add new nexelec devices

vendor/nexelec/feel-codec.yaml

@@ -0,0 +1,10 @@
+# Uplink decoder decodes binary data uplink into a JSON object (optional)
+# For documentation on writing encoders and decoders, see: https://thethingsstack.io/integrations/payload-formatters/javascript/
+uplinkDecoder:
+  fileName: sign-codec.js
+
+downlinkEncoder:
+  fileName: sign-codec.js
+
+downlinkDecoder:
+  fileName: sign-codec.js

vendor/nexelec/feel-profile.yaml

@@ -0,0 +1,52 @@
+# Vendor profile ID, can be freely issued by the vendor
+# This vendor profile ID is also used on the QR code for LoRaWAN devices, see
+# https://lora-alliance.org/sites/default/files/2020-10/LoRa_Alliance_Vendor_ID_for_QR_Code.pdf
+vendorProfileID: 0686
+
+# LoRaWAN MAC version: 1.0, 1.0.1, 1.0.2, 1.0.3, 1.0.4 or 1.1
+macVersion: 1.0.2
+# LoRaWAN Regional Parameters version. Values depend on the LoRaWAN version:
+#   1.0:   TS001-1.0
+#   1.0.1: TS001-1.0.1
+#   1.0.2: RP001-1.0.2 or RP001-1.0.2-RevB
+#   1.0.3: RP001-1.0.3-RevA
+#   1.0.4: RP002-1.0.0 or RP002-1.0.1
+#   1.1:   RP001-1.1-RevA or RP001-1.1-RevB
+regionalParametersVersion: RP001-1.0.2-RevB
+
+# Whether the end device supports join (OTAA) or not (ABP)
+supportsJoin: true
+# If your device is an ABP device (supportsJoin is false), uncomment the following fields:
+# RX1 delay
+#rx1Delay: 5
+# RX1 data rate offset
+#rx1DataRateOffset: 0
+# RX2 data rate index
+#rx2DataRateIndex: 0
+# RX2 frequency (MHz)
+#rx2Frequency: 869.525
+# Factory preset frequencies (MHz)
+#factoryPresetFrequencies: [868.1, 868.3, 868.5, 867.1, 867.3, 867.5, 867.7, 867.9]
+
+# Maximum EIRP
+maxEIRP: 14
+# Whether the end device supports 32-bit frame counters
+supports32bitFCnt: true
+
+# Whether the end device supports class B
+supportsClassB: false
+# If your device supports class B, uncomment the following fields:
+# Maximum delay for the end device to answer a MAC request or confirmed downlink frame (seconds)
+#classBTimeout: 60
+# Ping slot period (seconds)
+#pingSlotPeriod: 128
+# Ping slot data rate index
+#pingSlotDataRateIndex: 0
+# Ping slot frequency (MHz). Set to 0 if the band supports ping slot frequency hopping.
+#pingSlotFrequency: 869.525
+
+# Whether the end device supports class C
+supportsClassC: false
+# If your device supports class C, uncomment the following fields:
+# Maximum delay for the end device to answer a MAC request or confirmed downlink frame (seconds)
+#classCTimeout: 60

vendor/nexelec/feel.yaml

@@ -0,0 +1,131 @@
+name: FEEL
+description: FEEL is a 2-in-1 LoRaWAN-connected, battery- or USB-powered room sensor that can be rapidly configurable via NFC. Depending on the model, the sensor can measure temperature and humidity.
+
+# Hardware versions (optional, use when you have revisions)
+hardwareVersions:
+  - version: 'V001'
+    numeric: 1
+
+# Firmware versions (at least one is mandatory)
+firmwareVersions:
+  - # Firmware version
+    version: 'V01.0'
+    numeric: 1
+    # Corresponding hardware versions (optional)
+    hardwareVersions:
+      - 'V001'
+
+    # Firmware features (optional)
+    # Valid values are: remote rejoin (trigger a join from the application layer), transmission interval (configure how
+    # often he device sends a message).
+    features:
+      - remote rejoin
+      - transmission interval
+
+    # LoRaWAN Device Profiles per region
+    # Supported regions are EU863-870, US902-928, AU915-928, AS923, CN779-787, EU433, CN470-510, KR920-923, IN865-867,
+    # RU864-870
+    profiles:
+      EU863-870:
+        # Optional identifier of the vendor of the profile. When you specify the vendorID, the profile is loaded from
+        # the vendorID's folder. This allows you to reuse profiles from module or LoRaWAN end device stack vendors.
+        # If vendorID is empty, the current vendor ID is used. In this example, the vendorID is the current vendor ID,
+        # which is verbose.
+        #vendorID: example
+        # Identifier of the profile (lowercase, alphanumeric with dashes, max 36 characters)
+        id: feel-profile
+        lorawanCertified: false
+        codec: sign-codec
+
+# Sensors that this device features (optional)
+# Valid values are:
+# 4-20 ma, accelerometer, altitude, analog input, auxiliary, barometer, battery, button, bvoc, co, co2, conductivity,
+# current, digital input, dissolved oxygen, distance, dust, energy, gps, gyroscope, h2s, humidity, iaq, level, light,
+# lightning, link, magnetometer, moisture, motion, no, no2, o3, particulate matter, ph, pir, pm2.5, pm10, potentiometer,
+# power, precipitation, pressure, proximity, pulse count, pulse frequency, radar, rainfall, rssi, smart valve, snr, so2,
+# solar radiation, sound, strain, surface temperature, temperature, tilt, time, tvoc, uv, vapor pressure, velocity,
+# vibration, voltage, water potential, water, weight, wifi ssid, wind direction, wind speed.
+sensors:
+  - temperature
+  - humidity
+
+# Additional radios that this device has (optional)
+# Valid values are: ble, nfc, wifi, cellular.
+additionalRadios:
+  - nfc
+
+# Dimensions in mm (optional)
+# Use width, height, length and/or diameter
+dimensions:
+  width: 87
+  length: 87
+  height: 23
+
+# Weight in grams (optional)
+weight: 110
+
+# Battery information (optional)
+battery:
+  replaceable: true
+  type: AA
+
+# Operating conditions (optional)
+operatingConditions:
+  # Temperature (Celsius)
+  temperature:
+    min: -30
+    max: 70
+  # Relative humidity (fraction of 1)
+  relativeHumidity:
+    min: 0
+    max: 1
+
+# IP rating (optional)
+ipCode: IP30
+
+# Key security (optional)
+# Valid values are: none, read protected and secure element.
+keySecurity: read protected
+
+# Product and data sheet URLs (optional)
+productURL: https://www.nexelec.fr/
+dataSheetURL: https://support.nexelec.fr/en/support/solutions/articles/80001085095-datasheet/
+
+# Commercial information
+resellerURLs:
+  - name: 'Nexelec'
+    region:
+      - European Union
+    url: https://www.nexelec.fr/
+
+msrp:
+  EUR: 59
+  USD: 65
+
+# Photos
+photos:
+  main: sign.png
+
+# Regulatory compliances (optional)
+compliances:
+  safety:
+    - body: IEC
+      norm: EN
+      standard: 62368-1
+    - body: ETSI
+      norm: EN
+      standard: 62479:2010
+
+  radioEquipment:
+    - body: ETSI
+      norm: EN
+      standard: 301 489-1
+      version: 2.2.0
+    - body: ETSI
+      norm: EN
+      standard: 301 489-3
+      version: 2.1.0
+    - body: ETSI
+      norm: EN
+      standard: 300 220-2
+      version: 3.2.1

