From 14190b792fd8488401e7622242219e591d5470aa Mon Sep 17 00:00:00 2001 From: Lars Dannijs <117638911+LDannijs@users.noreply.github.com> Date: Thu, 2 May 2024 16:25:44 +0200 Subject: [PATCH] Add a setup script (#693) * change fludia and mclimate * Revert to 88c23cc27224d18463411d591a0dbee417a8302a * mac empty & codec change * Revert "mac empty & codec change" This reverts commit aeaf8254f86080b1d59a14495b18dd67fb868d11. * mac empty & codec change * fix quotation, index check, vendorprofileid check * add check for company id * update vendorProfileID explanation * QoL changes * update to bash and add profile selection * optimize code and add device name check * update variable * add script to make & fix index adding --- Makefile | 2 + README.md | 9 ++ bin/setup.sh | 421 +++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 432 insertions(+) create mode 100755 bin/setup.sh diff --git a/Makefile b/Makefile index e53632e55c..788dff992a 100644 --- a/Makefile +++ b/Makefile @@ -47,5 +47,7 @@ fmt: devices.csv: $(NODE) bin/csv.js +setup: + bin/setup.sh # vim: ft=make diff --git a/README.md b/README.md index 08a8ebfa05..5e4c668776 100644 --- a/README.md +++ b/README.md @@ -95,6 +95,15 @@ To use the YAML plugin correctly, you need to assign the schema to the plugin. T } ``` +## Setup script + +To help you get started with adding vendors and devices to the repo we made a script that creates all the necessary files with some basic information. To run the script, open a terminal (preferably inside a code editor like VSCode) and enter: + +```bash +$ make setup +``` +After that just follow the instructions given to you by the script. + ## Files and Directories There are six file types in the Device Repository: diff --git a/bin/setup.sh b/bin/setup.sh new file mode 100755 index 0000000000..b0a4f6f8fb --- /dev/null +++ b/bin/setup.sh @@ -0,0 +1,421 @@ +#!/bin/bash + +if [ -n "$NO_COLOR" ]; then + # The variable is set, so disable color output + RED='' + GREEN='' + BLUE='' + YELLOW='' + NC='' +else + # The variable is not set, so enable color output + RED='\033[0;31m' + GREEN='\033[0;32m' + BLUE='\033[0;94m' + YELLOW='\033[0;33m' + NC='\033[0m' +fi + +add_devices () { + +while true; do + echo -e "\n${BLUE}How many devices do you want to add? (number between 0 and 10)${NC}" + read device_count + if [[ $device_count =~ ^[0-9]+$ ]] && [[ "$device_count" -ge 0 && + "$device_count" -le 10 ]]; then + break + else + echo -e "${RED}Invalid input. Please enter a number between 0 and 10.\n${NC}" + fi +done + +# Check if index exists +while true; do + if [ -e "index.yaml" ]; then + break + else + echo "endDevices: + # Unique identifier of the end device (lowercase, alphanumeric with dashes, max 36 characters)" > index.yaml + fi +done + +# Loop to get device info and create files +for ((i=1;i<=device_count;i++)); +do + while true; do + echo -e "\n${BLUE}What is the name of device $i? +(lowercase, alphanumeric with dashes, max 36 characters) (${RED}required${BLUE}):${NC}" + read devicename + if [[ $devicename =~ ^[a-z0-9\-]{3,36}$ ]]; then + if grep -q -E "\b$devicename\b" index.yaml; then + echo -e "${RED}This device name already exists. Please enter a unique name.\n${NC}" + else + break + fi + else + echo -e "${RED}Invalid input. Please enter a lowercase alphanumeric string +with dashes and between 3 and 36 characters.\n${NC}" + fi + done + + awk "/endDevices:/{print;print \" - $devicename\";next}1" index.yaml > temp_index.yaml && mv temp_index.yaml index.yaml + + while true; do + echo -e "${BLUE}What is the description of device $i? (${RED}required${BLUE}):${NC}" + read devicedescription + if [[ $devicedescription =~ .+ ]]; then + break + else + echo -e "${RED}Invalid input. Please enter at least one character.\n${NC}" + fi + done + + echo "name: $devicename +description: $devicedescription + +# Hardware versions (optional) +hardwareVersions: + - version: '1.0' + numeric: 1 + +# Firmware versions (at least one is mandatory) +firmwareVersions: + - # Firmware version + version: '1.0' + numeric: 1 + # Supported hardware versions (optional) + hardwareVersions: + - '1.0' # Must refer to hardwareVersions declared above + # LoRaWAN Device Profiles per region + # Supported regions: EU863-870, US902-928, AU915-928, AS923, CN779-787, EU433, CN470-510, KR920-923, IN865-867, RU864-870 + profiles:" > $devicename.yaml + +while true; do + echo -e "${BLUE}How many profiles do you want to add for device $i?${NC}" + read profile_count + if [[ ! $profile_count =~ ^[0-9]+$ ]]; then + echo -e "${RED}Invalid input. Please enter a number.\n${NC}" + else + break + fi +done + +profile_names=("EU863-870" "US902-928" "AU915-928" "AS923" "CN779-787" "EU433" "CN470-510" "KR920-923" "IN865-867" "RU864-870") +profile_base_freqs=("eu868" "us915" "au915" "as923" "cn779" "eu433" "cn470" "kr920" "in865" "ru864") +selected_indexes=() # Track selected profile indexes to avoid duplicates + +for ((j=1; j<=profile_count; j++)); do + echo -e "${BLUE}\nAvailable profiles:${NC}" + for k in "${!profile_names[@]}"; do + if [[ ! " ${selected_indexes[@]} " =~ " ${k} " ]]; then + echo "$((k+1))) ${profile_names[$k]}" + fi + done + + echo -e "${BLUE}Which profile do you want to add for profile $j? (Enter the number)${NC}" + read profile_selection + profile_index=$((profile_selection-1)) + + if [[ " ${selected_indexes[@]} " =~ " ${profile_index} " ]]; then + echo -e "${RED}This profile has already been selected. Please choose a different profile.${NC}" + ((j--)) # Decrement to ask for profile again + elif [[ $profile_index -ge 0 && $profile_index -lt ${#profile_names[@]} ]]; then + selected_indexes+=("$profile_index") # Add index to selected + else + echo -e "${RED}Invalid selection. Please select a valid profile number.\n${NC}" + ((j--)) # Decrement to ask for profile again + fi +done + +# When all profiles are selected, iterate over all of them to add profile. +for index in "${selected_indexes[@]}"; do + profile="${profile_names[$index]}" + base_freq="${profile_base_freqs[$index]}" + echo " $profile: + id: $devicename-profile-$base_freq + lorawanCertified: + codec: $devicename-codec" >> $devicename.yaml + echo "# LoRaWAN MAC version: 1.0, 1.0.1, 1.0.2, 1.0.3, 1.0.4 or 1.1 +macVersion: '' +# LoRaWAN Regional Parameters version. Values depend on the LoRaWAN version: +# 1.0: TS001-1.0 +# 1.0.1: TS001-1.0.1 +# 1.0.2: RP001-1.0.2 or RP001-1.0.2-RevB +# 1.0.3: RP001-1.0.3-RevA +# 1.0.4: RP002-1.0.0, RP002-1.0.1, RP002-1.0.2, RP002-1.0.3 or RP002-1.0.4 +# 1.1: RP001-1.1-RevA or RP001-1.1-RevB +regionalParametersVersion: '' + +# Whether the end device supports join (OTAA) or not (ABP) +supportsJoin: true +# If your device is an ABP device (supportsJoin is false), uncomment the following fields: +# RX1 delay +#rx1Delay: 5 +# RX1 data rate offset +#rx1DataRateOffset: 0 +# RX2 data rate index +#rx2DataRateIndex: 0 +# RX2 frequency (MHz) +#rx2Frequency: 869.525 +# Factory preset frequencies (MHz) +#factoryPresetFrequencies: [868.1, 868.3, 868.5, 867.1, 867.3, 867.5, 867.7, 867.9] + +# Maximum EIRP +maxEIRP: +# Whether the end device supports 32-bit frame counters +supports32bitFCnt: + +# Whether the end device supports class B +supportsClassB: +# If your device supports class B, uncomment the following fields: +# Maximum delay for the end device to answer a MAC request or confirmed downlink frame (seconds) +#classBTimeout: 60 +# Ping slot period (seconds) +#pingSlotPeriod: 128 +# Ping slot