Conbee II: Add install code is not supported #17492
Comments
|
Ping @ChrisHae + @manup (and @Koenkk as might have some contacts at Dresden Elektronik or other other deconz devs?) ConBee/RaspBee (deconz firmware) does not yet seem to implement Zigbee install code support in the deconz serial protocol and therefore ConBee/RaspBee does not currently offer feature-partity with with serial protocols for Texas Instruments Z-Stack and Silicon Labs EmberZNet for Zigbee Gateway host applications such as Zigbee2MQTT (which in turn depends on zigbee-herdsman). This first needs to be supported in the firmware for ConBee/RaspBee as well as be documented for their deconz-serial-protocol: dresden-elektronik/deconz-serial-protocol#20 If it is already supported for it in their firmware then it needs to be implemented in the deconz adapter code for zigbee-herdsman: https://github.com/Koenkk/zigbee-herdsman/tree/master/src/adapter/deconz zigbee-herdsman is the Zigbee framework that Zigbee2MQTT (and IoBroker) uses it as Zigbee adapter specific abstraction code: https://github.com/Koenkk/zigbee-herdsman/ Suggest that you also post a new feature for this under issues in the zigbee-herdsman repository for developer tracking as well: https://github.com/Koenkk/zigbee-herdsman/issues Note! FYI, all the Texas Instruments ZNP and Silicon Labs EZSP adapters do already support commissioning via install code. PS: This is related to this request in deconz radio library for zigpy (which is used by Home Assistant's ZHA, Domoticz, and Jeedom): |
|
Update; FYI, Dresden Elektronik's manup is having an dialog with zigpy dev here -> dresden-elektronik/deconz-serial-protocol#20 While the first device in question was the Bosch Thermostat II 230 V (BTH-RA / BTH-RM230Z), I understand that some other people using deCONZ or Zigbee2MQTT have also reported the same symptoms with a few other Bosch-branded Zigbee devices, like Bosch Smoke Alarm II (BSD-2), Bosch Door/window contact II (RBSH-SWD-ZB), and Bosch BWA-1 water sensor, with all of them requiring adding the install code to pair/join. Another device that been mentioned to require install code is the rotary switch Aqara H1 -> Koenkk/zigbee-herdsman#420 And a few LEDVANCE/hue/innr/tint/osram bulbs have them too but for them it might be optional? See -> #8498 |
|
This issue is stale because it has been open 30 days with no activity. Remove stale label or comment or this will be closed in 7 days |
|
no stale |
|
This issue is stale because it has been open 30 days with no activity. Remove stale label or comment or this will be closed in 7 days |
|
no stale |
|
This issue is stale because it has been open 30 days with no activity. Remove stale label or comment or this will be closed in 7 days |
|
Still relavent |
|
Any news from battlefield? |
The problem is upstream as Dresden-Elektronik's own developers (as in the company that makes ConBee and RaspBee) need to further document their deCONZ serial protocol to help third-parties who use it -> dresden-elektronik/deconz-serial-protocol#20 |
|
It is not yet implemented in the serial protocol. When it is, it can be added to z2mqtt deconz adapter. |
|
This issue is stale because it has been open 30 days with no activity. Remove stale label or comment or this will be closed in 7 days |
|
no stale |
|
Any news? |
|
Would be nice to understand the estimated timeline so I know if I should
move away from conbee II or not
…On Thu, Oct 19, 2023, 14:10 pixartist ***@***.***> wrote:
Any news?
—
Reply to this email directly, view it on GitHub
<#17492 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AEJZPFS2DCBWF4GQKMQRF5LYAEKDVAVCNFSM6AAAAAAXQEBCFCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTONZQHAZDCNZTG4>
.
You are receiving this because you are subscribed to this thread.Message
ID: ***@***.***>
|
|
Any news? |
|
I would also very much appreciate any news on this problem. |
|
I have just received my Bosch thermostat but receiving the same error with my Conbee stick. News on this issue very much appreciated. |
|
Still no news, again the issue is with upstream, see -> dresden-elektronik/deconz-serial-protocol#20
|
|
There is no official support of install codes for ConBee or RaspBee. |
|
@ChrisHae is it still on your roadmap? You wrote this in your other issue:
Originally posted by @ChrisHae in dresden-elektronik/deconz-serial-protocol#20 (comment) |
|
I think it is. But I'm not firmware developer. Better ask in dresden elektronik github pages or manup directly. |
|
Is there are news on this? Bought a Bosch Thermostat when I saw it as supported on zigbee2mqtt's list, only to have the issue trying to pair with the conbeeII. Is there a list somewhere of the Adapters that actually support this? Might as well upgrade from the conbee2 if this wil ltake too long. Thanks |
Only supported by Texas Instruments and Silicon Labs based adapters so far as still not documented for deconz serial protocol -> dresden-elektronik/deconz-serial-protocol#20 |
What happened?
I want to add my new Bosch Thermostat II 230 V (BTH-RM230Z) with Home Assistant and Conbee II via install code.
Therefore I scanned the qr code from the back of the device and entered it into the "Add install code" tool.
Afterwards the error
Add install code is not supportedis shown.Logs:
What did you expect to happen?
It should add the device to z2m.
How to reproduce it (minimal and precise)
I'm using Conbee 2 from dresden-elektronik.
Used the function "Add install code" from Settings > Tools.
Related to #14510. I guess Conbee 2 did not support install codes yet. With v2.22.0-beta there should be support. Maybe we can leverage this here (dresden-elektronik/deconz-rest-plugin#6791)
Zigbee2MQTT version
1.30.3
Adapter firmware version
0x26780700
Adapter
ConBee2
Debug log
No response
The text was updated successfully, but these errors were encountered: