Skip to content

Latest commit

 

History

History
374 lines (271 loc) · 11.9 KB

CHANGELOG.md

File metadata and controls

374 lines (271 loc) · 11.9 KB
Raw

Changelog

All notable changes to this project will be documented in this file.

The format is based on Keep a Changelog, and this project adheres to Semantic Versioning.

v1.5.0 - 2024-11-08

Added

  • Add h3 feature flag to reduce the size of complied library
  • Add tquic_time_cwnd.py for analyzing TQUIC debug logs and produce a time-cwnd figure

Fixed

  • Fix the typos detected by the latest typo-cli

v1.4.0 - 2024-10-28

Added

  • Add qlog feature flag to reduce the size of complied library
  • Optimize pacing for acknowledgement packets
  • Minor tweaks for tquic_time_offset.py

Fixed

  • Fix checking packet header under disable_1rtt_encryption mode
  • Fix the length of trancated packet number
  • Some fixes for tquic_tools_test.sh

v1.3.1 - 2024-10-11

Added

  • Use ohrs to build tquic for HarmaryOS
  • Support building for HarmonyOS on arm/x86_64 architecture

v1.3.0 - 2024-10-10

Added

  • Support building for HarmonyOS on aarch64 architecture
  • Support disable_1rtt_encryption transport parameter
  • Support sending 1-RTT packets on the server before handshake completion
  • Resolve new issues found by cargo clippy

v1.2.0 - 2024-09-26

Added

  • Improve acknowledgement strategy
  • Optimize pacing for small packets
  • Add quic_tls_config_set_session_timeout() and change default session timeout
  • Add config API for copa algorithm
  • Add FFI set_anti_amplification_factor
  • Add a tool for analyzing TQUIC debug logs and produce a time-offset figure

v1.1.0 - 2024-08-20

Added

  • Buffer undecryptable Handshake and OneRtt packets during the handshake phase
  • Update some comments about stream

Fixed

  • Fix the closure of the stream that was reset by the peer
  • Fix the suboptimal performance in multipath transmission caused by pacing

v1.0.0 - 2024-08-01

Added

  • Support building on Windows
  • Optimize the initial RTT of the newly validated path
  • Add API for deferring idle timeout

Changed

  • Rename PathStats to quic_path_stats_t in FFI
  • Change prototype of quic_set_logger in FFI

v0.15.0 - 2024-07-18

Added

  • Support building for the aarch64-apple-ios-sim target
  • Support customized connection id generators
  • Add quic_packet_header_info() to extract cid-related info from quic packets
  • Add quic_conn_path_stats to get path level stats
  • Add configuration for pacing granularity
  • Tweak packet number encoding

Fixed

  • Replace the hashlru crate with the lru crate

v0.14.0 - 2024-07-11

Added

  • Update config API for congestion control
  • Update cbindgen.toml and the generated header file
  • Tweak comments for application protos in FFI

Changed

  • Rename enum members of quic_multipath_algorithm in tquic.h

Fixed

  • Fix stream operations that should mark conn as tickable
  • Fix the issue with sending MAX_DATA frames
  • Fix the issue with pacer timer that occasionally leads to a connection timeout error

v0.13.0 - 2024-06-25

Added

  • Add pacing to smooth the flow of packets sent onto the network
  • Add more C APIs for the quic connection
  • Tweak maximum MTU for paths using IPv4-mapped IPv6 addresses

Removed

  • Remove useless sfv flag in ffi

Fixed

  • Update stream_bidi_new/stream_uni_new to work like stream_new

v0.12.0 - 2024-05-27

Added

  • Buffer disordered zero rtt packets on the server endpoint
  • Add dummy congestion controller for testing and expriments
  • Tweak configurations and initialization of flow control
  • Improve comments of bbr congestion control algorithm
  • Add workflow and plot tools for benchmarking
  • tquic_tools: add the version option

Fixed

  • Fix dropping datagrams from unknown connections on the client endpoint
  • Fix handling restart from idle for bbr/bbr3 algorithms
  • tquic_tools: resolve minor issues

v0.11.0 - 2024-05-08

Added

  • tquic_tools: group different options by category and prioritize commonly used options
  • Add the header file of BoringSSL library in tquic.h
  • Resolve new issues found by cargo clippy
  • Add integration testing for multipath
  • Update run_endpoint.sh to enable keyupdate/chacha20 testcase for server

Changed

  • tquic_tools: rename max_requests_per_thread to total_requests_per_thread

Fixed

  • Fix RangeSet::filter() used by Redundant multipath scheduler
  • Fix injected stream frames for Redundant multipath scheduler

v0.10.0 - 2024-04-26

Added

  • Add support for responding to key updates
  • Add datagram packetization layer PMTU discovery
  • Improve API for stream creation
  • Limit configuration value of type varint
  • Add pacing_rate to PathStats
  • tquic_server: output stats when server connection is closed
  • Add workflow and plot tools for fct testing

Fixed

  • Fix the issue where bbr3 cannot exit slow start due to high packet loss rate

Security

  • Limit memory consumption for tracking closed stream ids

v0.9.0 - 2024-04-10

Added

  • Improve FFI for quic_tls_config_t
  • Update the handling of probe timeout to conform with RFC 9002
  • Update limit of the output buffer for Connection::send()
  • Add plot tools for goodput and interop testing

