.spacemacs

;; -*- mode: emacs-lisp; lexical-binding: t -*-
;; This file is loaded by Spacemacs at startup.
;; It must be stored in your home directory.

(defun dotspacemacs/layers ()
  "Layer configuration:
This function should only modify configuration layer settings."
  (setq-default
   ;; Base distribution to use. This is a layer contained in the directory
   ;; `+distribution'. For now available distributions are `spacemacs-base'
   ;; or `spacemacs'. (default 'spacemacs)
   dotspacemacs-distribution 'spacemacs-base

   ;; Lazy installation of layers (i.e. layers are installed only when a file
   ;; with a supported type is opened). Possible values are `all', `unused'
   ;; and `nil'. `unused' will lazy install only unused layers (i.e. layers
   ;; not listed in variable `dotspacemacs-configuration-layers'), `all' will
   ;; lazy install any layer that support lazy installation even the layers
   ;; listed in `dotspacemacs-configuration-layers'. `nil' disable the lazy
   ;; installation feature and you have to explicitly list a layer in the
   ;; variable `dotspacemacs-configuration-layers' to install it.
   ;; (default 'unused)
   dotspacemacs-enable-lazy-installation 'unused

   ;; If non-nil then Spacemacs will ask for confirmation before installing
   ;; a layer lazily. (default t)
   dotspacemacs-ask-for-lazy-installation t

   ;; List of additional paths where to look for configuration layers.
   ;; Paths must have a trailing slash (i.e. `~/.mycontribs/')
   dotspacemacs-configuration-layer-path '()

   ;; List of configuration layers to load.
   dotspacemacs-configuration-layers
   '(
     ;; ----------------------------------------------------------------
     ;; Example of useful layers you may want to use right away.
     ;; Uncomment some layer names and press `SPC f e R' (Vim style) or
     ;; `M-m f e R' (Emacs style) to install them.
     ;; ----------------------------------------------------------------
     (
      auto-completion
       :variables
                       auto-completion-return-key-behavior 'complete
                       auto-completion-tab-key-behavior 'complete
                       auto-completion-complete-with-key-sequence "fj"
                       auto-completion-complete-with-key-sequence-delay 2.0
                       auto-completion-idle-delay nil
                       auto-completion-private-snippets-directory nil
                       auto-completion-enable-snippets-in-popup t
                       auto-completion-enable-help-tooltip nil
                       auto-completion-use-company-box t
                       auto-completion-enable-sort-by-usage nil)
     spacemacs-completion
     spacemacs-defaults
     spacemacs-evil
     spacemacs-project
     spacemacs-navigation
     spacemacs-editing-visual
     spacemacs-editing
     spacemacs-visual
     spacemacs-modeline
     ;; latex
     ;; xclipboard
     ;; emacs-lisp
     git
     ivy
     treemacs
     ;;semantic
     (lsp :variables
          lsp-navigation 'both
          lsp-modeline-diagnostics-enable t
          lsp-modeline-diagnostics-scope 'file
          lsp-enable-imenu t
          lsp-ui-sideline-show-hover nil
          lsp-ui-sidine-symbol t
          lsp-ui-sideline-enable nil
          lsp-ui-flycheck-enable t
          lsp-ui-doc-enable nil
          lsp-ui-doc-display nil
          lsp-ui-flycheck-live-reporting nil
          lsp-lens-enable t
          lsp-headerline-breadcrumb-enable t
          lsp-headerline-breadcrumb-icons-enable nil
          lsp-log-max nil
          lsp-enable-on-type-formatting t
          lsp-enable-symbol-highlighting nil
          lsp-enable-indentation nil
          lsp-before-save-edits t
          lsp-file-watch-threshold 30000
          lsp-use-upstream-bindings nil
          )
     ;; rust
     ;; markdown
     multiple-cursors
     ;; restructuredtext
     ;; org
     ;;(shell :variables
     ;;       shell-default-height 30
     ;;       shell-default-position 'bottom
     ;;       shell-default-shell 'vterm
     ;;       close-window-with-terminal t
     ;;       shell-default-full-span t)
     syntax-checking
     version-control
     (c-c++ :variables
            c-c++-adopt-subprojects t
            c-c++-backend 'lsp-clangd
            ;;c-c++-lsp-enable-semantic-highlight 'rainbow
            c-c++-enable-clang-format-on-save nil
            )
     (tabs :variables tabs-highlight-current-tab 'left)
     )
   ;; List of additional packages that will be installed without being wrapped
   ;; in a layer (generally the packages are installed only and should still be
   ;; loaded using load/require/use-package in the user-config section below in
   ;; this file). If you need some configuration for these packages, then
   ;; consider creating a layer. You can also put the configuration in
   ;; `dotspacemacs/user-config'. To use a local version of a package, use the
   ;; `:location' property: '(your-package :location "~/path/to/your-package/")
   ;; Also include the dependencies as they will not be resolved automatically.
   dotspacemacs-additional-packages '()

