Skip to content

Latest commit

 

History

History
784 lines (666 loc) · 33.9 KB

CHANGELOG.md

File metadata and controls

784 lines (666 loc) · 33.9 KB
Raw

SourceSpec Changelog

Earthquake source parameters from P- or S-wave displacement spectra

Copyright (c) 2011-2024 Claudio Satriano [email protected]

unreleased

Input/output

  • HTML report improvements:
    • Link to supplementary files and plots in the HTML report
    • Display configuration, log and output files in a modal window with syntax highlighting (only when the HTML report is served by a web server)

Processing

  • New config parameter refine_theoretical_arrivals to refine the theoretical P and S arrival times using a simple autopicker based on the smoothed envelope of the trace
  • New config parameter clipping_min_amplitude_ratio to set a threshold for trace amplitude below which the trace is not checked for clipping

Plotting

  • New plot: raw traces
  • Stacked spectra: color spectral curves according to the weighting function
  • Spectral plots: show information on the reason why a fit failed
  • plot_sourcepars: possibility of selecting the latest runid for each event
  • plot_sourcepars: new plot type: static stress drop vs. depth
  • Support for Matplotlib 3.9

Config file

  • New config parameters: refine_theoretical_arrivals, autopick_freqmin, autopick_debug_plot
  • New config parameter clipping_min_amplitude_ratio
  • Improved documentation for the sn_min and spectral_sn_min parameters

Bugfixes

  • Fix for rejected spectra still being plotted in the stacked spectra plot
  • Fix for corner case where all the inversion errors are zero
  • Fix I/O error when reading PAZ files
  • Fix for event ids in SourceSpec event file being only numbers: they are now correctly interpreted as strings
  • Fix for ignored picks for certain kind of QuakeML files (like the ones from USGS) where the phase name is not in the <phase_hint> attribute of the <pick> element but in the <phase> attribute of the corresponding <arrival> element

v1.8 - 2024-04-07

This long overdue release brings many improvements, new features and bugfixes gradually introduced during the last year.

Release highlights:

  • New file formats for events and spectra
  • New configuration options to better specifify velocity and density models
  • Better support for P-wave inversion and teleseismic events
  • Radiation pattern correction from focal mechanism in radiated energy computation
  • Option for travel time-based signal window length
  • More options to control the calculation of source radius and stress drop
  • Improved estimation of radiated energy
  • New source parameter: apparent stress
  • Fix for map tiles not plotted anymore

This release requires at least Python 3.7.

Warning: the SQLite database used by this version is not compatible with previous versions. You will need to upgrade your old database manually or using source_spec -u DATABASE_FILE_NAME.

Make sure to read the detailed Changelog below 👇

v1.8: Input/output

  • Introducing a new file format for providing event information (hypocentral location, magnitude, focal mechanism, moment tensor): the SourceSpec Event File.
  • New HDF5 and TEXT file formats to store spectra
  • Station residuals are now saved in an HDF5 spectrum file, instead of a pickle file
  • New config file option save_spectra to save the spectra to an HDF5 file in the output directory
  • Changes in the YAML output file:
    • bsd (Brune stress drop) parameter renamed to ssd (static stress drop)
    • Store in the event_info section the values of vp, vs and rho close to the hypocenter
    • Store in the inversion_info section the type of wave used for the inversion (P, S, SV or SH)
  • Changes in the SQLite database (warning: these changes break compatibility with previous database versions):
    • bsd (Brune stress drop) parameter renamed to ssd (static stress drop)
    • Store the Stations table information on whether each parameter is an outlier (see #38)
    • Make place in the Stations table for station-level errors on radiated energy (even if they are currently not computed)
    • Store in the Events table the number of observations used for computing each summary parameter
    • Store in the Events table weighted means for radiated energy and local magnitude, even if those means are currently the same as the simple means, since those parameters do not have station-level errors defined
    • New columns for apparent stress in both Events and Stations tables
    • Store in the Events table the values of vp, vs and rho close to the hypocenter
    • Store in the Events table the type of wave used for the inversion (P, S, SV or SH)
  • New command line option (-u or --updatedb) to update an existing database from a previous version
  • Input files are now linked symbolically in the input_files subdirectory of the output directory (not implemented for Windows)
  • New command line option (-R or --run_id_subdir) to use run_id (if defined) as a subdirectory of the event directory
  • Print event info to console and to log file
  • HTML report improvements:
    • Event name in the summary table, if available
    • Author, agency and run completion date in the summary table
    • SourceSpec version in the inversion information table
    • Link to input files
    • Information on the type of wave used for the inversion (P, S, SV or SH)