data rate index +#pingSlotDataRateIndex: 0 +# Ping slot frequency (MHz). Set to 0 if the band supports ping slot frequency hopping. +#pingSlotFrequency: 869.525 + +# Whether the end device supports class C +supportsClassC: +# If your device supports class C, uncomment the following fields: +# Maximum delay for the end device to answer a MAC request or confirmed downlink frame (seconds) +#classCTimeout: 60" > $devicename-profile-$base_freq.yaml +done + +echo "# Sensors that this device features (optional) +# Valid values are: +# 4-20 ma, accelerometer, altitude, analog input, auxiliary, barometer, battery, button, bvoc, co, co2, conductivity, +# current, digital input, dissolved oxygen, distance, dust, energy, gps, gyroscope, h2s, humidity, iaq, level, light, +# lightning, link, magnetometer, moisture, motion, no, no2, o3, particulate matter, ph, pir, pm2.5, pm10, potentiometer, +# power, precipitation, pressure, proximity, pulse count, pulse frequency, radar, rainfall, rssi, smart valve, snr, so2, +# solar radiation, sound, strain, surface temperature, temperature, tilt, time, tvoc, uv, vapor pressure, velocity, +# vibration, voltage, water potential, water, weight, wifi ssid, wind direction, wind speed. +sensors: + - + +# Additional radios that this device has (optional) +# Valid values are: ble, nfc, wifi, cellular. +additionalRadios: + - + +# Bridge interfaces (optional) +# Valid values are: modbus, m-bus, can bus, rs-485, sdi-12, analog. +bridgeInterfaces: + - + +# Dimensions in mm (optional) +# Use width, height, length and/or diameter +dimensions: + width: + length: + height: + +# Weight in grams (optional) +weight: + +# Battery information (optional) +battery: + replaceable: + type: + +# Operating conditions (optional) +operatingConditions: + # Temperature (Celsius) + temperature: + min: + max: + # Relative humidity (fraction of 1) + relativeHumidity: + min: + max: + +# IP rating (optional) +ipCode: + +# Key provisioning (optional) +# Valid values are: custom (user can configure keys), join server and manifest. +keyProvisioning: + - + +# Key programming (optional) +# Valid values are: bluetooth, nfc, wifi, serial (when the user has a serial interface to set the keys) +# and firmware (when the user should change the firmware to set the keys). +keyProgramming: + - + +# Key security (optional) +# Valid values are: none, read protected and secure element. +keySecurity: + +# Firmware programming (optional) +# Valid values are: serial (when the user has a serial interface to update the firmware), fuota lorawan (when the device +# supports LoRaWAN FUOTA via standard interfaces) and fuota other (other wireless update mechanism). +firmwareProgramming: + - + +# Product and data sheet URLs (optional) +productURL: +dataSheetURL: + +# Photos (MAKE SURE THE IMAGE HAS A TRANSPARENT BACKGROUND) +photos: + main: + +# Youtube or Vimeo Video (optional) +videos: + main: + +# Regulatory compliances (optional) +compliances: + safety: + - body: + norm: + standard: + radioEquipment: + - body: + norm: + standard: + version: + - body: + norm: + standard: + version: ">> $devicename.yaml + +echo "# Uplink decoder decodes binary data uplink into a JSON object (optional) +# For documentation on writing encoders and decoders, see: https://thethingsstack.io/integrations/payload-formatters/javascript/ +uplinkDecoder: + fileName: $devicename.js" > $devicename-codec.yaml + +echo " // Please read here on how to implement the proper codec: https://www.thethingsindustries.com/docs/integrations/payload-formatters/javascript/" > $devicename.js +done + +echo -e "\n${GREEN}All the necessary files have now been created containing templates, +so you can start adding missing information and