   ;; A list of packages that cannot be updated.
   dotspacemacs-frozen-packages '()

   ;; A list of packages that will not be installed and loaded.
   dotspacemacs-excluded-packages '(
                                    auto-complete
                                    auto-yasnippet
                                    auto-highlight-symbol
                                    ac-ispell
                                    ace-pinyin
                                    ace-Pinyin-Global
                                    ace-jump-helm-line
                                    ace-link
                                    chinese-wbim
                                    ccls
                                    coffee-mode
                                    company-rtags
                                    centered-cursor-mode
                                    company-ycmd
                                    counsel-gtags
                                    clang-format
                                    company-c-headers
                                    cpp-auto-include
                                    column-enforce-mode
                                    chinese-conv
                                    dired-quick-sort
                                    dotenv-mode
                                    drag-stuff
                                    devdocs
                                    evil-args
                                    evil-numbers
                                    evil-nerd-commenter
                                    evil-lion
                                    evil-indent-plus
                                    evil-tutor
                                    evil-surround
                                    evil-vimish-fold
                                    evil-lisp-state
                                    evil-cleverparens
                                    evil-textobj-line
                                    evil-exchange
                                    evil-escape
                                    expand-region
                                    gitignore-templates
                                    git-modes
                                    git-link
                                    ghub
                                    gh-md
                                    help-fns+
                                    highlight-symbol
                                    helm-gtags
                                    helm-rtags
                                    helm-company
                                    helm-c-yasnippet
                                    helm-cscope
                                    helm-make
                                    holy-mode
                                    hide-comnt
                                    open-junk-file
                                    org-mime
                                    org-pomodoro
                                    org-present
                                    orgit
                                    org-projectile
                                    org-rich-yank
                                    org-superstar
                                    org-cliplink
                                    origami
                                    rainbow-delimiters
                                    symon
                                    smeargle
                                    quickrun
                                    htmlize
                                    flx-ido
                                    find-by-pinyin-dired
                                    elisp-slime-nav
                                    editorconfig
                                    eyebrowse
                                    fancy-battery
                                    browse-at-remote
                                    uuidgen
                                    dumb-jump
                                    flycheck
                                    flycheck-rtags
                                    flycheck-ycmd
                                    rtags
                                    gtags
                                    ycmd
                                    disaster
                                    gdb-mi
                                    google-c-style
                                    realgud
                                    xcscope
                                    dap-mode
                                    ivy-rtags
                                    ivy-yasnippet
                                    emacsql
                                    emacsql-sqlite
                                    forge
                                    gnuplot
                                    pyim
                                    gendoxy
                                    aggressive-indent
                                    eval-sexp-fu
                                    hungry-delete
                                    link-hint
                                    lorem-ipsum
                                    password-generator
                                    smartparens
                                    spacemacs-whitespace-cleanup
                                    smex
                                    space-doc
                                    spaceline-all-the-icons
                                    string-inflection
                                    vim-powerline
                                    persistent-scratch
                                    unkillable-scratch
                                    string-edit
                                    dumb-jump
                                    define-word
                                    desktop
                                    zoom-frm
                                    google-translate
                                    toc-org
                                    vi-tilde-fringe
                                    vimish-fold
                                    Ido-Vertical
                                    writeroom-mode
                                    Winner
                                    Powerline
                                    string-edit-at-point
                                    Xterm-Mouse
                                    )

   ;; Defines the behaviour of Spacemacs when installing packages.
   ;; Possible values are `used-only', `used-but-keep-unused' and `all'.
   ;; `used-only' installs only explicitly used packages and deletes any unused
   ;; packages as well as their unused dependencies. `used-but-keep-unused'
   ;; installs only the used packages but won't delete unused ones. `all'
   ;; installs *all* packages supported by Spacemacs and never uninstalls them.
   ;; (default is `used-only')
   dotspacemacs-install-packages 'used-only))

(defun dotspacemacs/init ()
  "Initialization:
This function is called at the very beginning of Spacemacs startup,
before layer configuration.
It should only modify the values of Spacemacs settings."
  ;; This setq-default sexp is an exhaustive list of all the supported
  ;; spacemacs settings.
  (setq-default
   ;; If non-nil then enable support for the portable dumper. You'll need to
   ;; compile Emacs 27 from source following the instructions in file
   ;; EXPERIMENTAL.org at to root of the git repository.
   ;;
   ;; WARNING: pdumper does not work with Native Compilation, so it's disabled
   ;; regardless of the following setting when native compilation is in effect.
   ;;
   ;; (default nil)
   dotspacemacs-enable-emacs-pdumper nil