v1.8: Processing

  • Use all the available components to compute P-wave spectra (previously, only the vertical component was used)
  • Possibility of specifying a free surface amplification factor different from 2
  • Possibility of specifying a layered velocity and density model for the source
  • Possibility of specifying a different density for the source and for the stations
  • If density is not provided (i.e., it is None), use the density from the global velocity model "iasp91"
  • Teleseismic geometrical spreading model (Okal, 1992)
  • New weighting option based on inverse frequency, so that lower frequencies have larger weight in the inversion. If traces contain noise, weights will be set to zero where SNR < 3 (see #37)
  • For weights computed from spectral S/N ratio (noise weighting), set to zero all the weights below 20% of the maximum weight, so that these weakly constrained parts of the spectrum are ignored in the inversion
  • Possibility of using variable signal window lengths for each station as a function of the travel time of the P or S wave (see #48)

v1.8: Inversion

  • Possibility of using the magnitude (or scalar moment) provided in the event file as initial Mw value for the inversion
  • Reintroduced the possibility of providing the variability around the initial Mw value
  • By combining the previous options, it is now possible to fix the Mw value during the inversion to the value provided in the event file

v1.8: Post-Inversion

  • Possibility of choosing the "k" coefficient to compute source radius from corner frequency (Kaneko and Shearer, 2014)
  • Better control on the frequency range used for computing radiated energy (see #49)
  • Use station-specific radiation pattern (when available) for computing radiated energy
  • Take into account for energy partition when computing radiated energy (Boatwright and Choy, 1986). This affects mostly the radiated energy computed from P waves
  • New source parameter: apparent stress
  • For parameters with no station-level uncertainty defined (currently, radiated energy and local magnitude), use simple mean when computing summary weighted averages (the previous behavior was to not compute weighted averages for these parameters)

v1.8: Plotting

  • Show the station radiated energy (Er) value on the station spectra plots
  • Show the summary radiated energy (Er) value on the stacked spectra plot
  • Station maps improvements:
    • Possibility of choosing a basemap style or no basemap
    • Possibility of not plotting the coastlines
    • Exclude outliers when computing colorbar limits
    • Improved computation of bounding box for regional and teleseismic events
    • Use a global orthographic projection when using stations at large teleseismic epicentral distances (more than 3000 km)
  • Changes to plot_sourcepars:
    • Read vp, vs and rho from the SQLite database (previously: vs was hardcoded to 3.5 km/s, rho to 2700 kg/m3 and vp was not used)
    • Read the source radius "k" coefficient from the SQLite database (previously: "k" was hardcoded to 0.3724, value for the Brune model)
    • New command line option --wave_type to select the wave type (P, S, SV or SH) for plots involving the corner frequency
    • Possibility of plotting histogram of apparent stress
    • Option to filter events by apparent stress

