Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

[BUG] Bluetooth device not discovered by LE settings on WeTek Play2 #8900

Open
i3laze opened this issue May 17, 2024 · 5 comments
Open

[BUG] Bluetooth device not discovered by LE settings on WeTek Play2 #8900

i3laze opened this issue May 17, 2024 · 5 comments

Comments

@i3laze
Copy link

i3laze commented May 17, 2024

Describe the bug

Original Bluetooth module doesn't work on stock 12.0 WetekPlay2 firmware:
https://releases.libreelec.tv/LibreELEC-AMLGX.aarch64-12.0.0-wetek-play2.img.gz

"No Bluetooth device found"

How to reproduce

Steps to reproduce the behavior:

  1. Go to 'Kodi Settings - LibreELEC - Services'.
  2. Verify Bluetooth service is Enabled.
  3. Go to 'Kodi Settings - LibreELEC - Bluetooth.'
  4. See error "No Bluetooth device found"

Information

Log file

PasteKodi: https://paste.libreelec.tv/smooth-cod.log
dmesg output: https://paste.libreelec.tv/prompt-grouper.log

Context

Bluetooth original module inside the unit was working fine on latest CoreELEC 9.2.8 before LE12 clean install.
@i3laze
Copy link
Author

i3laze commented May 17, 2024 •
edited
Loading

While issue seems a clone of Realtek firmware missing #8853

It goes without saying one expect native Bluetooth dongle to be supported by native Wetek Play 2 image.
Thanks for bringing new life to S905H though!

Didn't try LE11 WeTek Play2 build yet.

@heitbaum
Copy link
Contributor

Please test following #8853 (comment) if it works then this will be closed with #8853

@chewitt
Copy link
Member

chewitt commented May 17, 2024 •
edited
Loading

LE includes the firmware and the device/driver is probed and working from the console:

WP2:~ # dmesg | grep -i blue
[    9.922582] Bluetooth: Core ver 2.22
[    9.923065] NET: Registered PF_BLUETOOTH protocol family
[    9.923132] Bluetooth: HCI device and connection manager initialized
[    9.923804] Bluetooth: HCI socket layer initialized
[    9.923925] Bluetooth: L2CAP socket layer initialized
[    9.924676] Bluetooth: SCO socket layer initialized
[   10.087105] Bluetooth: HCI UART driver ver 2.3
[   10.087145] Bluetooth: HCI UART protocol H4 registered
[   10.087354] Bluetooth: HCI UART protocol Three-wire (H5) registered
[   10.087795] Bluetooth: HCI UART protocol Broadcom registered
[   10.087900] Bluetooth: HCI UART protocol QCA registered
[   10.469738] Bluetooth: hci0: BCM: chip id 62
[   10.472064] Bluetooth: hci0: BCM: features 0x0f
[   10.495191] Bluetooth: hci0: BCM4330B1
[   10.495236] Bluetooth: hci0: BCM4330B1 (002.001.003) build 0000
[   10.522116] Bluetooth: hci0: BCM4330B1 'brcm/BCM4330B1.hcd' Patch
[   16.114702] Bluetooth: hci0: BCM: features 0x0f
[   16.137743] Bluetooth: hci0: Win8 Tablet Semco SWB-B42G - BCM4330B1 37.4 MHz Class 2 NoExtLNA
[   16.137764] Bluetooth: hci0: BCM4330B1 (002.001.003) build 1316
[   16.250556] Bluetooth: MGMT ver 1.22
WP2:~ # bluetoothctl show
Controller 43:30:A0:00:1F:AC (public)
	Manufacturer: 0x000f (15)
	Version: 0x06 (6)
	Name: WP2
	Alias: WP2
	Class: 0x000c0000 (786432)
	Powered: yes
	PowerState: on
	Discoverable: no
	DiscoverableTimeout: 0x000000b4 (180)
	Pairable: yes
	UUID: A/V Remote Control        (0000110e-0000-1000-8000-00805f9b34fb)
	UUID: Audio Source              (0000110a-0000-1000-8000-00805f9b34fb)
	UUID: PnP Information           (00001200-0000-1000-8000-00805f9b34fb)
	UUID: Audio Sink                (0000110b-0000-1000-8000-00805f9b34fb)
	UUID: A/V Remote Control Target (0000110c-0000-1000-8000-00805f9b34fb)
	UUID: Generic Access Profile    (00001800-0000-1000-8000-00805f9b34fb)
	UUID: Generic Attribute Profile (00001801-0000-1000-8000-00805f9b34fb)
	UUID: Device Information        (0000180a-0000-1000-8000-00805f9b34fb)
	Modalias: usb:v1D6Bp0246d054B
	Discovering: no
	Roles: central
	Roles: peripheral
Advertising Features:
	ActiveInstances: 0x00 (0)
	SupportedInstances: 0x05 (5)
	SupportedIncludes: tx-power
	SupportedIncludes: appearance
	SupportedIncludes: local-name