   ;; Name of executable file pointing to emacs 27+. This executable must be
   ;; in your PATH.
   ;; (default "emacs")
   dotspacemacs-emacs-pdumper-executable-file "emacs"

   ;; Name of the Spacemacs dump file. This is the file will be created by the
   ;; portable dumper in the cache directory under dumps sub-directory.
   ;; To load it when starting Emacs add the parameter `--dump-file'
   ;; when invoking Emacs 27.1 executable on the command line, for instance:
   ;;   ./emacs --dump-file=$HOME/.emacs.d/.cache/dumps/spacemacs-27.1.pdmp
   ;; (default (format "spacemacs-%s.pdmp" emacs-version))
   dotspacemacs-emacs-dumper-dump-file (format "spacemacs-%s.pdmp" emacs-version)

   ;; If non-nil ELPA repositories are contacted via HTTPS whenever it's
   ;; possible. Set it to nil if you have no way to use HTTPS in your
   ;; environment, otherwise it is strongly recommended to let it set to t.
   ;; This variable has no effect if Emacs is launched with the parameter
   ;; `--insecure' which forces the value of this variable to nil.
   ;; (default t)
   dotspacemacs-elpa-https t

   ;; Maximum allowed time in seconds to contact an ELPA repository.
   ;; (default 5)
   dotspacemacs-elpa-timeout 5

   ;; Set `gc-cons-threshold' and `gc-cons-percentage' when startup finishes.
   ;; This is an advanced option and should not be changed unless you suspect
   ;; performance issues due to garbage collection operations.
   ;; (default '(100000000 0.1))
   dotspacemacs-gc-cons '(100000000 0.1)

   ;; Set `read-process-output-max' when startup finishes.
   ;; This defines how much data is read from a foreign process.
   ;; Setting this >= 1 MB should increase performance for lsp servers
   ;; in emacs 27.
   ;; (default (* 1024 1024))
   dotspacemacs-read-process-output-max (* 1024 1024)

   ;; If non-nil then Spacelpa repository is the primary source to install
   ;; a locked version of packages. If nil then Spacemacs will install the
   ;; latest version of packages from MELPA. Spacelpa is currently in
   ;; experimental state please use only for testing purposes.
   ;; (default nil)
   dotspacemacs-use-spacelpa nil

   ;; If non-nil then verify the signature for downloaded Spacelpa archives.
   ;; (default t)
   dotspacemacs-verify-spacelpa-archives t

   ;; If non-nil then spacemacs will check for updates at startup
   ;; when the current branch is not `develop'. Note that checking for
   ;; new versions works via git commands, thus it calls GitHub services
   ;; whenever you start Emacs. (default nil)
   dotspacemacs-check-for-update nil

   ;; If non-nil, a form that evaluates to a package directory. For example, to
   ;; use different package directories for different Emacs versions, set this
   ;; to `emacs-version'. (default 'emacs-version)
   dotspacemacs-elpa-subdirectory 'emacs-version

   ;; One of `vim', `emacs' or `hybrid'.
   ;; `hybrid' is like `vim' except that `insert state' is replaced by the
   ;; `hybrid state' with `emacs' key bindings. The value can also be a list
   ;; with `:variables' keyword (similar to layers). Check the editing styles
   ;; section of the documentation for details on available variables.
   ;; (default 'vim)
   dotspacemacs-editing-style 'vim

   ;; If non-nil show the version string in the Spacemacs buffer. It will
   ;; appear as (spacemacs version)@(emacs version)
   ;; (default t)
   dotspacemacs-startup-buffer-show-version t

   ;; Specify the startup banner. Default value is `official', it displays
   ;; the official spacemacs logo. An integer value is the index of text
   ;; banner, `random' chooses a random text banner in `core/banners'
   ;; directory. A string value must be a path to an image format supported
   ;; by your Emacs build.
   ;; If the value is nil then no banner is displayed. (default 'official)
   dotspacemacs-startup-banner 'official

   ;; Scale factor controls the scaling (size) of the startup banner. Default
   ;; value is `auto' for scaling the logo automatically to fit all buffer
   ;; contents, to a maximum of the full image height and a minimum of 3 line
   ;; heights. If set to a number (int or float) it is used as a constant
   ;; scaling factor for the default logo size.
   dotspacemacs-startup-banner-scale 'auto

   ;; List of items to show in startup buffer or an association list of
   ;; the form `(list-type . list-size)`. If nil then it is disabled.
   ;; Possible values for list-type are:
   ;; `recents' `recents-by-project' `bookmarks' `projects' `agenda' `todos'.
   ;; List sizes may be nil, in which case
   ;; `spacemacs-buffer-startup-lists-length' takes effect.
   ;; The exceptional case is `recents-by-project', where list-type must be a
   ;; pair of numbers, e.g. `(recents-by-project . (7 .  5))', where the first
   ;; number is the project limit and the second the limit on the recent files
   ;; within a project.
   dotspacemacs-startup-lists '((bookmarks . 10)
                                (recents . 5)
                                (projects . 5))