v1.8: Config file

  • New config parameter epi_dist_ranges to select stations within one or more ranges of epicentral distances. It replaces the old parameter max_epi_dist.
  • New config parameter free_surface_amplification to specify the free surface amplification factor (default: 2)
  • New config parameter layer_top_depths to specify the depth of the top of the layers in a layered velocity and density model
  • The config parameters vp_source, vs_source and rho_source can now be lists of values, to specify a layered velocity and density model for the source
  • Config parameter rho renamed to rho_source
  • New config parameter rho_stations
  • New config parameter geom_spread_min_teleseismic_distance to set the minimum epicentral distance for using the teleseismic geometrical spreading model
  • New config parameters kp and ks to set the "k" coefficient for computing source radius from corner frequency
  • Config parameter pi_bsd_min_max renamed to pi_ssd_min_max
  • New option inv_frequency for the config parameter weighting (see #37)
  • Config parameter max_freq_Er replaced by Er_freq_range (see #49)
  • New parameters, qml_event_description and qml_event_description_regex, to obtain the event name from the QuakeML event "description" tag
  • New parameter Mw_0_from_event_file to use the magnitude (or scalar moment) provided in the event file as initial Mw value for the inversion
  • Reintroduced the parameter Mw_0_variability to set the variability around the initial Mw value
  • New parameter plot_save_asap to save plots as soon as they are ready. This uses less memory but slows down the code.
  • New parameter plot_map_style to choose the map style
  • New parameter plot_map_api_key to provide a Stadia Maps api key for Stamen Terrain basemap
  • New option for the parameter plot_coastline_resolution: no_coastline
  • New config parameter variable_win_length_factor to specify window length as a fraction of the travel time of the P/S wave (see #48)

v1.8: Bugfixes

  • Fix source radius computation when using P waves (use P-wave velocity instead of S-wave velocity)
  • Do not ignore picks labeled with lowercase "p" or "s"
  • Fixed: config parameter p_arrival_tolerance was used also for S waves, instead of s_arrival_tolerance (see #35)
  • Fix Boatwright spreading model (log10 instead of natural log)
  • Fix bug where signal and noise windows were plotted with the wrong length, under certain circumstances (see #35)
  • Fixes related to records with short signal windows (see #39)
  • Fix for beachball not plotted anymore with recent versions of Matplotlib.
  • Fix bug where traces ignored because of low spectral S/N ratio, where still plotted as if they were valid traces
  • Fix bug when specifying an absolute path for output directory: the path was treated as relative (see #40)
  • Fix bug where paths starting with tilde (~) were not parsed correctly (see #43 and #44)
  • Fix bug where local magnitude was not written to the HYPO71 output file, when using weighted mean as reference statistics
  • Fix for Stamen Terrain basemap now requiring an API key from Stadia Maps

v1.8: Requirements

  • Python minimum version raised to 3.7
  • Matplotlib minimum version raised to 3.2
  • Cartopy minimum version raised to 0.21

v1.7 - 2023-03-31

This release improves trace processing through the use of modern routines for instrument correction, optional baseline removal, a new clipping detection algorithm and a better definition of signal and noise time windows.

A new plot is introduced, "stacked spectra" which allows to compare all the spectra at once (and easily detect problematic stations 😉). Also, a new command line tool, plot_sourcepars, allows making aggregate plots of source parameters for many events (starting from the SQLite database).

New config file parameters have been added, while some have been removed. Please run source_spec -U CONFIG_FILE_NAME to update your old config file.

As always, many bugfixes and improvements have been made in this release. Thanks to all the users who took time to write and ask questions (by mail or using the official SourceSpec Discussions).

Big kudos to Kris Vanneste @krisvanneste who helped all along the development with code review and testing and submitted pull requests on noise windows and clipping detection.

Below is the detailed Changelog 👇

v1.7: Input/output

  • Possibility of using a single PAZ file as a "generic" PAZ file for all the stations
  • Command line option --station_metadata (or -w) for overriding the config file parameter with the same name (see pull request #16)
  • Removed command line option --no-response for avoiding removing instrument response (use the config option correct_instrumental_response instead)
  • New output file in YAML format. The old .out file is still available but deprecated.
  • Information on the inversion procedure in YAML and HTML output
  • Option to add an agency logo to the HTML page
  • Possibility of generating HTML report without figures (see #30)

