2014-07-21-xctestcase.md

title	author	category	excerpt	revisions	status
XCTestCase /<br/>XCTestExpectation /<br/> measureBlock()	Mattt	Xcode	This week, we'll take a look at `XCTest`, the testing framework built into Xcode, as well as the exciting new additions in Xcode 6: `XCTestExpectation` and performance tests.	2015-04-07 Added note about location of call to `fulfill()`; new Objective-C examples	swift reviewed 1.2 June 25, 2015

Although iOS 8 and Swift has garnered the lion's share of attention of the WWDC 2014 announcements, the additions and improvements to testing in Xcode 6 may end up making some of the most profound impact in the long-term.

This week, we'll take a look at XCTest, the testing framework built into Xcode, as well as the exciting new additions in Xcode 6: XCTestExpectation and performance tests.

---

Most Xcode project templates now support testing out-of-the-box. For example, when a new iOS app is created in Xcode with ⇧⌘N, the resulting project file will be configured with two top-level groups (in addition to the "Products" group): "AppName" & "AppNameTests". The project's auto-generated scheme enables the shortcut ⌘R to build and run the executable target, and ⌘U to build and run the test target.

Within the test target is a single file, named "AppNameTests", which contains an example XCTestCase class, complete with boilerplate setUp & tearDown methods, as well as an example functional and performance test cases.

XCTestCase

Xcode unit tests are contained within an XCTestCase subclass. By convention, each XCTestCase subclass encapsulates a particular set of concerns, such as a feature, use case, or flow of an application.

Dividing up tests logically across a manageable number of test cases makes a huge difference as codebases grow and evolve.

setUp & tearDown

setUp is called before each test in an XCTestCase is run, and when that test finishes running, tearDown is called:

class Tests: XCTestCase {
    override func setUp() {
        super.setUp()
        // Put setup code here. This method is called before the invocation of each test method in the class.
    }

    override func tearDown() {
        // Put teardown code here. This method is called after the invocation of each test method in the class.
        super.tearDown()
    }
}

@interface Tests : XCTestCase

@property NSCalendar *calendar;
@property NSLocale *locale;

@end

@implementation Tests

- (void)setUp {
    [super setUp];
    // Put setup code here. This method is called before the invocation of each test method in the class.
}

- (void)tearDown {
    // Put teardown code here. This method is called after the invocation of each test method in the class.
    [super tearDown];
}

@end

These methods are useful for creating objects common to all of the tests for a test case:

var calendar: NSCalendar?
var locale: NSLocale?

override func setUp() {
    super.setUp()

    calendar = NSCalendar(identifier: NSCalendarIdentifierGregorian)
    locale = NSLocale(localeIdentifier: "en_US")
}

- (void)setUp {
    [super setUp];

    self.calendar = [NSCalendar calendarWithIdentifier:NSCalendarIdentifierGregorian];
    self.locale = [NSLocale localeWithLocaleIdentifier:@"en_US"];
}

Since XCTestCase is not intended to be initialized directly from within a test case definition, shared properties initialized in setUp are declared as optional vars in Swift. As such, it's often much simpler to forgo setUp and assign default values instead:

var calendar: NSCalendar = NSCalendar(identifier: NSGregorianCalendar)
var locale: NSLocale = NSLocale(localeIdentifier: "en_US")

Functional Testing

Each method in a test case with a name that begins with "test" is recognized as a test, and will evaluate any assertions within that function to determine whether it passed or failed.

For example, the function testOnePlusOneEqualsTwo will pass if 1 + 1 is equal to 2:

func testOnePlusOneEqualsTwo() {
    XCTAssertEqual(1 + 1, 2, "one plus one should equal two")
}

- (void)testOnePlusOneEqualsTwo {
    XCTAssertEqual(1 + 1, 2, "one plus one should equal two");
}

All of the XCTest Assertions You Really Need To Know

XCTest comes with a number of built-in assertions, but one could narrow them down to just a few essentials:

Fundamental Test

To be entirely reductionist, all of the XCTest assertions come down to a single, base assertion:

XCTAssert(expression, format...)

XCTAssert(expression, format...);

If the expression evaluates to true, the test passes. Otherwise, the test fails, printing the formatted message.

Although a developer could get away with only using XCTAssert, the following helper assertions provide some useful semantics to help clarify what exactly is being tested. When possible, use the most specific assertion available, falling back to XCTAssert only in cases where it better expresses the intent.

Boolean Tests

For Bool values, or simple boolean expressions, use XCTAssertTrue & XCTAssertFalse:

XCTAssertTrue(expression, format...)
XCTAssertFalse(expression, format...)

XCTAssertTrue(expression, format...);
XCTAssertFalse(expression, format...);

XCTAssert is equivalent to XCTAssertTrue.

Equality Tests

When testing whether two values are equal, use XCTAssert[Not]Equal for scalar values and XCTAssert[Not]EqualObjects for objects:

XCTAssertEqual(expression1, expression2, format...)
XCTAssertNotEqual(expression1, expression2, format...)