   ;; True if the home buffer should respond to resize events. (default t)
   dotspacemacs-startup-buffer-responsive t

   ;; Show numbers before the startup list lines. (default t)
   dotspacemacs-show-startup-list-numbers t

   ;; The minimum delay in seconds between number key presses. (default 0.4)
   dotspacemacs-startup-buffer-multi-digit-delay 0.4

   ;; If non-nil, show file icons for entries and headings on Spacemacs home buffer.
   ;; This has no effect in terminal or if "all-the-icons" package or the font
   ;; is not installed. (default nil)
   dotspacemacs-startup-buffer-show-icons t

   ;; Default major mode for a new empty buffer. Possible values are mode
   ;; names such as `text-mode'; and `nil' to use Fundamental mode.
   ;; (default `text-mode')
   dotspacemacs-new-empty-buffer-major-mode 'text-mode

   ;; Default major mode of the scratch buffer (default `text-mode')
   dotspacemacs-scratch-mode 'text-mode

   ;; If non-nil, *scratch* buffer will be persistent. Things you write down in
   ;; *scratch* buffer will be saved and restored automatically.
   dotspacemacs-scratch-buffer-persistent nil

   ;; If non-nil, `kill-buffer' on *scratch* buffer
   ;; will bury it instead of killing.
   dotspacemacs-scratch-buffer-unkillable nil

   ;; Initial message in the scratch buffer, such as "Welcome to Spacemacs!"
   ;; (default nil)
   dotspacemacs-initial-scratch-message nil

   ;; List of themes, the first of the list is loaded when spacemacs starts.
   ;; Press `SPC T n' to cycle to the next theme in the list (works great
   ;; with 2 themes variants, one dark and one light)
   dotspacemacs-themes '(spacemacs-dark
                         spacemacs-light)

   ;; Set the theme for the Spaceline. Supported themes are `spacemacs',
   ;; `all-the-icons', `custom', `doom', `vim-powerline' and `vanilla'. The
   ;; first three are spaceline themes. `doom' is the doom-emacs mode-line.
   ;; `vanilla' is default Emacs mode-line. `custom' is a user defined themes,
   ;; refer to the DOCUMENTATION.org for more info on how to create your own
   ;; spaceline theme. Value can be a symbol or list with additional properties.
   ;; (default '(spacemacs :separator wave :separator-scale 1.5))
   dotspacemacs-mode-line-theme '(spacemacs :separator wave :separator-scale 1.5)

   ;; If non-nil the cursor color matches the state color in GUI Emacs.
   ;; (default t)
   dotspacemacs-colorize-cursor-according-to-state t

   ;; Default font or prioritized list of fonts. The `:size' can be specified as
   ;; a non-negative integer (pixel size), or a floating-point (point size).
   ;; Point size is recommended, because it's device independent. (default 10.0)
   ;;dotspacemacs-default-font '("Source Code Pro"
   dotspacemacs-default-font '("FantasqueSansMono Nerd Font Mono"
   ;;dotspacemacs-default-font '("Sarasa Mono SC Nerd"
                               :size 14.0
                               :weight normal
                               :width normal)

   ;; The leader key (default "SPC")
   dotspacemacs-leader-key "SPC"

   ;; The key used for Emacs commands `M-x' (after pressing on the leader key).
   ;; (default "SPC")
   dotspacemacs-emacs-command-key "SPC"

   ;; The key used for Vim Ex commands (default ":")
   dotspacemacs-ex-command-key ":"

   ;; The leader key accessible in `emacs state' and `insert state'
   ;; (default "M-m")
   dotspacemacs-emacs-leader-key "M-m"

   ;; Major mode leader key is a shortcut key which is the equivalent of
   ;; pressing `<leader> m`. Set it to `nil` to disable it. (default ",")
   dotspacemacs-major-mode-leader-key ","

   ;; Major mode leader key accessible in `emacs state' and `insert state'.
   ;; (default "C-M-m" for terminal mode, "<M-return>" for GUI mode).
   ;; Thus M-RET should work as leader key in both GUI and terminal modes.
   ;; C-M-m also should work in terminal mode, but not in GUI mode.
   dotspacemacs-major-mode-emacs-leader-key (if window-system "<M-return>" "C-M-m")

   ;; These variables control whether separate commands are bound in the GUI to
   ;; the key pairs `C-i', `TAB' and `C-m', `RET'.
   ;; Setting it to a non-nil value, allows for separate commands under `C-i'
   ;; and TAB or `C-m' and `RET'.
   ;; In the terminal, these pairs are generally indistinguishable, so this only
   ;; works in the GUI. (default nil)
   dotspacemacs-distinguish-gui-tab t