v1.7: Processing

  • Use modern ObsPy trace.remove_response() routine for instrument correction (see #27)
  • Option to remove the trace baseline after instrument correction and before filtering (remove_baseline config parameter) (see #25)
  • New algorithms for clipping detection based on kernel density estimation of the trace amplitude values (see #23, #24, #25)
    • Two methods are available:
      • clipping_score: compute a trace clipping score based on the shape of the kernel density estimation.
      • clipping_peaks: check if trace is clipped, based on the number of peaks in the kernel density estimation;
    • Use clipping_detection_algorithm in the config file to choose the algorithm and the other clipping_* parameters to adjust the results.
    • The algorithms can also be called from the command line, e.g. for debug purposes, using the shell command clipping_detection.
  • Relax noise window requirements if noise weighting is not used. This is useful for older triggered records with noise windows that are short or even missing entirely (see pull request #18)
  • Some small improvements were made in the window definitions (see pull request #18):
    • Generate error if signal window is incomplete (P- or S-arrival before the start time of the trace)
    • Warn if noise window overlaps with P-window (instead of S-window, as in previous versions)
    • Constrain signal_pre_time for S-phase to half the S-P interval, if this interval is shorter than signal_pre_time (i.e., for short-distance records with short S-P interval)
  • Extract source and station P and S velocities from global 'iasp91' velocity model, if both v(p,s)_source and v(p,s)_stations are set to None (see #20)
  • Magnitude limits for inversion are now autoset between 90% of the minimum of the spectral plateau and 110% of its maximum (see #22)

v1.7: Post-Inversion

  • Possibility of choosing the reference summary statistics that will be used for map plots, QuakeML and HYPO output, as well as for the "Event Summary" section in HTML report and for computing station spectral residuals. Available summary statistics are:
    • mean
    • weighted_mean
    • percentiles (new!)
  • Possibility of defining the number of sigmas for uncertainties on event means and weighted means

v1.7: Plotting

  • New plot: stacked spectra
  • Do not zero-pad traces to common length when plotting, so that missing data at beginning or at the end can be easily detected (see #21)
  • Plot noise and signal windows separately for each component (see #21)
  • Show on the trace plot the reason why a trace has been ignored
  • Logscale for boxplots, if parameters span a large interval (see pull request #15)
  • Support for SVG format for plot files (can be used in HTML output as alternative to PNG)
  • Improved trace plot quality for vector formats (PDF, SVG)
  • New command line tool: plot_sourcepars to make 1D or 2D plot of source parameters from a sqlite parameter file.

v1.7: Config file

  • Removed sensitivity_only option from correct_instrumental_response
  • Removed config parameter: Mw_0_variability
  • Removed config parameter: clip_max_percent
  • New config parameter: remove_baseline
  • New config parameters for clipping detection:
    • clipping_detection_algorithm
    • clipping_debug_plot
    • clipping_score_threshold
    • clipping_peaks_sensitivity
    • clipping_peaks_percentile
  • Config file section AVERAGES PARAMETERS renamed to SUMMARY STATISTICS PARAMETERS
  • New config parameter: reference_statistics
  • New config parameter: n_sigma
  • New config parameters for percentiles calculation: lower_percentage, mid_percentage and upper_percentage
  • New config parameters for filtering and spectral windowing of displacement signals:
    • bp_freqmin_disp, bp_freqmax_disp
    • freq1_disp, freq2_disp
  • Default values for t_star_min_max (instead of None)

v1.7: Code improvements

  • Large refactoring of the whole codebase, to make the code more modern and easier to maintain (see #28)

v1.7: Bugfixes

  • Properly ignore vertical components when ignore_vertical is True
  • Fix a bug preventing reading phase picks from HYPOINVERSE-2000 files
  • Fix for noise window not showing up in PNG trace plots in some cases
  • Fix reading velocities from NLL model (see #20)
  • HTML report: better scrollbars for station table across all the browsers
  • Fix for cropped map for very large station-to-event distances (greater than 500 km)
  • Fix a bug in generating evid form origin time when reading origin time from SAC header and the number of seconds was 59
  • Fix a crash when no map tiles were available at the selected zoom level
  • Fix for a corner case where the three components of the same instrument have different trace length (see #31)
  • Fix source_residuals, which didn't work anymore

v1.6 - 2022-08-02

This release introduces several modifications to the config file. You will need to upgrade your old config files manually or using source_spec -U CONFIG_FILE_NAME.

This release requires at least Python 3.6.

