From 9c5642eadb3d59bee9d02d2f0305a885f1bac90b Mon Sep 17 00:00:00 2001 From: Bence Parajdi Date: Wed, 21 Aug 2024 09:19:43 +0200 Subject: [PATCH] fixes made based on the review comments --- docs/understand/texture_fetching.rst | 70 ++++++++++++++++------------ 1 file changed, 41 insertions(+), 29 deletions(-) diff --git a/docs/understand/texture_fetching.rst b/docs/understand/texture_fetching.rst index 47c4798237..1d63794b03 100644 --- a/docs/understand/texture_fetching.rst +++ b/docs/understand/texture_fetching.rst @@ -4,20 +4,22 @@ :keywords: AMD, ROCm, HIP, Texture, Texture Fetching ******************************************************************************* -Texture Fetching +Texture fetching ******************************************************************************* -`Textures <../doxygen/html/group___texture.html>`_ are more than just a buffer, that is interpreted as 1D, 2D or 3D array. Because of their legacy as a graphics functionality, textures are indexed with floating-point values. This can happen two different ways, either the index will be in the range of [0..size-1] or in [0..1]. The difference is mathematically just a division, so for the explanations on this page, we'll use the [0..size-1] indices. +`Textures <../doxygen/html/group___texture.html>`_ are more than just a buffer interpreted as a 1D, 2D, or 3D array. -Using floating-point indices isn't trivial. The two issues that come up are sampling and addressing. +As textures are associated with graphics, they are indexed using floating-point values. The index can be in the range of [0 to size-1] or in [0 to 1]. -When a texture is indexed with a fraction, the queried value is often between two or more texels (texture elements). The sampling method defines what value to return in these cases. +Depending on the index, texture sampling or texture addressing is performed, which decides the return value. -Sometimes the index is outside the bounds of the texture. This might seem unintuitive, but is useful in computer graphics for putting a texture on a surface multiple times, or just creating a visible sign of out of bounds indexing. The addressing mode defines what value to return when indexing a texture out of bounds. +**Texture sampling**: When a texture is indexed with a fraction, the queried value is often between two or more texels (texture elements). The sampling method defines what value to return in such cases. -There are several different sampling and addressing modes, the differences between which are described in the following. +**Texture addressing**: Sometimes, the index is outside the bounds of the texture. This condition might look like a problem but helps to put a texture on a surface multiple times or to create a visible sign of out-of-bounds indexing, in computer graphics. The addressing mode defines what value to return when indexing a texture out of bounds. -This image is the texture, that will be used as for the examples below. It is 2x2 texels and is indexed in the [0..1] range. +The different sampling and addressing modes are described in the following sections. + +Here is the sample texture used in this document for demonstration purposes. It is 2x2 texels and indexed in the [0 to 1] range. .. figure:: ../data/understand/textures/original.png :width: 150 @@ -29,15 +31,23 @@ This image is the texture, that will be used as for the examples below. It is 2x Texture sampling =============================================================================== -Texture sampling handles the usage of fractional indices. It is the method that describes, which near by values will be used, and how they are combined into the resulting value. +Texture sampling handles the usage of fractional indices. It is the method that describes, which nearby values will be used, and how they are combined into the resulting value. + +The various texture sampling methods are discussed in the following sections. .. _texture_fetching_nearest: Nearest point sampling ------------------------------------------------------------------------------- -In this mode the ``tex(x) = T[floor(x+0.5)]`` and similarly for 2D and 3D variants. This doesn't interpolate between neighboring values, which results in a pixelated look. +In this method: + +``tex(x) = T[floor(x+0.5)]`` -This image is the example texture stretched out to a 4x4 pixel quad, but still indexed in the [0..1] range. The in between values are the same as the values of the nearest texel. +This is also applicable for 2D and 3D variants. + +This doesn't interpolate between neighboring values, which results in a pixelated look. + +The following image shows a texture stretched to a 4x4 pixel quad but still indexed in the [0 to 1] range. The in-between values are the same as the values of the nearest texel. .. figure:: ../data/understand/textures/nearest.png :width: 300 @@ -50,17 +60,17 @@ This image is the example texture stretched out to a 4x4 pixel quad, but still i Linear filtering ------------------------------------------------------------------------------- -The linear filtering method simply does a linear interpolation between values. Linear interpolation is used to create a linear transition between two values. The formula used is ``(1-t)P1 + tP2`` where ``P1`` and ``P2`` are the values and ``t`` is within the [0..1] range. +The linear filtering method does a linear interpolation between values. Linear interpolation is used to create a linear transition between two values. The formula used is ``(1-t)P1 + tP2`` where ``P1`` and ``P2`` are the values and ``t`` is within the [0 to 1] range. In the case of texture sampling the following formulas are used: -* For one dimensional textures it is ``tex(x) = (1-α)T[i] + αT[i+1]`` -* For two dimensional textures it is ``tex(x,y) = (1-α)(1-β)T[i,j] + α(1-β)T[i+1,j] + (1-α)βT[i,j+1] + αβT[i+1,j+1]`` -* For three dimensional textures it is ``tex(x,y,z) = (1-α)(1-β)(1-γ)T[i,j,k] + α(1-β)(1-γ)T[i+1,j,k] + (1-α)β(1-γ)T[i,j+1,k] + αβ(1-γ)T[i+1,j+1,k] + (1-α)(1-β)γT[i,j,k+1] + α(1-β)γT[i+1,j,k+1] + (1-α)βγT[i,j+1,k+1] + αβγT[i+1,j+1,k+1]`` +* For one dimensional textures: ``tex(x) = (1-α)T[i] + αT[i+1]`` +* For two dimensional textures: ``tex(x,y) = (1-α)(1-β)T[i,j] + α(1-β)T[i+1,j] + (1-α)βT[i,j+1] + αβT[i+1,j+1]`` +* For three dimensional textures: ``tex(x,y,z) = (1-α)(1-β)(1-γ)T[i,j,k] + α(1-β)(1-γ)T[i+1,j,k] + (1-α)β(1-γ)T[i,j+1,k] + αβ(1-γ)T[i+1,j+1,k] + (1-α)(1-β)γT[i,j,k+1] + α(1-β)γT[i+1,j,k+1] + (1-α)βγT[i,j+1,k+1] + αβγT[i+1,j+1,k+1]`` -Where ``x, y, z`` are the floating-point indices, ``i, j, k`` are the integer indices and ``α, β, γ`` values represent how far along the sampled point is on the three axes. These values are calculated by these formulas: ``i = floor(x')``, ``α = frac(x')``, ``x' = x - 0.5``, ``j = floor(y')``, ``β = frac(y')``, ``y' = y - 0.5``, ``k = floor(z')``, ``γ = frac(z')`` and ``z' = z - 0.5`` +Where x, y, and, z are the floating-point indices. i, j, and, k are the integer indices and, α, β, and, γ values represent how far along the sampled point is on the three axes. These values are calculated by these formulas: ``i = floor(x')``, ``α = frac(x')``, ``x' = x - 0.5``, ``j = floor(y')``, ``β = frac(y')``, ``y' = y - 0.5``, ``k = floor(z')``, ``γ = frac(z')`` and ``z' = z - 0.5`` -This image is the example texture stretched out to a 4x4 pixel quad, but still indexed in the [0..1] range. The in between values are interpolated between the neighboring texels. +This following image shows a texture stretched out to a 4x4 pixel quad, but still indexed in the [0 to 1] range. The in-between values are interpolated between the neighboring texels. .. figure:: ../data/understand/textures/linear.png :width: 300 @@ -72,68 +82,70 @@ This image is the example texture stretched out to a 4x4 pixel quad, but still i Texture addressing =============================================================================== -Texture addressing mode handles, when the index is out of bounds of the texture. It describes which values of the texture (or a preset value) to use, when the index is out of bounds. +Texture addressing mode handles the index that is out of bounds of the texture. This mode describes which values of the texture or a preset value to use when the index is out of bounds. + +The following sections describe the various texture addressing methods. .. _texture_fetching_border: Address mode border ------------------------------------------------------------------------------- -This is probably the simplest address mode. When indexing out of bounds, the texture fetching returns a border value. This has to be set before texture fetching. +In this method, the texture fetching returns a border value when indexing out of bounds. This must be set before texture fetching. -This image is the example texture on a 4x4 pixel quad indexed in the [0..3] range. The out of bounds values are the border color, which is yellow. +The following image shows the texture on a 4x4 pixel quad, indexed in the [0 to 3] range. The out-of-bounds values are the border color, which is yellow. .. figure:: ../data/understand/textures/border.png :width: 300 :alt: Texture with yellow border color :align: center - Texture with yellow border color. The purple lines are not part of the texture, only denote the edge, where the addressing begins. + The purple lines are not part of the texture, only denote the edge, where the addressing begins. .. _texture_fetching_wrap: Address mode wrap ------------------------------------------------------------------------------- -This addressing mode is very simple. Mathematically it uses modulo of the index. +In this addressing mode, the modulo of the index is calculated: ``tex(x) = T[x mod (size-1)]`` This creates a repeating image effect. -This image is the example texture on a 4x4 pixel quad indexed in the [0..3] range. The out of bounds values are repeating the original texture. +The following image shows the texture on a 4x4 pixel quad, indexed in the [0 to 3] range. The out-of-bounds values are repeating the original texture. .. figure:: ../data/understand/textures/wrap.png :width: 300 :alt: Texture with wrap addressing :align: center - Texture with wrap addressing. The purple lines are not part of the texture, only denote the edge, where the addressing begins. + The purple lines are not part of the texture, only denote the edge, where the addressing begins. .. _texture_fetching_mirror: Address mode mirror ------------------------------------------------------------------------------- -Similar to wrapping mirror mode also creates a repeating image, but this time neighboring instances are mirrored. +Similar to the wrap mode, this mode also creates a repeating image, but by mirroring the neighboring instances. -This image is the example texture on a 4x4 pixel quad indexed in the [0..3] range. The out of bounds values are repeating the original texture, but mirrored. +The following image shows the texture on a 4x4 pixel quad, indexed in the [0 to 3] range. The out-of-bounds values are repeating the original texture, but mirrored. .. figure:: ../data/understand/textures/mirror.png :width: 300 :alt: Texture with mirror addressing :align: center - Texture with mirror addressing. The purple lines are not part of the texture, only denote the edge, where the addressing begins. + The purple lines are not part of the texture, only denote the edge, where the addressing begins. .. _texture_fetching_clamp: Address mode clamp ------------------------------------------------------------------------------- -This mode simply clamps the index to be between [0..size-1]. This means that when indexing out of bounds, the values on the edge of the texture will repeat. +This mode clamps the index between [0 to size-1]. Due to this, when indexing out-of-bounds, the values on the edge of the texture repeat. -This image is the example texture on a 4x4 pixel quad indexed in the [0..3] range. The out of bounds values are repeating the values at the edge of the texture. +The following image shows the texture on a 4x4 pixel quad, indexed in the [0 to 3] range. The out-of-bounds values are repeating the values at the edge of the texture. .. figure:: ../data/understand/textures/clamp.png :width: 300 :alt: Texture with clamp addressing :align: center - Texture with clamp addressing. The purple lines are not part of the texture, only denote the edge, where the addressing begins. + The purple lines are not part of the texture, only denote the edge, where the addressing begins.