   ;; Name of the default layout (default "Default")
   dotspacemacs-default-layout-name "Default"

   ;; If non-nil the default layout name is displayed in the mode-line.
   ;; (default nil)
   dotspacemacs-display-default-layout t

   ;; If non-nil then the last auto saved layouts are resumed automatically upon
   ;; start. (default nil)
   dotspacemacs-auto-resume-layouts nil

   ;; If non-nil, auto-generate layout name when creating new layouts. Only has
   ;; effect when using the "jump to layout by number" commands. (default nil)
   dotspacemacs-auto-generate-layout-names nil

   ;; Size (in MB) above which spacemacs will prompt to open the large file
   ;; literally to avoid performance issues. Opening a file literally means that
   ;; no major mode or minor modes are active. (default is 1)
   dotspacemacs-large-file-size 1

   ;; Location where to auto-save files. Possible values are `original' to
   ;; auto-save the file in-place, `cache' to auto-save the file to another
   ;; file stored in the cache directory and `nil' to disable auto-saving.
   ;; (default 'cache)
   dotspacemacs-auto-save-file-location 'nil

   ;; Maximum number of rollback slots to keep in the cache. (default 5)
   dotspacemacs-max-rollback-slots 5

   ;; If non-nil, the paste transient-state is enabled. While enabled, after you
   ;; paste something, pressing `C-j' and `C-k' several times cycles through the
   ;; elements in the `kill-ring'. (default nil)
   dotspacemacs-enable-paste-transient-state nil

   ;; Which-key delay in seconds. The which-key buffer is the popup listing
   ;; the commands bound to the current keystroke sequence. (default 0.4)
   dotspacemacs-which-key-delay 0.4

   ;; Which-key frame position. Possible values are `right', `bottom' and
   ;; `right-then-bottom'. right-then-bottom tries to display the frame to the
   ;; right; if there is insufficient space it displays it at the bottom.
   ;; (default 'bottom)
   dotspacemacs-which-key-position 'bottom

   ;; Control where `switch-to-buffer' displays the buffer. If nil,
   ;; `switch-to-buffer' displays the buffer in the current window even if
   ;; another same-purpose window is available. If non-nil, `switch-to-buffer'
   ;; displays the buffer in a same-purpose window even if the buffer can be
   ;; displayed in the current window. (default nil)
   dotspacemacs-switch-to-buffer-prefers-purpose nil

   ;; If non-nil a progress bar is displayed when spacemacs is loading. This
   ;; may increase the boot time on some systems and emacs builds, set it to
   ;; nil to boost the loading time. (default t)
   dotspacemacs-loading-progress-bar t

   ;; If non-nil the frame is fullscreen when Emacs starts up. (default nil)
   ;; (Emacs 24.4+ only)
   dotspacemacs-fullscreen-at-startup nil

   ;; If non-nil `spacemacs/toggle-fullscreen' will not use native fullscreen.
   ;; Use to disable fullscreen animations in OSX. (default nil)
   dotspacemacs-fullscreen-use-non-native nil

   ;; If non-nil the frame is maximized when Emacs starts up.
   ;; Takes effect only if `dotspacemacs-fullscreen-at-startup' is nil.
   ;; (default nil) (Emacs 24.4+ only)
   dotspacemacs-maximized-at-startup nil

   ;; If non-nil the frame is undecorated when Emacs starts up. Combine this
   ;; variable with `dotspacemacs-maximized-at-startup' in OSX to obtain
   ;; borderless fullscreen. (default nil)
   dotspacemacs-undecorated-at-startup nil

   ;; A value from the range (0..100), in increasing opacity, which describes
   ;; the transparency level of a frame when it's active or selected.
   ;; Transparency can be toggled through `toggle-transparency'. (default 90)
   dotspacemacs-active-transparency 90

   ;; A value from the range (0..100), in increasing opacity, which describes
   ;; the transparency level of a frame when it's inactive or deselected.
   ;; Transparency can be toggled through `toggle-transparency'. (default 90)
   dotspacemacs-inactive-transparency 90

   ;; A value from the range (0..100), in increasing opacity, which describes the
   ;; transparency level of a frame background when it's active or selected. Transparency
   ;; can be toggled through `toggle-background-transparency'. (default 90)
   dotspacemacs-background-transparency 90

   ;; If non-nil show the titles of transient states. (default t)
   dotspacemacs-show-transient-state-title t

   ;; If non-nil show the color guide hint for transient state keys. (default t)
   dotspacemacs-show-transient-state-color-guide t

   ;; If non-nil unicode symbols are displayed in the mode line.
   ;; If you use Emacs as a daemon and wants unicode characters only in GUI set
   ;; the value to quoted `display-graphic-p'. (default t)
   dotspacemacs-mode-line-unicode-symbols `display-graphic-p