A lot of effort has been devoted to improve the documentation. Please check it out on https://sourcespec.readthedocs.io/

v1.6: Input/output

  • QuakeML output (when using QuakeML input)
  • Command line option --run-id to provide a string identifying the current run (see pull request #6)
  • Write SourceSpec version to parfile
  • Write SourceSpec version and run complete time to SQLite file
  • Write author and agency info (if specified) to output files, figures and HTML report
  • HTML page for misfit plots (when using grid search or importance sampling)
  • Station table in HTML report is now sortable (and its header remains fixed)!
  • Reduce PNG figures file size, while improving their resolution 😃
  • Removed option to read event information and traces from a pickle file (rarely used)

v1.6: Processing

  • Support for P-wave spectral inversion (see pull request #9)
  • It is now possible to provide different vp and vs velocities, close to the source and close to the stations (see the new config options above and issue #5)
  • Possibility to choose a geometrical spreading model between (see issue #8):
    • rⁿ (default: n=1 – body waves)
    • Boatwright et al. (2002): "r" below a cutoff distance, frequency-dependent above the cutoff distance
  • Use travel time to compute quality factor from t* (and viceversa) (see issue #5)
  • Compute travel time from pick and origin time, when possible (see issue #10)
  • Warn if noise window ends after P or S arrival

v1.6: Post-Inversion

  • Subtract the integral of noise spectrum from the integral of signal spectrum when computing radiated energy, under the hypothesis that energy is additive and noise is stationary

v1.6: Config file

  • Config parameter paz has been removed and merged into station_metadata
  • Config parameters vp and vs have been renamed to vp_source and vs_source (see issue #5)
  • New, optional, config parameter vp_stations and vs_stations
  • Config parameter pre_p_time and pre_s_time have been renamed to noise_pre_time and signal_pre_time, respectively (see pull request #9)
  • Config parameter rps_from_focal_mechanism renamed to rp_from_focal_mechanism (see pull request #9)
  • New config parameter: geom_spread_model (see issue #8)
  • Config parameters PLOT_SHOW, PLOT_SAVE and PLOT_SAVE_FORMAT are now lowercase (plot_show, plot_save and plot_save_format)
  • New, optional, general config parameters for specifying author and agency information. This information is written to output files and figures, if specified
  • New config parameter, event_url, to link the event page from the HTML report
  • Removed DEBUG config parameter
  • Parameters from GENERAL PARAMETERS section reorganized into a new section called TRACE AND METADATA PARAMETERS
  • Some parameters from INVERSION PARAMETERS moved into a new section called SPECTRAL MODEL PARAMETERS

v1.6: Bugfixes

  • Fix for not working weighting options: frequency and no_weight
  • Fix for negative weights occasionally generated by interpolation
  • Fix bug when event coordinates are written into sqlite as binary blobs

v1.5 - 2022-05-22

This is a pretty big release coming after several months of work on a large dataset of more than 5000 events in Mayotte.

Please read through the changelog to discover all the improvements and new features.

You will need to update your old config files via source_spec -U CONFIG_FILE_NAME

Note that v1.5 is no more compatible with Python 2!

v1.5: Input/output

  • Write output files into a subdirectory of OUTDIR, whose name is the event id
  • Support for HYPOINVERSE-2000 output files
  • Removed autodetection of hypo71 file paths (specific to CRL case)
  • SQLite output: added radiated energy, weighted averages, errors on parameters, number of observations, hypocentral location and origin time
  • Removed -C argument to apply station correction to spectra. Now spectra are automatically corrected if residuals_filepath is specified in the configuration file
  • Save an additional event parameter to output files: average quality factor
  • Save additional station parameters to output files: source radius, Brune stress drop, source radius, quality factor
  • Mark outliers in .out file and in html report
  • Colored console output for log messages! (Not supported on Windows)

v1.5: Processing

  • New parameter for setting the width of the spectral smoothing window in terms of frequency decades: spectral_smooth_width_decades (see issue #2)
  • Compute spectral weights after spectral correction (when a station residuals file is specified via residuals_filepath)
  • Removed configuration parameter trace_format
  • New configuration parameter sensitivity to provide a constant sensor sensitivity (flat response curve), which overrides any response curve provided in metadata
  • New parameter for manually specifying trace units: trace_units (defaults to auto)
  • New approach for trace clipping detection (requires just one configuration parameter, named clip_max_percent)
    • Check for trace clipping only in the processing window
    • Use histogram of samples to detect clipping
  • Fix for wrong component used for 'SV' spectra (see issue #3)

