- Latest version 0.4
DualSense Control [DualSenseCTL] is a tool for controlling Sony PlayStation 5 DualSense controllers on Linux.
Usage: dualsensectl [--option] [command] [ARGUMENT/S] ([command]) [PARAMETER/S]
Options:
-l --list List available devices [xx:xx:xx:xx:xx:xx] (USB/Bluetooth)
-d --device [DEVICE] Specify which device to use [xx:xx:xx:xx:xx:xx] (USB/Bluetooth) and show help message
-w --wait Wait for shell command to complete (Monitor only)
-h --help Show this help message and exit
-v --version Show version and exit
Commands:
power-off Turn off the controller (Bluetooth only)
battery Get the controller battery level and charging/discharging information
info Get the controller firmware information
lightbar [STATE] Enable [ON] or disable [OFF] lightbar
lightbar [RED] [GREEN] [BLUE] [BRIGHTNESS] Set lightbar color and brightness [0-255] [0-255] [0-255] [0-255]
player-leds [NUMBER] Set player LEDs [1-5] or disabled [0]
microphone [STATE] Enable [ON] or disable [OFF] microphone
microphone-led [STATE] Enable [ON] or disable [OFF] microphone orange LED
speaker [STATE] Toggle to '[INTERNAL] speaker', [HEADPHONE], [MONOHEADPHONE] or [BOTH] outputs
volume [VOLUME] Set audio volume [0-255] of internal speaker and headphone
attenuation [RUMBLE] [TRIGGER] Set the attenuation [0-7] [0-7] of rumble/haptic motors and trigger vibration
trigger [TRIGGER] off Remove all trigger [LEFT], [RIGHT] or [BOTH] effects
trigger [TRIGGER] feedback [POSITION] [STRENGTH] Set trigger(s) [LEFT], [RIGHT] or [BOTH] 'feedback'/'resistance' starting at position with a defined strength
trigger [TRIGGER] weapon [START] [STOP] [STRENGTH] Emulate trigger(s) [LEFT], [RIGHT] or [BOTH] as weapon like 'gun trigger'
trigger [TRIGGER] bow [START] [STOP] [STRENGTH] [SNAP_FORCE] Emulate trigger(s) [LEFT], [RIGHT] or [BOTH] as weapon like 'bow'
trigger [TRIGGER] galloping [START] [STOP] [FIRST_FOOT] [SECOND_FOOT] [FREQUENCY] Emulate trigger [LEFT], [RIGHT] or [BOTH] 'galloping'
trigger [TRIGGER] machine [START] [STOP] [STRENGTH_A] [STRENGTH_B] [FREQUENCY] [PERIOD] Switch trigger [LEFT], [RIGHT] or [BOTH] vibration between to strength at a specified period
trigger [TRIGGER] vibration [POSITION] [AMPLITUDE] [FREQUENCY] Vibrates trigger [LEFT], [RIGHT] or [BOTH] motor arm around specified position
trigger [TRIGGER] feedback-raw [STRENGTH(10)] Set trigger [LEFT], [RIGHT] or [BOTH] 'feedback'/'resistance' starting using array of strength (Requires 10 parameters)
trigger [TRIGGER] vibration-raw [AMPLITUDE(10)] [FREQUENCY] Vibrates trigger [LEFT], [RIGHT] or [BOTH] motor arm at position and strength specified by an array of amplitude (Requires 10 parameters)
trigger [TRIGGER] mode [PARAMETERS(1-9)] Set the trigger [LEFT], [RIGHT] or [BOTH] mode with parameters [1-9]
monitor [add 'command'] / [remove 'command'] Run Monitor shell [add/remove 'command'] on add/remove events
./
sudo make && sudo make install all
./
sudo make uninstall all
- Arch Linux - AUR: [dualsensectl] (https://aur.archlinux.org/packages/dualsensectl) -- Not Updated
- Arch Linux - AUR: [dualsensectl-git] (https://aur.archlinux.org/packages/dualsensectl-git/) -- GIT version
- Debian/Ubuntu - DEB: [dualsensectl] ---
- openSUSE - RPM: [dualsensectl] (https://build.opensuse.org/package/show/home:MartinVonReichenberg:hardware/dualsensectl)
- Fedora - RPM: [dualsensectl] (https://copr.fedorainfracloud.org/coprs/birkch/dualsensectl/)
- Mageia - RPM: ---
- gcc/musl | systemd-dev/systemd-devel
- gcc | dbus | systemd | systemd-libs
- gcc | dbus | libdbus-1-dev | libhidapi-dev | libudev-dev
- gcc-devel | gcc-c++ | dbus-1-devel | libdbus-c++-devel | libhidapi-devel | libudev-devel
- gcc | gcc-c++ | dbus-devel | hidapi-devel | systemd-devel | systemd-udev
- gcc | gcc-c++ | lib64dbus-devel | lib64dbus-c++-devel | lib64hidapi-devel | lib64udev-devel
- gcc | dbus | systemd
- gcc/musl | dbus | hidapi/hidapi-hidraw | udev/libudev
- gcc | dbus | dbus-c++ | systemd-libs | hidapi | libudev0-shim
- gcc | dbus | libdbus-1-3 | libhidapi-hidraw0 | libudev0 | libudev1
- gcc | gcc-c++ | dbus-1 | libhidapi-hidraw0 | libhidapi-libusb0 | udev | libudev1
- gcc | gcc-c++ | dbus | systemd | hidapi | libhid | libusb1 | systemd-udev
- gcc | gcc-c++ | lib64dbus1_3 | lib64hidapi0 | lib64udev1
- gcc-libs | dbus | systemd
Also installed by Steam, so you may already have it configured. If not, create file /etc/udev/rules.d/70-dualsensectl.rules:
# PS5 DualSense controller over USB hidraw
KERNEL=="hidraw*", ATTRS{idVendor}=="054c", ATTRS{idProduct}=="0ce6", MODE="0660", TAG+="uaccess"
# PS5 DualSense controller over bluetooth hidraw
KERNEL=="hidraw*", KERNELS=="*054C:0CE6*", MODE="0660", TAG+="uaccess"