XCTAssertEqual(expression1, expression2, format...);
XCTAssertNotEqual(expression1, expression2, format...);

XCTAssertEqualObjects(expression1, expression2, format...);
XCTAssertNotEqualObjects(expression1, expression2, format...);

XCTAssert[Not]EqualObjects is not necessary in Swift, since there is no distinction between scalars and objects.

When specifically testing whether two Double, Float, or other floating-point values are equal, use XCTAssert[Not]EqualWithAccuracy, to account for any issues with floating point accuracy:

XCTAssertEqualWithAccuracy(expression1, expression2, accuracy, format...)
XCTAssertNotEqualWithAccuracy(expression1, expression2, accuracy, format...)

XCTAssertEqualWithAccuracy(expression1, expression2, accuracy, format...);
XCTAssertNotEqualWithAccuracy(expression1, expression2, accuracy, format...);

In addition to the aforementioned equality assertions, there are XCTAssertGreaterThan[OrEqual] & XCTAssertLessThan[OrEqual], which supplement == with >, >=, <, & <= equivalents for comparable values.

Nil Tests

Use XCTAssert[Not]Nil to assert the existence (or non-existence) of a given value:

XCTAssertNil(expression, format...)
XCTAssertNotNil(expression, format...)

XCTAssertNil(expression, format...);
XCTAssertNotNil(expression, format...);

Unconditional Failure

Finally, the XCTFail assertion will always fail:

XCTFail(format...)

XCTFail(format...);

XCTFail is most commonly used to denote a placeholder for a test that should be made to pass. It is also useful for handling error cases already accounted by other flow control structures, such as the else clause of an if statement testing for success.

Performance Testing

New in Xcode 6 is the ability to benchmark the performance of code:

func testDateFormatterPerformance() {
    let dateFormatter = NSDateFormatter()
    dateFormatter.dateStyle = .LongStyle
    dateFormatter.timeStyle = .ShortStyle

    let date = NSDate()

    measureBlock() {
        let string = dateFormatter.stringFromDate(date)
    }
}

- (void)testDateFormatterPerformance {
    NSDateFormatter *dateFormatter = [[NSDateFormatter alloc] init];
    dateFormatter.dateStyle = NSDateFormatterLongStyle;
    dateFormatter.timeStyle = NSDateFormatterShortStyle;

    NSDate *date = [NSDate date];

    [self measureBlock:^{
        NSString *string = [dateFormatter stringFromDate:date];
    }];
}

The test output shows the average execution time for the measured block as well as individual run times and standard deviation:

Test Case '-[_Tests testDateFormatterPerformance]' started.
<unknown>:0: Test Case '-[_Tests testDateFormatterPerformance]' measured [Time, seconds] average: 0.000, relative standard deviation: 242.006%, values: [0.000441, 0.000014, 0.000011, 0.000010, 0.000010, 0.000010, 0.000010, 0.000010, 0.000010, 0.000010], performanceMetricID:com.apple.XCTPerformanceMetric_WallClockTime, baselineName: "", baselineAverage: , maxPercentRegression: 10.000%, maxPercentRelativeStandardDeviation: 10.000%, maxRegression: 0.100, maxStandardDeviation: 0.100
Test Case '-[_Tests testDateFormatterPerformance]' passed (0.274 seconds).

Performance tests help establish a baseline of performance for hot code paths. Sprinkle them into your test cases to ensure that significant algorithms and procedures remain performant as time goes on.

XCTestExpectation

Perhaps the most exciting feature added in Xcode 6 is built-in support for asynchronous testing, with the XCTestExpectation class. Now, tests can wait for a specified length of time for certain conditions to be satisfied, without resorting to complicated GCD incantations.

To make a test asynchronous, first create an expectation with expectationWithDescription:

let expectation = expectationWithDescription("...")

XCTestExpectation *expectation = [self expectationWithDescription:@"..."];

Then, at the bottom of the method, add the waitForExpectationsWithTimeout method, specifying a timeout, and optionally a handler to execute when either the conditions of your test are met or the timeout is reached (a timeout is automatically treated as a failed test):

waitForExpectationsWithTimeout(10) { error in
    <#...#>
}

[self waitForExpectationsWithTimeout:10 handler:^(NSError *error) {
    <#...#>
}];

Now, the only remaining step is to fulfill that expecation in the relevant callback of the asynchronous method being tested:

expectation.fulfill()

[expectation fulfill];

Always call fulfill() at the end of the asynchronous callback—fulfilling the expectation earlier can set up a race condition where the run loop may exit before completing the test. If the test has more than one expectation, it will not pass unless each expectation executes fulfill() within the timeout specified in waitForExpectationsWithTimeout().