v1.5: Inversion

  • New config option: Mw_0_variability. Allowed variability around Mw_0 during the main inversion. Previously hardcoded to 0.1
  • New inversion methods for grid sampling:
    • grid search (very slow!)
    • importance sampling of the misfit grid using k-d tree (faster, but less accurate)
  • Fix for Basin-hopping algorithm not running

v1.5: Post-Inversion

  • New set of post-inversion parameters to reject certain inversion results, per-station: pi_fc_min_max, pi_t_star_min_max, pi_bsd_min_max, pi_misfit_max
  • Reject inversion results when inverted fc is within 10% of fc_min or fc_max
  • Fix: use logarithmic error width for weighted logarithmic averages
    • previous way of computing weighted logarithmic averages was not correct!
  • Option to reject outliers using the IQR (interquartile range) method: parameter nIQR
  • Support for non symmetric error on station spectral parameters
  • Compute additional, per-station parameters: source radius, Brune stress drop and quality factor
  • Compute errors for all station parameters
  • Compute weighted averages for all event parameters (except radiated energy)
  • Compute spectral residuals using weighted average spectral parameters

v1.5: Plotting

  • Source parameter box plots to evaluate parameter dispersion across stations and visually detect outliers
  • Misfit plot (2D and 1D) when using grid sampling
  • cartopy removed as installation dependency, since it is not easily installable via pip
  • Use GSHHS database to draw coastlines.
    • New config option: plot_coastline_resolution
  • Correctly show circles on maps with diagonal smaller than 1 km
  • Fix plotting map colorbar on Matplotlib 3.5
  • Make average and errorbar lines more visible on map colorbar
  • Fix for error on plotting fc map, when only one station is available
  • Fix trace plot scaling for traces with larger signal outside the plot window
  • Do not plot 'H' spectrum if there is only one instrument component (since it will coincide with the only component)
  • Plot uncorrected spectrum when station correction is used

v1.4 - 2021-10-13

  • New config option rps_from_focal_mechanism to compute station-specific S-wave radiation pattern from focal mechanism, if a focal mechanism is available in the QuakeML file
  • Plot the focal mechanism on maps, if it is available
  • Change default inversion algorithm to TNC (truncated Newton algorithm)
  • Config option dataless renamed to station_metadata
  • Config option traceids renamed to traceid_mapping_file
  • Config options ignore_stations and use_stations renamed to ignore_traceids and use_traceids, respectively
  • Support for 2D NonLinLoc grids (via nllgrid >= 1.4.1)
  • Possibility of using a generic DEFAULT NonLinLoc time grid
  • Added cartopy as an installation dependency
  • Fixed: nllgrid was always requested at runtime
  • Fixed: gracefully handle the case when there is no internet connection and map tiles cannot be downloaded
  • Fixed (Windows): suppress colored terminal output, which is not supported
  • Fixed (Windows): it is now possible to relaunch the same run, without having to delete the output directory first
  • Fixed (Windows): use same timezone names than Linux and macOS

v1.3.1 - 2021-09-13

  • Fix for HTML report not showing trace and spectral plots
  • HTML report: add Corner Frequency in Event Summary

v1.3 - 2021-08-20

  • HTML reports
  • Option to provide station-specific spectral windowing

v1.2 - 2021-05-20

  • Use python-versioneer to manage version numbers

v1.1 - 2021-04-07

  • Bug fixes:
    • Accept band code C for broadband seismometers sampled at >=250 Hz
    • Require cartopy>=0.18 for compatibility with matplotlib>=3.3

