001-1.0.2-RevB +# 1.0.3: RP001-1.0.3-RevA +# 1.0.4: RP002-1.0.0 or RP002-1.0.1 +# 1.1: RP001-1.1-RevA or RP001-1.1-RevB +regionalParametersVersion: RP001-1.0.3-RevA + +# Whether the end device supports join (OTAA) or not (ABP) +supportsJoin: true +# If your device is an ABP device (supportsJoin is false), uncomment the following fields: +# RX1 delay +#rx1Delay: 5 +# RX1 data rate offset +#rx1DataRateOffset: 0 +# RX2 data rate index +#rx2DataRateIndex: 0 +# RX2 frequency (MHz) +#rx2Frequency: 869.525 +# Factory preset frequencies (MHz) +#factoryPresetFrequencies: [868.1, 868.3, 868.5, 867.1, 867.3, 867.5, 867.7, 867.9] + +# Maximum EIRP +maxEIRP: 27 +# Whether the end device supports 32-bit frame counters +supports32bitFCnt: true + +# Whether the end device supports class B +supportsClassB: false +# If your device supports class B, uncomment the following fields: +# Maximum delay for the end device to answer a MAC request or confirmed downlink frame (seconds) +#classBTimeout: 60 +# Ping slot period (seconds) +#pingSlotPeriod: 128 +# Ping slot data rate index +#pingSlotDataRateIndex: 0 +# Ping slot frequency (MHz). Set to 0 if the band supports ping slot frequency hopping. +#pingSlotFrequency: 869.525 + +# Whether the end device supports class C +supportsClassC: false +# If your device supports class C, uncomment the following fields: +# Maximum delay for the end device to answer a MAC request or confirmed downlink frame (seconds) +#classCTimeout: 60 diff --git a/vendor/agriseen/ga5067-profile-923.yaml b/vendor/agriseen/ga5067-profile-923.yaml new file mode 100644 index 0000000000..e6bdd4ba95 --- /dev/null +++ b/vendor/agriseen/ga5067-profile-923.yaml @@ -0,0 +1,52 @@ +# Vendor profile ID, can be freely issued by the vendor +# This vendor profile ID is also used on the QR code for LoRaWAN devices, see +# https://lora-alliance.org/sites/default/files/2020-10/LoRa_Alliance_Vendor_ID_for_QR_Code.pdf +vendorProfileID: 0 + +# LoRaWAN MAC version: 1.0, 1.0.1, 1.0.2, 1.0.3, 1.0.4 or 1.1 +macVersion: 1.0.3 +# LoRaWAN Regional Parameters version. Values depend on the LoRaWAN version: +# 1.0: TS001-1.0 +# 1.0.1: TS001-1.0.1 +# 1.0.2: RP001-1.0.2 or RP001-1.0.2-RevB +# 1.0.3: RP001-1.0.3-RevA +# 1.0.4: RP002-1.0.0 or RP002-1.0.1 +# 1.1: RP001-1.1-RevA or RP001-1.1-RevB +regionalParametersVersion: RP001-1.0.3-RevA + +# Whether the end device supports join (OTAA) or not (ABP) +supportsJoin: true +# If your device is an ABP device (supportsJoin is false), uncomment the following fields: +# RX1 delay +#rx1Delay: 5 +# RX1 data rate offset +#rx1DataRateOffset: 0 +# RX2 data rate index +#rx2DataRateIndex: 0 +# RX2 frequency (MHz) +#rx2Frequency: 869.525 +# Factory preset frequencies (MHz) +#factoryPresetFrequencies: [868.1, 868.3, 868.5, 867.1, 867.3, 867.5, 867.7, 867.9] + +# Maximum EIRP +maxEIRP: 27 +# Whether the end device supports 32-bit frame counters +supports32bitFCnt: true + +# Whether the end device supports class B +supportsClassB: false +# If your device supports class B, uncomment the following fields: +# Maximum delay for the end device to answer a MAC request or confirmed downlink frame (seconds) +#classBTimeout: 60 +# Ping slot period (seconds) +#pingSlotPeriod: 128 +# Ping slot data rate index +#pingSlotDataRateIndex: 0 +# Ping slot frequency (MHz). Set to 0 if the band supports ping slot frequency hopping. +#pingSlotFrequency: 869.525 + +# Whether the end device supports class C +supportsClassC: false +# If your device supports class C, uncomment the following fields: +# Maximum delay for the end device to answer a MAC request or confirmed downlink frame (seconds) +#classCTimeout: 60 diff --git a/vendor/agriseen/ga5067.yaml b/vendor/agriseen/ga5067.yaml new file mode 100644 index 0000000000..a0a2cb06b5 --- /dev/null +++ b/vendor/agriseen/ga5067.yaml @@ -0,0 +1,164 @@ +name: ga5067 +description: GA5067 is a LoRa-based (LTE cat1, LTEM optional) GPS tracking device for cattle tracking with Li-SOCl2 battery. The Collar’s GPS location data will be uplinked to the LoRaWAN gateway according to the schedule you choose, The collar is programmed wirelessly by the network server. You can control how often GPS location data are collected, and can also remotely command program changes to the fixed-rate and mortality schedule, fixed duration time, and GPS location data transmission interval. + +# Hardware versions (optional, use when you have revisions) +hardwareVersions: + - version: '1.0' + numeric: 1 + - version: '1.0-rev-A' + numeric: 2 + +# Firmware versions (at least one is mandatory) +firmwareVersions: + - # Firmware version + version: '1.0' + numeric: 1 + # Corresponding hardware versions (optional) + hardwareVersions: + - '1.0' + + # Firmware features (optional) + # Valid values are: remote rejoin (trigger a join from the application layer), transmission interval (configure how + # often he device sends a message). + features: + - remote rejoin + - transmission interval + + # LoRaWAN Device Profiles per region + # Supported regions are EU863-870, US902-928, AU915-928, AS923, CN779-787, EU433, CN470-510, KR920-923, IN865-867, + # RU864-870 + profiles: + EU863-870: + # Optional identifier of the vendor of the profile. When you specify the vendorID, the profile is loaded from + # the vendorID's folder. This allows you to reuse profiles from module or LoRaWAN end device stack vendors. + # If vendorID is empty, the current vendor ID is used. In this example, the vendorID is the current vendor ID, + # which is verbose. + # vendorID: example + # Identifier of the profile (lowercase, alphanumeric with dashes, max 36 characters) + id: ga5067-profile-868 + # lorawanCertified: true + US902-928: + id: ga5067-profile-915 + # lorawanCertified: true + # codec: windsensor-codec + AS923: + id: ga5067-profile-923 + # lorawanCertified: true + # codec: windsensor-codec + +# Sensors that this device features (optional) +# Valid values are: +# 4-20 ma, accelerometer, altitude, analog input, auxiliary, barometer, battery, button, bvoc, co, co2, conductivity, +# current, digital input, dissolved oxygen, distance, dust, energy, gps, gyroscope, h2s, humidity, iaq, level, light, +# lightning, link, magnetometer, moisture, motion, no, no2, o3, particulate matter, ph, pir, pm2.5, pm10, potentiometer, +# power, precipitation, pressure, proximity, pulse count, pulse frequency, radar, rainfall, rssi, smart valve, snr, so2, +# solar radiation, sound, strain, surface temperature, temperature, tilt, time, tvoc, uv, vapor pressure, velocity, +# vibration, voltage, water potential, water, weight, wifi ssid, wind direction, wind speed. +sensors: + - accelerometer + - gps + - temperature + - humidity + # - ble + +# Additional radios that this device has (optional) +# Valid values are: ble, nfc, wifi, cellular. +additionalRadios: + - ble + # - ltem + # - lte cat1 + +# Bridge interfaces (optional) +# Valid values are: modbus, m-bus, can bus, rs-485, sdi-12, analog. +# bridgeInterfaces: +# - m-bus +# - rs-485 + +# Dimensions in mm (optional) +# Use width, height, length and/or diameter +dimensions: + width: 48.2 + length: 110.5 + height: 54.5 + +# Weight in grams (optional) +weight: 290 + +# Battery information (optional) +battery: + replaceable: true + type: 19000mah Li SOCl2 battery + +# Operating conditions (optional) +operatingConditions: + # Temperature (Celsius) + temperature: + min: -40 + max: 75 + # Relative humidity (fraction of 1) + relativeHumidity: + min: 0.1 + max: 0.9 + +# IP rating (optional) +ipCode: IP67 + +# Key provisioning (optional) +# Valid values are: custom (user can configure keys), join server and manifest. +# keyProvisioning: +# - custom +# - join server + +# Key programming (optional) +# Valid values are: bluetooth, nfc, wifi, serial (when the user has a serial interface to set the keys) +# and firmware (when the user should change the firmware to set the keys). +# keyProgramming: +# - serial +# - firmware + +# Key security (optional) +# Valid values are: none, read protected and secure element. +# keySecurity: none + +# Firmware programming (optional) +# Valid values are: serial (when the user has a serial interface to update the firmware), fuota lorawan (when the device +# supports LoRaWAN FUOTA via standard interfaces) and fuota other (other wireless update mechanism). +# firmwareProgramming: +# - serial +# - fuota lorawan + +# Product and data sheet URLs (optional) +productURL: https://www.lpwanspace.com/collections/end-devices-smart-farming/products/iot-based-livestock-gps-collar + +# Commercial information +resellerURLs: + - name: 'Reseller 1' + region: + - China + url: https://www.lpwanspace.com/collections/end-devices-smart-farming/products/iot-based-livestock-gps-collar +# msrp: +# EUR: 90 +# USD: 120 + +# Photos +photos: + main: sheep.jpg +# Youtube or Vimeo Video (optional) +# videos: +# main: https://www.youtube.com/watch?v=JHzxcD2oEn8 + +# Regulatory compliances (optional) +# compliances: +# safety: +# - body: IEC +# norm: EN +# standard: 62368-1 +# radioEquipment: +# - body: ETSI +# norm: EN +# standard: 301 489-1 +# version: 2.2.0 +# - body: ETSI +# norm: EN +# standard: 301 489-3 +# version: 2.1.0 diff --git a/vendor/agriseen/index.yaml b/vendor/agriseen/index.yaml new file mode 100644 index 0000000000..7f19a9257f --- /dev/null +++ b/vendor/agriseen/index.yaml @@ -0,0 +1,3 @@ +endDevices: + # Unique identifier of the end device + - ga5067 diff --git a/vendor/agriseen/sheep.jpg b/vendor/agriseen/sheep.jpg new file mode 100644 index 0000000000..0e17d225bc Binary files /dev/null and b/vendor/agriseen/sheep.jpg differ diff --git a/vendor/index.yaml b/vendor/index.yaml index 84118c6a11..11501f39f5 100644 --- a/vendor/index.yaml +++ b/vendor/index.yaml @@ -1969,6 +1969,11 @@ vendors: website: https://www.dnt.de/ logo: dnt-logo.svg + - id: agriseen + name: Agriseen + website: http://www.agriseen.com/ + logo: agriseen_logo.png + - id: koidra name: Koidra Inc. description: Koidra is an intelligent automation company, dedicated to modernizing the automation of manufacturing facilities, with the high-tech greenhouse industry being the core market. Our tiered products deliver a comprehensive solution that enhances industrial efficiency.