   ;; If non-nil smooth scrolling (native-scrolling) is enabled. Smooth
   ;; scrolling overrides the default behavior of Emacs which recenters point
   ;; when it reaches the top or bottom of the screen. (default t)
   dotspacemacs-smooth-scrolling t

   ;; Show the scroll bar while scrolling. The auto hide time can be configured
   ;; by setting this variable to a number. (default t)
   dotspacemacs-scroll-bar-while-scrolling t

   ;; Control line numbers activation.
   ;; If set to `t', `relative' or `visual' then line numbers are enabled in all
   ;; `prog-mode' and `text-mode' derivatives. If set to `relative', line
   ;; numbers are relative. If set to `visual', line numbers are also relative,
   ;; but only visual lines are counted. For example, folded lines will not be
   ;; counted and wrapped lines are counted as multiple lines.
   ;; This variable can also be set to a property list for finer control:
   ;; '(:relative nil
   ;;   :visual nil
   ;;   :disabled-for-modes dired-mode
   ;;                       doc-view-mode
   ;;                       markdown-mode
   ;;                       org-mode
   ;;                       pdf-view-mode
   ;;                       text-mode
   ;;   :size-limit-kb 1000)
   ;; When used in a plist, `visual' takes precedence over `relative'.
   ;; (default nil)
   dotspacemacs-line-numbers 'relative

   ;; Code folding method. Possible values are `evil', `origami' and `vimish'.
   ;; (default 'evil)
   dotspacemacs-folding-method 'evil

   ;; If non-nil and `dotspacemacs-activate-smartparens-mode' is also non-nil,
   ;; `smartparens-strict-mode' will be enabled in programming modes.
   ;; (default nil)
   dotspacemacs-smartparens-strict-mode nil

   ;; If non-nil smartparens-mode will be enabled in programming modes.
   ;; (default t)
   dotspacemacs-activate-smartparens-mode nil

   ;; If non-nil pressing the closing parenthesis `)' key in insert mode passes
   ;; over any automatically added closing parenthesis, bracket, quote, etc...
   ;; This can be temporary disabled by pressing `C-q' before `)'. (default nil)
   dotspacemacs-smart-closing-parenthesis nil

   ;; Select a scope to highlight delimiters. Possible values are `any',
   ;; `current', `all' or `nil'. Default is `all' (highlight any scope and
   ;; emphasis the current one). (default 'all)
   dotspacemacs-highlight-delimiters 'current

   ;; If non-nil, start an Emacs server if one is not already running.
   ;; (default nil)
   dotspacemacs-enable-server nil

   ;; Set the emacs server socket location.
   ;; If nil, uses whatever the Emacs default is, otherwise a directory path
   ;; like \"~/.emacs.d/server\". It has no effect if
   ;; `dotspacemacs-enable-server' is nil.
   ;; (default nil)
   dotspacemacs-server-socket-dir nil

   ;; If non-nil, advise quit functions to keep server open when quitting.
   ;; (default nil)
   dotspacemacs-persistent-server nil

   ;; List of search tool executable names. Spacemacs uses the first installed
   ;; tool of the list. Supported tools are `rg', `ag', `pt', `ack' and `grep'.
   ;; (default '("rg" "ag" "pt" "ack" "grep"))
   dotspacemacs-search-tools '("rg" "grep")

   ;; Format specification for setting the frame title.
   ;; %a - the `abbreviated-file-name', or `buffer-name'
   ;; %t - `projectile-project-name'
   ;; %I - `invocation-name'
   ;; %S - `system-name'
   ;; %U - contents of $USER
   ;; %b - buffer name
   ;; %f - visited file name
   ;; %F - frame name
   ;; %s - process status
   ;; %p - percent of buffer above top of window, or Top, Bot or All
   ;; %P - percent of buffer above bottom of window, perhaps plus Top, or Bot or All
   ;; %m - mode name
   ;; %n - Narrow if appropriate
   ;; %z - mnemonics of buffer, terminal, and keyboard coding systems
   ;; %Z - like %z, but including the end-of-line format
   ;; If nil then Spacemacs uses default `frame-title-format' to avoid
   ;; performance issues, instead of calculating the frame title by
   ;; `spacemacs/title-prepare' all the time.
   ;; (default "%I@%S")
   dotspacemacs-frame-title-format "%I@%S"

   ;; Format specification for setting the icon title format
   ;; (default nil - same as frame-title-format)
   dotspacemacs-icon-title-format nil

   ;; Color highlight trailing whitespace in all prog-mode and text-mode derived
   ;; modes such as c++-mode, python-mode, emacs-lisp, html-mode, rst-mode etc.
   ;; (default t)
   dotspacemacs-show-trailing-whitespace t

