V3.3.1

• Minor bug fixes
• Allow using the disabled state to pause charging rather than sleep, may fix issues using solar PV divert with Zoe's & MG ZS EV.

Note: currently disable state does not work for timed charge, this will be supported soon

---

Attached Pre-compiled Firmware

• firmware.bin Pre-compiled for Huzzah32 (standard WiFi hardware)
• esp32-gateway-e.bin Pre-compiled for ESP32 Gateway rev E (Ethernet module)

For other hardware builds see platformio.ini

Updating Firmware

Firmware can be updated via the web interface.

If the web interface cannot be loaded. the firmware can be loaded via a USB to serial programmer see instructions in Readme.md.

V3.3.0

• Improved Emoncms service UI feedback #64
• Fix display of Emoncms connected
• Make WiFi RSSI available as status so it can be logged to Emoncms / MQTT 7f29fa8
• Typo UI fixes #100 #98
• Enable debug via web UI #45

---

Attached Pre-compiled Firmware

• firmware.bin Pre-compiled for Huzzah32 (standard WiFi hardware)
• esp32-gateway-e.bin Pre-compiled for ESP32 Gateway rev E (Ethernet module)

For other hardware builds see platformio.ini

Updating Firmware

Firmware can be updated via the web interface.

If the web interface cannot be loaded. the firmware can be loaded via a USB to serial programmer see instructions in Readme.md.

V3.2.0

• Beta Tesla API support (no GUI support yet) #67

• EEPROM config is now stored in JSON format

• Realtime VRMS via MQTT for improve solar PV divert calculation. e.g from emonPi emon/emonpi/vrms

  • Note: this feature will in the future be used to improve the OpenEVSE energy calculation, this will require a OpenEVSE controller firmware update (as yet unreleased)

• Significant update to solar PV divert functionality: Issue #54 PR #76

  • Eco Mode is now pervasive between charging sessions
  • PV divert ("Eco Mode") will now pause charging once solar PV / Grid IE drops below the minimum current (6A) and will resume when more power is available.
  • Charge current calculation is now processed via a smoothing algorithm to avoid any stopping/starting charging unnecessarily
  • Improved user display to communicate charging state e.g "Charging from Solar", "Waiting for Solar" etc
  • Timer charge functions as an overnight boost timer'. If EcoMode is left enabled and a timer is set e.g overnight off peak period, the EV will charge at full current for the duration of the timed charge.
  • Enable 'advanced' mode to adjust smoothing and minimum charge time settings:
    

Pre-compiled FW for Huzzah32 attached below. For other hardware builds see platformio.ini for supported hardware.

Examples of the new solar PV divert in action:

---

Attached Pre-compiled Firmware

• firmware.bin Pre-compiled for Huzzah32 (standard WiFi hardware)
• esp32-gateway-e.bin Pre-compiled for ESP32 Gateway rev E (Ethernet module)

For other hardware builds see platformio.ini

Updating Firmware

If the web interface cannot be loaded. the firmware can be loaded via a USB to serial programmer see instructions in Readme.md.

V3.1.0

• NTP & time zone support #56
• Secure MQTTS connection support: currently supporting certificates: AWS, Emoncms.org, data.openevse.com, adafuit #57
• WiFi stability fixes #63
• WiFi AP setup fix #66

Pre-compiled FW for Huzzah32 attached below. For other hardware builds see platformio.ini for supported hardware.

V3.0.3

• Support RAPI 5.0.0
• Build using IDF to fix hostname issue
• Add back websockets support
• Handle over current error in UI

V3.0.2 - Beta

• Emoncms post HTTP/ HTTPS drop down option (default HTTPS)
• Fix sending empty RAPI commnds #48
• Add Heltec ESP32 board #46
• Stability fixes
• Display hostname during startup
• Fix GPI0 to force WiFi AP for Huzzah32 #34

V3.0.1 - Beta

• Fix memory leak when posting to Emoncms via HTTP / HTTPS
• MQTT discovery
• Unique strings
• Fix HTTP posting to emonPi (Emoncms V10) incorrect status message
• Improve WiFi scan interference
• Support Ethernet connection via ESP-gateway (rev E)

V3.0.0 - beta

• First beta release

To be installed on some test systems