From 3431ba1a1b8865796fa618b8a0c4a257c842c25f Mon Sep 17 00:00:00 2001 From: s-martin Date: Fri, 17 May 2024 19:40:26 +0200 Subject: [PATCH] document working cards for rc522 (#2374) --- components/rfid-reader/RC522/README.md | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/components/rfid-reader/RC522/README.md b/components/rfid-reader/RC522/README.md index 156ce5a09..b84479a07 100644 --- a/components/rfid-reader/RC522/README.md +++ b/components/rfid-reader/RC522/README.md @@ -1,4 +1,6 @@ -# How to setup the RC522 RFID reader +# RC522 Reader + +## How to setup the RC522 RFID reader 1. **You can use the `setup_rc522.sh` script (recommended)** or follow the manual steps: @@ -15,3 +17,7 @@ - `sudo systemctl restart phoniebox-rfid-reader.service` Be aware that unlike a few other installations with this card reader the phoniebox requires the IRQ pin to be connected (on the raspberry pi and zero normaly to GPIO 24 or PIN 18). + +## Working cards/tags + +Cards or tags must support 13.56 MHz. Currently, only cards/tags of the type "NXP Mifare Classic 1k(S50)", "NXP Mifare Classic 4k(S70)" and "NXP Mifare Ultralight (C)" can be used. Type "NXP Mifare NTAG2xx" will not work!