vendor/nexelec/index.yaml

@@ -3,3 +3,7 @@
 endDevices:
   # Unique identifier of the end device (lowercase, alphanumeric with dashes, max 36 characters)
   - carbon # look in windsensor.yaml for the end device definition
+  - sign
+  - move
+  - rise
+  - feel

vendor/nexelec/move-codec.yaml

@@ -0,0 +1,10 @@
+# Uplink decoder decodes binary data uplink into a JSON object (optional)
+# For documentation on writing encoders and decoders, see: https://thethingsstack.io/integrations/payload-formatters/javascript/
+uplinkDecoder:
+  fileName: sign-codec.js
+
+downlinkEncoder:
+  fileName: sign-codec.js
+
+downlinkDecoder:
+  fileName: sign-codec.js

vendor/nexelec/move-profile.yaml

@@ -0,0 +1,52 @@
+# Vendor profile ID, can be freely issued by the vendor
+# This vendor profile ID is also used on the QR code for LoRaWAN devices, see
+# https://lora-alliance.org/sites/default/files/2020-10/LoRa_Alliance_Vendor_ID_for_QR_Code.pdf
+vendorProfileID: 0686
+
+# LoRaWAN MAC version: 1.0, 1.0.1, 1.0.2, 1.0.3, 1.0.4 or 1.1
+macVersion: 1.0.2
+# LoRaWAN Regional Parameters version. Values depend on the LoRaWAN version:
+#   1.0:   TS001-1.0
+#   1.0.1: TS001-1.0.1
+#   1.0.2: RP001-1.0.2 or RP001-1.0.2-RevB
+#   1.0.3: RP001-1.0.3-RevA
+#   1.0.4: RP002-1.0.0 or RP002-1.0.1
+#   1.1:   RP001-1.1-RevA or RP001-1.1-RevB
+regionalParametersVersion: RP001-1.0.2-RevB
+
+# Whether the end device supports join (OTAA) or not (ABP)
+supportsJoin: true
+# If your device is an ABP device (supportsJoin is false), uncomment the following fields:
+# RX1 delay
+#rx1Delay: 5
+# RX1 data rate offset
+#rx1DataRateOffset: 0
+# RX2 data rate index
+#rx2DataRateIndex: 0
+# RX2 frequency (MHz)
+#rx2Frequency: 869.525
+# Factory preset frequencies (MHz)
+#factoryPresetFrequencies: [868.1, 868.3, 868.5, 867.1, 867.3, 867.5, 867.7, 867.9]
+
+# Maximum EIRP
+maxEIRP: 14
+# Whether the end device supports 32-bit frame counters
+supports32bitFCnt: true
+
+# Whether the end device supports class B
+supportsClassB: false
+# If your device supports class B, uncomment the following fields:
+# Maximum delay for the end device to answer a MAC request or confirmed downlink frame (seconds)
+#classBTimeout: 60
+# Ping slot period (seconds)
+#pingSlotPeriod: 128
+# Ping slot data rate index
+#pingSlotDataRateIndex: 0
+# Ping slot frequency (MHz). Set to 0 if the band supports ping slot frequency hopping.
+#pingSlotFrequency: 869.525
+
+# Whether the end device supports class C
+supportsClassC: false
+# If your device supports class C, uncomment the following fields:
+# Maximum delay for the end device to answer a MAC request or confirmed downlink frame (seconds)
+#classCTimeout: 60