Here's an example of how the response of an asynchronous networking request can be tested with the new XCTestExpectation APIs:

func testAsynchronousURLConnection() {
    let URL = NSURL(string: "https://nshipster.com/")!
    let expectation = expectationWithDescription("GET \(URL)")

    let session = NSURLSession.sharedSession()
    let task = session.dataTaskWithURL(URL) { data, response, error in
        XCTAssertNotNil(data, "data should not be nil")
        XCTAssertNil(error, "error should be nil")

        if let HTTPResponse = response as? NSHTTPURLResponse,
            responseURL = HTTPResponse.URL,
            MIMEType = HTTPResponse.MIMEType
        {
            XCTAssertEqual(responseURL.absoluteString, URL.absoluteString, "HTTP response URL should be equal to original URL")
            XCTAssertEqual(HTTPResponse.statusCode, 200, "HTTP response status code should be 200")
            XCTAssertEqual(MIMEType, "text/html", "HTTP response content type should be text/html")
        } else {
            XCTFail("Response was not NSHTTPURLResponse")
        }

        expectation.fulfill()
    }

    task.resume()

    waitForExpectationsWithTimeout(task.originalRequest!.timeoutInterval) { error in
        if let error = error {
            print("Error: \(error.localizedDescription)")
        }
        task.cancel()
    }
}

- (void)testAsynchronousURLConnection {
    NSURL *URL = [NSURL URLWithString:@"https://nshipster.com/"];
    NSString *description = [NSString stringWithFormat:@"GET %@", URL];
    XCTestExpectation *expectation = [self expectationWithDescription:description];

    NSURLSession *session = [NSURLSession sharedSession];
    NSURLSessionDataTask *task = [session dataTaskWithURL:URL
                                        completionHandler:^(NSData *data, NSURLResponse *response, NSError *error)
    {
        XCTAssertNotNil(data, "data should not be nil");
        XCTAssertNil(error, "error should be nil");

        if ([response isKindOfClass:[NSHTTPURLResponse class]]) {
            NSHTTPURLResponse *httpResponse = (NSHTTPURLResponse *)response;
            XCTAssertEqual(httpResponse.statusCode, 200, @"HTTP response status code should be 200");
            XCTAssertEqualObjects(httpResponse.URL.absoluteString, URL.absoluteString, @"HTTP response URL should be equal to original URL");
            XCTAssertEqualObjects(httpResponse.MIMEType, @"text/html", @"HTTP response content type should be text/html");
        } else {
            XCTFail(@"Response was not NSHTTPURLResponse");
        }

        [expectation fulfill];
    }];

    [task resume];

    [self waitForExpectationsWithTimeout:task.originalRequest.timeoutInterval handler:^(NSError *error) {
        if (error != nil) {
            NSLog(@"Error: %@", error.localizedDescription);
        }
        [task cancel];
    }];
}

Mocking in Swift

With first-class support for asynchronous testing, Xcode 6 seems to have fulfilled all of the needs of a modern test-driven developer. Well, perhaps save for one: mocking.

Mocking can be a useful technique for isolating and controlling behavior in systems that, for reasons of complexity, non-determinism, or performance constraints, do not usually lend themselves to testing. Examples include simulating specific networking interactions, intensive database queries, or inducing states that might emerge under a particular race condition.

There are a couple of open source libraries for creating mock objects and stubbing method calls, but these libraries largely rely on Objective-C runtime manipulation, something that is not currently possible with Swift.

However, this may not actually be necessary in Swift, due to its less-constrained syntax.

In Swift, classes can be declared within the definition of a function, allowing for mock objects to be extremely self-contained. Just declare a mock inner-class, override and necessary methods:

func testFetchRequestWithMockedManagedObjectContext() {
    class MockNSManagedObjectContext: NSManagedObjectContext {
        override func executeFetchRequest(request: NSFetchRequest!, error: AutoreleasingUnsafePointer<NSError?>) -> [AnyObject]! {
            return [["name": "Johnny Appleseed", "email": "[email protected]"]]
        }
    }

    let mockContext = MockNSManagedObjectContext()
    let fetchRequest = NSFetchRequest(entityName: "User")
    fetchRequest.predicate = NSPredicate(format: "email ENDSWITH[cd] %@", "@apple.com")
    fetchRequest.resultType = .DictionaryResultType

    var error: NSError?
    let results = mockContext.executeFetchRequest(fetchRequest, error: &error)

    XCTAssertNil(error, "error should be nil")
    XCTAssertEqual(results.count, 1, "fetch request should only return 1 result")

    let result = results[0] as [String: String]
    XCTAssertEqual(result["name"] as String, "Johnny Appleseed", "name should be Johnny Appleseed")
    XCTAssertEqual(result["email"] as String, "[email protected]", "email should be [email protected]")
}

---

With Xcode 6, we've finally arrived: the built-in testing tools are now good enough to use on their own. That is to say, there are no particularly compelling reasons to use any additional abstractions in order to provide acceptable test coverage for the vast majority apps and libraries. Except in extreme cases that require extensive stubbing, mocking, or other exotic test constructs, XCTest assertions, expectations, and performance measurements should be sufficient.

But no matter how good the testing tools have become, they're only good as how you actually use them.

If you're new to testing on iOS or OS X, start by adding a few assertions to that automatically-generated test case file and hitting ⌘U. You might be surprised at how easy and—dare I say—enjoyable you'll find the whole experience.