v1.0 - 2021-03-03

  • Simplification of time window parameters:
    • an unique window length, win_length, is used for time-domain S/N ratio calculation and spectral analysis
    • the old parameters, noise_win_length and s_win_length, are no more supported and generate an error
  • Reorganized config file and improved inline documentation within the file
    • removed unused option: fc_0
    • removed pre_filt option
    • post-processing check on fc bounds has been removed
  • Option to specify non standard instrument codes (e.g., L for acceleration)
  • Option to specify filter frequencies for local magnitude computation
  • Plotting improvements:
    • Show S/N ratio on trace plots
    • Show spectral S/N ratio on spectrum plots
    • Option to show/hide ignored traces/spectra (low S/N)
  • Bug fixes:
    • Pay attention to location code when building average spectra
    • Plotting: avoid overlapping traces with different location code
    • Plotting: avoid overlapping spectra with different location code

v0.9 - 2020-04-24

  • Support for QuakeML input and StationXML
  • Support for Python 3.5
  • Only compatible with ObsPy >= 1.1.0
  • Project reorganization:
    • Project renamed to SourceSpec
    • ssp_residuals renamed to source_residuals
    • New installable package (e.g., via pip)
  • Spectra are smoothed in log-freq (no more Konno-Ohmachi)
  • Inversion is performed in a log-freq space
  • Option to invert for t_star_0 on the plateau level
  • Traces are filtered before computing S/N ratio
  • Trace clipping detection
  • Traces are always plotted, even if no inversion is performed
  • Use by default a global model for theoretical travel time calculation
  • Possibility of using NonLinLoc travel time grids (requires nllgrid)
  • New options for P and S arrival time tolerance
  • New option for maximum epicentral distance for trace processing
  • Possibility of using a NonLinLoc model grid for obtaining vs at the source and at the receiver (requires nllgrid)
  • Use log10 of weighting function, since the inversion is done in magnitude units
  • Use json format for traceid correction file
  • Save config file to output dir (only for source_spec)
  • Save run completion time into output file
  • Logarithmic average and logarithmic (asymmetric) error bars for Mo, fc and source radius
  • Computation of radiated energy
  • Station-specific filters
  • New parameters: gap_max, overlap_max
  • Add legend to spectral plots
  • Add event information, code version and run completion time to plots
  • Multifigure plotting for traces and spectra (for large number of stations)
  • New option to plot a station map, color-coded by station magnitude (requires Cartopy)
  • Refactoring of local magnitude computation code:
    • Wood-Anderson amplitude is computed from the whole trace converted to W-A and not converting only the min and max peaks (which is the default in ObsPy)
    • Trace windowing is computed on HF envelopes
    • New option for custom Ml coefficients
    • Remove unnecessary Ml options
  • Code cleaning and optimization:
    • Switch from optparse (deprecated) to argparse
    • Code style fixes and refactoring
  • New option to update a config file from previous versions
  • BUGFIX: Fix a major bug in reading hypo pick file
  • BUGFIX: Fix for pick file not read in source_model

v0.8 - 2014-07-11

  • Trace plot showing S and noise time windows
  • Improved handling of paz files
  • Per-station Mo on output file
  • Code cleaning and optimization

v0.7 - 2014-04-07

  • Code reorganization:
    • inversion code split to its own functions
  • Option to use bounded inversion
  • Station residuals, through ssp_residuals.py
  • source_model can now output tables of trade-off between parameters
  • Fix in the way noise trace is computed and processed
  • Documentation!

v0.6 - 2013-06-05

  • Signal to noise weighting
  • Improved local magnitude computation
  • New options:
    • time domain integration
    • vertical component
  • Largely improved plotting function
  • More data formats supported (Antilles, IPOC)
  • source_model: a code for plotting theoretical spectra
  • Code refactoring

v0.5 - 2013-02-10

  • Azimuth computation
  • Construction of an overall database
  • Local magnitude computation
  • konnoOhmachiSmoothing

v0.4 - 2012-04-10

  • Logging infrastructure
  • Code reorganization

v0.3 - 2012-02-10

  • Output is no more printed at screen, but to file
  • The plots can be saved to a file as well
  • We differentiate between short periods and broad bands

v0.2 - 2012-02-06

Extended and generalized for the CRL application.

v0.1 - 2012-01-17

Initial Python port.