Changed

  • Change quic_config_set_tls_config() in FFI
  • Change quic_tls_config_select_methods_t in FFI

Fixed

  • Fix NewToken frame in qlog
  • Fix the unit test case conn_write_qlog that fails with low probability

Security

  • limit the number of queued RETIRE_CONNECTION_ID frames

v0.8.1 - 2024-03-18

Removed

  • Remove the sfv feature flag from h3 (to resolve a build issue at docs.rs)

v0.8.0 - 2024-03-15

Added

  • Support anti-amplification limit for server
  • Support customized config when initiating a connection
  • Add callback based FFI for writing the keylog and qlog
  • Support compiling dynamic library for C language
  • Update the processing of LossDetection timeout in multipath mode
  • Update crate docs about PathStats/TlsConfig/TlsConfigSelector

Security

  • Discard old Path Challenges received if needed

v0.7.0 - 2024-02-02

Added

  • Add support for building on FreeBSD
  • Add more path level metrics
  • Add more quic and recovery events in qlog
  • Add tquic_qvis.sh to convert qlog files to be compatible with qvis
  • Update MultipathScheduler interface for some advanced schedulers
  • Add tquic_tools_test.sh for additional end-to-end testing
  • tquic_client: support early data
  • tquic_tools: use millisecond precision for log timestamp
  • tquic_tools: add log-file option to write logs to specified file
  • tquic_tools: add active-cid-limit option to allow more paths

Changed

  • tquic_tools: change the qlog-log option to the qlog-dir option
  • tquic_tools: change the dump-path option to the dump-dir option
  • tquic_tools: update default pto linear factor
  • tquic_client: change the local_addresses option to allow the os to choose available ports
  • tquic_client: use local_addresses option to specify the addresses to bind in both singlepath and multipath mode.

Fixed

  • Fix record separator of qlog in json-seq format

v0.6.0 - 2024-01-17

Added

  • Support the latest version of qlog (v0.4)
  • Add cid_len option to tquic tools
  • Ignore undecrypted packets with invalid format

Changed

  • Move website dir to tquic-group/tquic-website repo

Fixed

  • Fix the selected MTU for the sending path
  • Fix anti-deadlock PTO during handshake
  • Fix the assertion of negotiated parameters in TLS unit tests

v0.5.0 - 2024-01-03

Added

  • Add support for building on MacOS
  • Add support for stateless reset
  • Release tls_conf_selector as soon as the handshake is completed.
  • Add linear mode and upper limit for probe timeout
  • Add FFI enable_multipath()/set_multipath_algorithm()
  • Add RoundRobin multipath scheduler
  • Add more units test for multipath transport
  • tquic_client: stop trying and exit if it fails to reconnect the server multiple times.
  • tquic_client: output the stats first and then exit when it receives an SIGINT signal.

Changed

  • Simplify FFI quic_set_logger() to avoid from return unnecessary errors
  • Rename set_multipath() in Config to enable_multipath()
  • Rename set_multipath_algor() in Config to set_multipath_algorithm()
  • Change default congestion control algorithm to BBR

Fixed

  • Fix stream scheduling for multiple incredmental streams
  • Fix reinjection for multipath transport

v0.4.0 - 2023-12-18

Added

  • Add config API for initial_congestion_window/min_congestion_window
  • Add congestion_control_algor option for tquic_client/tquic_server
  • Add initial_congestion_window/min_congestion_window option for tquic_client/tquic_server
  • Add more unittest cases for delivery_rate/minmax
  • Simplify ffi feature in tls module
  • Add typos.toml and fix all typos
  • Add a workflow for goodput measurements

Changed

  • Rename tquic_apps to tquic_tools
  • Move examples to tquic-group/tquic-examples-* repos

Fixed

  • Keep cc unchanged for non-data packets (e.g., Initial and Handshake)
  • Update the LICENSE file

v0.3.0 - 2023-12-01

Added

  • Simplify the usage of Endpoint
  • Add config API for stateless retry
  • Add config API for initial RTT
  • Add quic_conn_index() for getting connection index
  • tquic_client: create the output directory if it does not exist
  • tquic_client: convert unspecified address to localhost address
  • tquic_client: prompt help messages for wrong command args
  • tquic_client: print statistics at the end of execution
  • Improve unit testing
  • Improve static analysis

Changed

  • endpoint: change Endpoint.close() to support forcily close the endpoint
  • endpoint: quic_endpoint_new() no longer takes ownership of the resources provides by the C caller
  • tquic_client: change -p option to write the response header and body to stdout

Fixed

  • Ignore packets with unknown dcid
  • Fix bandwidth over-estimation issue
  • Improve interop testing and resolve new found issues

v0.2.0 - 2023-11-09

Added

  • Optimize the writing of stream frames
  • Improve fuzz testing

Security

  • Fix frame issues found by fuzz testing

v0.1.0 - 2023-11-01

Added

  • Support QUIC v1 and HTTP/3 protocols.
  • Support congestion control algorithms such as CUBIC, BBR, BBRv3, and COPA.
  • Provide experimental support for Multipath Transport, including MinRTT and Redundant algorithms.
  • Provide APIs for Rust, C, and C++.
  • Provide example clients and servers.