Skip to content

Latest commit

 

History

History
212 lines (170 loc) · 8.03 KB

README.md

File metadata and controls

212 lines (170 loc) · 8.03 KB

Build and test structure

The Build And Test Structure (BATS) is primarily intended to allow users and developers to quickly generate a set of regression tests for use with the Land Ice Validation and Verification toolkit LIVVkit.

BATS is a Python 3.6 module that is primarily controlled by command line options. BATS requires:

Python Packages

External Packages

If you have a working install of CISM, and you installed the suggested packages in the CISM users manual, you'll likely already have everything you need. If you haven't previously built CISM on your machine, we suggest following the installation instructions as they are laid out in the users manual first.

(Note: on some High Performance Computing platforms, a setup_PLATFORM.bash script has been provided which will attempt to load the needed modules.)

If you are having any troubles with dependencies, open an issue on the issue tracker!

Installation and Usage

Since BATS is most useful as a companion to the Land Ice Validation and Verification Toolkit LIVVkit, it is reccomended to create an Anaconda Python environment, with LIVVkit as the only requirement.

Firstly be sure Anaconda / Mamba is loaded or installed:

  • On Cheyenne: module load conda/latest
  • On Perlmutter module load python/3.9-anaconda-2021.11
  • Workstations or other HPC see Mamba
conda env create -n livv -c conda-forge livvkit
conda activate livv

this will install everything needed to run LIVVkit and BATS, and load the environment. Advanced users can also clone the LIVVkit repository and install in development mode, see the LIVVkit documentation for more information.

Then, clone the BATS repository, change into the directory:

git clone [email protected]:LIVVkit/BATS.git
cd BATS

If, for example you are using the Cheyenne supercomputer, setup the correct modules:

source setup_cheyenne

On other platforms, ensure that the compiler you intend to use (GCC, Intel, etc.) is loaded, as are CMake >= 3.7, as are the netCDF, and pnetCDF libraries.

You are now ready to run BATS!

The main BATS run script is build_and_test.py. BATS is primarily controlled via options specified at the command line. To see the full list of options, run:

./build_and_test.py --help

Example test

If the location of your CISM source code is stored in the environment variable $CISM, and your desired output directory (say /glade/scratch/${USER}/cism_tests/branchname_a) is $OUTDIR you can invoke BATS by:

./build_and_test.py --platform cheyenne-intel --cism-dir ${cism} --build_dir ./build --out-dir $OUTDIR

This will build CISM, setup the test, and if on an HPC system print out instructions on running the tests, or on a workstation it will run the tests, and output will be directed as described below in "How BATS works".

To use LIVVkit, to analize the differences, point the $cism environment variable at your updated code, and re-run, directing output to a new output directory (e.g. :/glade/scratch/${USER}/cism_tests/branchname_b), then run LIVVkit's validation suite

REF=/glade/scratch/${USER}/cism_tests/branchname_a/cheyenne-intel/CISM_glissade
TEST=/glade/scratch/${USER}/cism_tests/branchname_b/cheyenne-intel/CISM_glissade
livv -v $TEST $REF -o branch_vs_another -s

Which will generate a results website, in ./branch_vs_another directory and serve it locally. See the LIVVkit docs for a quickstart guide, and more detailed instructions.

How BATS works

BATS works very similar to how you would build CISM and then run one or more CISM tests. BATS will build a version of CISM, and then either run a set of regression tests if you are using a personal computer (PC), or setup a series of regression tests and generate a job submission script if you are using a high performance computer (HPC).

That is, if CISM is located in $CISM on ORNL's HPC platform titan, for example, and you want to run the $CISM/higher-order/dome test using the gnu compiler, you would typically build CISM by:

cd $CISM/builds/titan-gnu/
source titan-gnu-cmake
make -j 8

which would build a parallel version of CISM into the $CISM/builds/titan-gnu/cism_driver/ directory. Then you would go to the dome test directory, create a link to the CISM driver, and run the test:

cd $CISM/tests/higher-order/dome
ls -s $CISM/builds/titan-gnu/cism_driver/cism_driver cism_driver
./runDome.py

You would have to repeat this process for each individual test you'd like to run. BATS, however, automates these steps. On titan, running BATS like so

cd $CISM/tests/regression/
source setup_titan.bash
./build_and_test.py -p titan -c gnu -b ./build

will result in BATS generating all the CMake build file into a new directory called build, and building CISM into the directory build/cism_driver/. BATS will then run a set of CISM's higher-order tests:

  • Dome (at a variety of resolutions and processor counts)
  • Circular Shelf
  • Confined Shelf
  • ISMIP-HOM a and c (at 20 and 80 km resolutions)
  • ISMIP-HOM f
  • Stream

All of the files associated with each test will be output to a directory called reg_test/titan-gnu/CISM_glissade/ which has a leaf-node directory structure that provides some metadata for each test:

 reg_test/
    └── PLATFORM-COMPILER/
        └── CISM_glissade/
            ├── CMakeCache.txt
            |-- TEST/
                |-- CASE/
                    |-- DOF/ (degrees of freedom)
                        |-- PROCESSORS/
                            |-- [OPTIONAL TEST SPECIFIC DIRS]
                                |-- files.ext
        --------------------------------------------
            ├── all_jobs/
            │    ├── platform_job.small
            │    ├── platform_job.small_timing_?
            │    ├── platform_job.large
            │    └── platform_job.large_timing_?
            ├── submit_all_jobs.bash
            └── clean_timing.bash

where DOF is an s-prefixed integer indicating the test's size (units are test specific), and PROCESSORS is p-prefixed integer indicating the number of processors used to run the test. Everything below the dashed line will only appear on HPC systems. submit_all_jobs.bash will submit all the jobs in the jobs/ directory and clean_timing.bash will clean out any repeated test run for performance profiling such that only the timing files remain (to be used once all jobs have finished). This reg_test/titan-gnu/CISM_glissade directory is formatted to be used with LIVVkit 2.1+ directly.

BATS is designed to be flexible and work with any LIVVkit usage scenario. In order to do that, BATS provides a number of options to configure which system you are using, when/where/how CISM is built, the destination of the output directory, and which tests are run. For more information on these topics, see:

Authors

  • Joseph H. Kennedy, ORNL
    • github : @jhkennedy
  • Michael E. Kelleher, ORNL
    • github @mkstratos