extras. +Please do go through the files and check if everything is correct. +This tool is only for helping you add the boilerplate files quicker. +Some details are still blank, like the codec still requires code to be added or +extras like images for example. +The more you add, the more is known about your device. +For more information look on the github page: +https://github.com/TheThingsNetwork/lorawan-devices#files-and-directories \n${NC}" + +exit 0 +} + +add_company () { +while true; do + echo -e "\n${BLUE}What is the unique id of your company? (a.k.a. the name of the vendor folder) +(${YELLOW}lowercase, alphanumeric with dashes, max 36 characters${BLUE}) (${RED}required${BLUE}):${NC}" + read companyid + + if [[ $companyid =~ ^[a-z0-9\-]{1,36}$ ]]; then + # Check if the company ID already exists in index.yaml + if grep -q "id: $companyid" index.yaml; then + echo -e "${RED}This company ID is already in use. Please enter a different one.\n${NC}" + else + break + fi + else + echo -e "${RED}Invalid input. Please enter a lowercase alphanumeric string +with dashes and a maximum of 36 characters.\n${NC}" + fi +done + +while true; do + echo -e "${BLUE}What is the name of your company? (${RED}required${BLUE}):${NC}" + read companyname + if [[ -z "$companyname" ]]; then + echo -e "${RED}Invalid input. Please enter at least 1 character.\n${NC}" + else + break + fi +done + +echo -e "\n - id: $companyid + name: $companyname">> index.yaml + +while true; do + echo -e "${BLUE}What is the LoRa Alliance issued Vendor ID? (${YELLOW}optional${BLUE}):${NC}" + read vendorid + if [ -z "$vendorid" ]; then + break + fi + if [[ $vendorid =~ ^[0-9]+$ ]] && [[ $vendorid -ge 0 && + $vendorid -le 1000 ]]; then + if grep -q -w "vendorID: $vendorid" ./index.yaml; then + echo -e "${RED}This Vendor ID is already in use.\n${NC}" + else + echo -e " vendorID: $vendorid">> index.yaml + break + fi + else + echo -e "${RED}Invalid input. Please enter a number between 0 and 1000.\n${NC}" + fi +done + +while true; do + echo -e "${BLUE}What is the address of the company's website? (${YELLOW}optional${BLUE}):${NC}" + read website + if [[ -z "$website" ]]; then + break + else + printf " website: $website">> index.yaml + break + fi +done + +mkdir "$companyid" + +cd "$companyid" + +sleep 1 + +add_devices +} + +echo -e "${BLUE}Hello! The Device Repository is where we store the characteristics +and capabilities of LoRaWAN devices. To add a new vendor or devices, some files +need to be created with specific information. +To help you along, we've created this setup tool that will create a few of the +necessary template files and apply the basic information needed. +Please fill in the upcoming questions.\n${NC}" + +cd vendor + +echo -e "${BLUE}What would you like to do?${NC}" + +PS3="Type a number: " + +options=("Add new devices to an existing entry" "Add a new company") + +select opt in "${options[@]}"; do + case $opt in + "Add new devices to an existing entry") + while true; do + echo -e "\n${BLUE}What is the unique id of your company? (a.k.a. the name of the vendor folder) +(${YELLOW}lowercase, alphanumeric with dashes, max 36 characters${BLUE}) (${RED}required${BLUE}):${NC}" + read companyid + if [[ $companyid =~ ^[a-z0-9\-]{1,36}$ ]]; then + if [ -d "$companyid" ]; then + cd "$companyid" + add_devices + break + else + echo -e "${RED}id not found. Make sure that you entered it +correctly or go back and add a new company.${NC}\n" + fi + else + echo -e "${RED}Invalid input. Please enter a lowercase +alphanumeric string with dashes and a maximum of 36 characters.\n${NC}" + fi + done + ;; + "Add a new company") + add_company + break + ;; + *) echo "Invalid option";; + esac +done \ No newline at end of file