You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
I have a couple of Moes Star Ring switches already connected to my network, 8 switches that are connected to mains and 4 powered by batteries. I have a bunch of other devices (46 routers included). Today I tried to add one more Moes switch that runs on batteries, but after I press "permit to join" in the Zigbee2Mqtt and enter the pairing mode on the switch, nothing happens... Nothing in the logs as well...
I tried to pair some other device (Aquara door sensor) that I had handy and that worked correctly. I also tried to permit to join only the coordinator and put the new switch close to the coordinator (0cm close) without luck... I tried to connect to some router that according to the map had no other nodes connected, and also no luck, I tried with some other moes switches (I have 5 of them), none of them worked... quite unlikely that all 5 are broken.
The whole network (including already connected moes switches) is working correctly...
reacted with thumbs up emoji reacted with thumbs down emoji reacted with laugh emoji reacted with hooray emoji reacted with confused emoji reacted with heart emoji reacted with rocket emoji reacted with eyes emoji
-
I have a couple of Moes Star Ring switches already connected to my network, 8 switches that are connected to mains and 4 powered by batteries. I have a bunch of other devices (46 routers included). Today I tried to add one more Moes switch that runs on batteries, but after I press "permit to join" in the Zigbee2Mqtt and enter the pairing mode on the switch, nothing happens... Nothing in the logs as well...
I tried to pair some other device (Aquara door sensor) that I had handy and that worked correctly. I also tried to permit to join only the coordinator and put the new switch close to the coordinator (0cm close) without luck... I tried to connect to some router that according to the map had no other nodes connected, and also no luck, I tried with some other moes switches (I have 5 of them), none of them worked... quite unlikely that all 5 are broken.
The whole network (including already connected moes switches) is working correctly...
My setup:
Zigbee2MQTT version: 1.40.1
Coordinator type: ConBee3
Coordinator revision: 0x26530900
Frontend version: 0.7.4
zigbee-herdsman-converters version: 20.12.1
zigbee-herdsman version: 0.57.3
HA:
Core: 2024.9.1
Supervisor: 2024.08.0
Operating System: 12.3
Frontend: 20240906.0
Other (already paired) battery switches are listed in devices list with Zigbee Model TS0043
is there anything that I can do to diagnose and solve the issue?
Beta Was this translation helpful? Give feedback.
All reactions