   ;; Delete whitespace while saving buffer. Possible values are `all'
   ;; to aggressively delete empty line and long sequences of whitespace,
   ;; `trailing' to delete only the whitespace at end of lines, `changed' to
   ;; delete only whitespace for changed lines or `nil' to disable cleanup.
   ;; (default nil)
   dotspacemacs-whitespace-cleanup 'nil

   ;; If non-nil activate `clean-aindent-mode' which tries to correct
   ;; virtual indentation of simple modes. This can interfere with mode specific
   ;; indent handling like has been reported for `go-mode'.
   ;; If it does deactivate it here.
   ;; (default t)
   dotspacemacs-use-clean-aindent-mode nil

   ;; Accept SPC as y for prompts if non-nil. (default nil)
   dotspacemacs-use-SPC-as-y nil

   ;; If non-nil shift your number row to match the entered keyboard layout
   ;; (only in insert state). Currently supported keyboard layouts are:
   ;; `qwerty-us', `qwertz-de' and `querty-ca-fr'.
   ;; New layouts can be added in `spacemacs-editing' layer.
   ;; (default nil)
   dotspacemacs-swap-number-row nil

   ;; Either nil or a number of seconds. If non-nil zone out after the specified
   ;; number of seconds. (default nil)
   dotspacemacs-zone-out-when-idle nil

   ;; Run `spacemacs/prettify-org-buffer' when
   ;; visiting README.org files of Spacemacs.
   ;; (default nil)
   dotspacemacs-pretty-docs nil

   ;; If nil the home buffer shows the full path of agenda items
   ;; and todos. If non-nil only the file name is shown.
   dotspacemacs-home-shorten-agenda-source nil

   ;; If non-nil then byte-compile some of Spacemacs files.
   dotspacemacs-byte-compile nil))

(defun dotspacemacs/user-env ()
  "Environment variables setup.
This function defines the environment variables for your Emacs session. By
default it calls `spacemacs/load-spacemacs-env' which loads the environment
variables declared in `~/.spacemacs.env' or `~/.spacemacs.d/.spacemacs.env'.
See the header of this file for more information."
  (spacemacs/load-spacemacs-env)
)

(defun dotspacemacs/user-init ()
  "Initialization for user code:
This function is called immediately after `dotspacemacs/init', before layer
configuration.
It is mostly for variables that should be set before packages are loaded.
If you are unsure, try setting them in `dotspacemacs/user-config' first."
  (setq configuration-layer-elpa-archives
        '(("melpa-cn" . "http://mirrors.bfsu.edu.cn/elpa/melpa/")
          ("org-cn" . "http://mirrors.bfsu.edu.cn/elpa/org/")
          ("gnu-cn" . "http://mirrors.bfsu.edu.cn/elpa/gnu/")
          ("non-gnu" . "https://elpa.nongnu.org/nongnu/")))
  ;;(setq default-frame-alist
  ;;      `((top . 0)
  ;;        (width . 100)
  ;;        (height . 55)))

  (setq-default evil-want-C-u-scroll t
                ;; `evil-want-C-i-jump' is set to nil to avoid `TAB' being
                ;; overlapped in terminal mode. The GUI specific `<C-i>' is used
                ;; instead.
                evil-want-C-i-jump t)

  )


(defun dotspacemacs/user-load ()
  "Library to load while dumping.
This function is called only while dumping Spacemacs configuration. You can
`require' or `load' the libraries of your choice that will be included in the
dump."
)


(defun dotspacemacs/user-config ()
  "Configuration for user code:
This function is called at the very end of Spacemacs startup, after layer
configuration.
Put your configuration code here, except for variables that should be set
before packages are loaded."
  ;;(global-tab-line-mode)
  (evil-goggles-mode)
  ;;(setq hscroll-step 1)
  (setq indent-guide-recursive t)
  (setq lsp-clients-clangd-args '("-j=8"
                                  "--background-index"
                                  "--clang-tidy=false"
                                  "--completion-style=detailed"
                                  "--header-insertion=never"
                                  "--header-insertion-decorators=0"))