and the card is active:

WP2:~ # btmon 
Bluetooth monitor ver 5.75
btmon[2652]: = Note: Linux version 6.9.0 (aarch64)                                                                                                           0.931248
btmon[2652]: = Note: Bluetooth subsystem version 2.22                                                                                                        0.931261
= New Index: 43:30:A0:00:1F:AC (Primary,UART,hci0)                                                                                                    [hci0] 0.931267
= Open Index: 43:30:A0:00:1F:AC                                                                                                                       [hci0] 0.931269
= Index Info: 43:30:A0:00:1F:AC (Broadcom Corporation)                                                                                                [hci0] 0.931274
bluetoothd[527]: @ MGMT Open: bluetoothd (privileged) version 1.22                                                                                  {0x0001} 0.931280
> HCI Event: Inquiry Complete (0x01) plen 1                                                                                                        #1 [hci0] 4.763176
        Status: Success (0x00)
@ MGMT Event: Discovering (0x0013) plen 2                                                                                                    {0x0001} [hci0] 4.763271
        Address type: 0x07
          BR/EDR
          LE Public
          LE Random
        Discovery: Disabled (0x00)
bluetoothd[527]: @ MGMT Command: Start Discovery (0x0023) plen 1                                                                            {0x0001} [hci0] 10.321299
        Address type: 0x07
          BR/EDR
          LE Public
          LE Random
< HCI Command: LE Set Random Address (0x08|0x0005) plen 6                                                                                         #2 [hci0] 10.321865
        Address: 02:CD:CF:EE:3E:C6 (Non-Resolvable)
> HCI Event: Command Complete (0x0e) plen 4                                                                                                       #3 [hci0] 10.324133
      LE Set Random Address (0x08|0x0005) ncmd 1
        Status: Success (0x00)
< HCI Command: LE Set Scan Parameters (0x08|0x000b) plen 7                                                                                        #4 [hci0] 10.324828
        Type: Active (0x01)
        Interval: 11.250 msec (0x0012)
        Window: 11.250 msec (0x0012)
        Own address type: Random (0x01)
        Filter policy: Accept all advertisement (0x00)
> HCI Event: Command Complete (0x0e) plen 4                                                                                                       #5 [hci0] 10.327133
      LE Set Scan Parameters (0x08|0x000b) ncmd 1
        Status: Success (0x00)
< HCI Command: LE Set Scan Enable (0x08|0x000c) plen 2                                                                                            #6 [hci0] 10.327426
        Scanning: Enabled (0x01)
        Filter duplicates: Enabled (0x01)
> HCI Event: Command Complete (0x0e) plen 4                                                                                                       #7 [hci0] 10.329142
      LE Set Scan Enable (0x08|0x000c) ncmd 1
        Status: Success (0x00)
@ MGMT Event: Command Complete (0x0001) plen 4                                                                                              {0x0001} [hci0] 10.329366
      Start Discovery (0x0023) plen 1
        Status: Success (0x00)
        Address type: 0x07
          BR/EDR
          LE Public
          LE Random
@ MGMT Event: Discovering (0x0013) plen 2                                                                                                   {0x0001} [hci0] 10.329418
        Address type: 0x07
          BR/EDR
          LE Public
          LE Random
        Discovery: Enabled (0x01)

However LE settings does indeed show "No Bluetooth device found." so I'm wondering if we have an issue with the d-bus agent or however else the device is detected?

TL/DR: the workaround will be to pair/connect things using bluetoothctl over SSH not the settings add-on.

@chewitt chewitt changed the title [BUG] Missing Bluetooth firmware on Wetek Play 2 (brcmfmac4330) [BUG] Bluetooth device not discovered by LE settings on WeTek Play2 May 17, 2024
@i3laze
Copy link
Author

i3laze commented May 17, 2024 •
edited
Loading

Thank you for checking. Will try the workaround via SSH, but can’t tell my parents to pair headphones that way.

Lucky me, @chewitt has his old Play 2 unit :)
Let this issue stay open until resolved.

@i3laze
Copy link
Author

i3laze commented Sep 17, 2024 •
edited
Loading

Out of curiosity I got TP-Link UB500 USB dongle connected:
https://forum.libreelec.tv/thread/25803-support-for-ub500-bluetooth-dongle/

On LE12 UB500 seems to work without extra drivers, yet Play2 add-on still shows “no device found”.
LE v12.0.1 included.

LibreELEC:~ # dmesg | grep -i blue
[ 9.030297] Bluetooth: Core ver 2.22
[ 9.030477] NET: Registered PF_BLUETOOTH protocol family
[ 9.030488] Bluetooth: HCI device and connection manager initialized
[ 9.030899] Bluetooth: HCI socket layer initialized
[ 9.030921] Bluetooth: L2CAP socket layer initialized
[ 9.031336] Bluetooth: SCO socket layer initialized
[ 9.307407] Bluetooth: HCI UART driver ver 2.3
[ 9.307440] Bluetooth: HCI UART protocol H4 registered
[ 9.307623] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 9.308192] Bluetooth: HCI UART protocol Broadcom registered
[ 9.308299] Bluetooth: HCI UART protocol QCA registered
[ 9.327811] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000b lmp_ver=0a lmp_subver=8761
[ 9.329778] Bluetooth: hci0: RTL: rom_version status=0 version=1
[ 9.329817] Bluetooth: hci0: RTL: loading rtl_bt/rtl8761bu_fw.bin
[ 9.358682] Bluetooth: hci0: RTL: loading rtl_bt/rtl8761bu_config.bin
[ 9.362264] Bluetooth: hci0: RTL: cfg_sz 6, total sz 30210
[ 9.683973] Bluetooth: hci1: BCM: chip id 62
[ 9.686212] Bluetooth: hci1: BCM: features 0x0f
[ 9.709339] Bluetooth: hci1: BCM4330B1
[ 9.709372] Bluetooth: hci1: BCM4330B1 (002.001.003) build 0000
[ 9.738692] Bluetooth: hci1: BCM4330B1 'brcm/BCM4330B1.hcd' Patch
[ 11.485883] Bluetooth: hci0: command 0xfc20 tx timeout
[ 11.485922] Bluetooth: hci0: RTL: Failed to generate devcoredump
[ 15.505465] Bluetooth: hci1: BCM: features 0x0f
[ 15.528556] Bluetooth: hci1: Win8 Tablet Semco SWB-B42G - BCM4330B1 37.4 MHz Class 2 NoExtLNA
[ 15.528588] Bluetooth: hci1: BCM4330B1 (002.001.003) build 1316
[ 15.642893] Bluetooth: MGMT ver 1.22
[ 18.503541] Bluetooth: RFCOMM TTY layer initialized
[ 18.503605] Bluetooth: RFCOMM socket layer initialized
[ 18.503650] Bluetooth: RFCOMM ver 1.11
[ 19.676974] Bluetooth: hci0: RTL: download fw command failed (-110)
[ 2312.921254] Bluetooth: hci0: RTL: examining hci_ver=0a hci_rev=000b lmp_ver=0a lmp_subver=8761
[ 2312.923118] Bluetooth: hci0: RTL: rom_version status=0 version=1
[ 2312.923156] Bluetooth: hci0: RTL: loading rtl_bt/rtl8761bu_fw.bin
[ 2312.924295] Bluetooth: hci0: RTL: loading rtl_bt/rtl8761bu_config.bin
[ 2312.924692] Bluetooth: hci0: RTL: cfg_sz 6, total sz 30210
[ 2313.198031] Bluetooth: hci0: RTL: fw version 0xdfc6d922
[ 2313.323947] Bluetooth: MGMT ver 1.22