  ;;(setq display-line-numbers-width-start t)
  (setq display-line-numbers-current-absolute nil)
  ;; Disables electric indent.
  ;;(electric-indent-mode -1)
  ;;(evil-define-key '(insert) company-mode-map (kbd "C-n") #'company-complete)
  (global-hl-line-mode -1)
  (add-hook 'org-mode-hook (lambda ()
                             (progn
                               (setq truncate-lines nil)
                               (org-modern-mode 1)
                               (setq display-line-numbers-width-start t)
                               (setq display-line-numbers-current-absolute nil)
                               (add-to-list 'org-preview-latex-process-alist '(xdvsvgm :progams
                                                                                       ("xelatex" "dvisvgm")
                                                                                       :discription "xdv > svg"
                                                                                       :message "you need install the programs: xelatex and dvisvgm."
                                                                                       :image-input-type "xdv"
                                                                                       :image-output-type "svg"
                                                                                       ;;:image-size-adjust (8.4 . 6.5)
                                                                                       :image-size-adjust (10 . 7.8)
                                                                                       :latex-compiler ("xelatex -interaction nonstopmode -no-pdf -output-directory %o %f")
                                                                                       :image-converter ("dvisvgm %f -e -n -b min -c %S -o %O")))
                               (setq org-preview-latex-default-process 'xdvsvgm)
                               )))
  ;;(add-hook 'verilog-mode-hook (lambda () (spacemacs/toggle-auto-completion-on)))
  ;;(setq  projectile-indexing-method 'alien
  ;;       projectile-generic-command "fd . -0 --type f --color=never"
  ;;       projectile-enable-caching t)
  ;;(setq-default evil-escape-key-sequence "jk")
  ;;(setq-default evil-escape-delay 0.2)
  ;;(spacemacs/set-leader-keys
  ;;  "pf"  'projectile-find-file
  ;;  "pF"  'projectile-find-file-dwim
  ;;  "ff"  'projectile-find-file-in-directory
  ;;  ;;"fF"  'projectile-find-file-in-directory
  ;;  )
  (setq load-path
        (cons (expand-file-name "~/dotfile/emacs/tablegen") load-path))
  (require 'tablegen-mode)
  (setq load-path
        (cons (expand-file-name "~/dotfile/emacs/tablegen") load-path))
  (require 'llvm-mode)


  ;; Org settings
  (setq-default org-download-image-dir "~/Org/assets/")
  (setq org-hide-emphasis-markers t
        ;;org-pretty-entities t
        org-auto-align-tags nil
        org-tags-column 0
        ;;org-ellipsis "…"
        org-catch-invisible-edits 'show-and-error
        org-special-ctrl-a/e t
        org-insert-heading-respect-content t)
  (setq org-startup-numerated t)
  (setq org-startup-folded 'content)
  (setq org-image-actual-width nil)
  ;;(global-set-key (kbd "C-g") '(lambda ()
  ;;                               (interactive)
  ;;                               (spacemacs/evil-search-clear-highlight)
  ;;                               (evil-ex-nohighlight)
  ;;                               (keyboard-quit)
  ;;                               ))
  (setq flycheck-navigation-minimum-level 'error)
  ;;(if (display-graphic-p)
  ;;    (spacemacs//set-monospaced-font   "Source Code Pro" "Hiragino Sans GB" 14 16))
  ;; multiple cursors

  ;;(use-package evil
  ;;  :ensure t
  ;;  :config
  ;;  )

  (use-package evil-mc
    :commands evil-mc-mode
    :init
    :config
    (evil-define-key '(normal visual) evil-mc-key-map
      (kbd "C-p") #'evil-mc-undo-last-added-cursor
      )
    (evil-define-key '(insert normal visual) evil-mc-key-map
      (kbd "C-g") (lambda ()
                    (interactive)
                    (evil-normal-state)
                    (evil-mc-undo-all-cursors)
                    )
      )
    )


  (with-eval-after-load 'ox-latex
    ;; http://orgmode.org/worg/org-faq.html#using-xelatex-for-pdf-export
    ;; latexmk runs pdflatex/xelatex (whatever is specified) multiple times
    ;; automatically to resolve the cross-references.
    ;;(setq org-latex-pdf-process '("latexmk -xelatex -quiet -shell-escape -f %f"))
    (add-to-list 'org-latex-classes
                 '("texpadcn"
                   "\\documentclass[lang=cn,11pt,a4paper]{article}
                 [NO-DEFAULT-PACKAGES]
                 [PACKAGES]
                 [EXTRA]"
                   ("\\section{%s}" . "\\section*{%s}")
                   ("\\subsection{%s}" . "\\subsection*{%s}")
                   ("\\subsubsection{%s}" . "\\subsubsection*{%s}")
                   ("\\paragraph{%s}" . "\\paragraph*{%s}")
                   ("\\subparagraph{%s}" . "\\subparagraph*{%s}")))
    ;;(setq org-latex-listings 'minted)
    ;;(add-to-list 'org-latex-packages-alist '("" "minted"))
    )

  (use-package company
    :ensure t
    :config
    (evil-define-key '(insert) company-mode-map (kbd "C-n") #'company-complete)
    )

  ;;(use-package symbol-overlay
  ;;  :ensure t
  ;;  :config
  ;;  (progn
  ;;    (define-key symbol-overlay-map (kbd "C-g") #'symbol-overlay-remove-all)
  ;;    )
  ;;  )
)


;; Do not write anything past this comment. This is where Emacs will
;; auto-generate custom variable definitions.