LibreELEC:~ # btmon
Bluetooth monitor ver 5.75
btmon[2015]: = Note: Linux version 6.8.0 (aarch64) 0.018263
btmon[2015]: = Note: Bluetooth subsystem version 2.22 0.018282
= New Index: E8:48:B8:C8:20:00 (Primary,USB,hci0) [hci0] 0.018292
= Open Index: E8:48:B8:C8:20:00 [hci0] 0.018298
= Index Info: E8:48:B8:C8:20:00 (Realtek Semiconductor Corporation) [hci0] 0.018305
= New Index: 43:30:A0:00:1F:AC (Primary,UART,hci1) [hci1] 0.018314
= Open Index: 43:30:A0:00:1F:AC [hci1] 0.018320
= Index Info: 43:30:A0:00:1F:AC (Broadcom Corporation) [hci1] 0.018325
bluetoothd[635]: @ MGMT Open: bluetoothd (privileged) version 1.22 {0x0001} 0.018336

HCI Event: Inquiry Complete (0x01) plen 1 #1 [hci1] 3.773533
Status: Success (0x00)
@ MGMT Event: Discovering (0x0013) plen 2 {0x0001} [hci1] 3.773737
Address type: 0x07
BR/EDR
LE Public
LE Random
Discovery: Disabled (0x00)
LibreELEC:~ # bluetoothctl show
Controller E8:48:B8:C8:20:00 (public)
Manufacturer: 0x005d (93)
Version: 0x0a (10)
Name: LibreELEC #1
Alias: LibreELEC
Class: 0x000c0000 (786432)
Powered: yes
PowerState: on
Discoverable: no
DiscoverableTimeout: 0x000000b4 (180)
Pairable: yes
UUID: A/V Remote Control (0000110e-0000-1000-8000-00805f9b34fb)
UUID: Audio Source (0000110a-0000-1000-8000-00805f9b34fb)
UUID: PnP Information (00001200-0000-1000-8000-00805f9b34fb)
UUID: Audio Sink (0000110b-0000-1000-8000-00805f9b34fb)
UUID: A/V Remote Control Target (0000110c-0000-1000-8000-00805f9b34fb)
UUID: Generic Access Profile (00001800-0000-1000-8000-00805f9b34fb)
UUID: Generic Attribute Profile (00001801-0000-1000-8000-00805f9b34fb)
UUID: Device Information (0000180a-0000-1000-8000-00805f9b34fb)
Modalias: usb:v1D6Bp0246d054B
Discovering: no
Roles: central
Roles: peripheral
Advertising Features:
ActiveInstances: 0x00 (0)
SupportedInstances: 0x04 (4)
SupportedIncludes: tx-power
SupportedIncludes: appearance
SupportedIncludes: local-name
SupportedSecondaryChannels: 1M
SupportedSecondaryChannels: 2M
SupportedSecondaryChannels: Coded `

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
3 participants
@chewitt @heitbaum @i3laze