Skip to content

Latest commit

 

History

History
225 lines (165 loc) · 8.08 KB

install.md

File metadata and controls

225 lines (165 loc) · 8.08 KB
Raw

Install

This document demonstrates how to install code-server on various distros and operating systems.

Upgrading

When upgrading you can just install the new version over the old one. code-server maintains all user data in ~/.local/share/code-server so that it is preserved in between installations.

install.sh

We have a script to install code-server for Linux, macOS and FreeBSD.

It tries to use the system package manager if possible.

First run to print out the install process:

curl -fsSL https://code-server.dev/install.sh | sh -s -- --dry-run

Now to actually install:

curl -fsSL https://code-server.dev/install.sh | sh

The script will print out how to run and start using code-server.

If you believe an install script used with curl | sh is insecure, please give this wonderful blogpost by sandstorm.io a read.

If you'd still prefer manual installation despite the below detection reference and --dry-run then continue on for docs on manual installation. The install.sh script runs the exact same commands presented in the rest of this document.

Flags

  • --dry-run to echo the commands for the install process without running them.
  • --method to choose the installation method.
    • --method=detect to detect the package manager but fallback to --method=standalone.
    • --method=standalone to install a standalone release archive into ~/.local.
  • --prefix=/usr/local to install a standalone release archive system wide.
  • --version=X.X.X to install version X.X.X instead of latest.
  • --help to see full usage docs.

Detection Reference

  • For Debian, Ubuntu and Raspbian it will install the latest deb package.

  • For Fedora, CentOS, RHEL and openSUSE it will install the latest rpm package.

  • For Arch Linux it will install the AUR package.

  • For any unrecognized Linux operating system it will install the latest standalone release into ~/.local.

    • Add ~/.local/bin to your $PATH to run code-server.

  • For macOS it will install the Homebrew package.

    • If Homebrew is not installed it will install the latest standalone release into ~/.local.
    • Add ~/.local/bin to your $PATH to run code-server.

  • For FreeBSD, it will install the npm package with yarn or npm.

  • If ran on an architecture with no releases, it will install the npm package with yarn or npm.

    • We only have releases for amd64 and arm64 presently.
    • The npm package builds the native modules on postinstall.

Debian, Ubuntu

NOTE: The standalone arm64 .deb does not support Ubuntu <16.04. Please upgrade or build with yarn.

curl -fOL https://github.com/cdr/code-server/releases/download/v3.9.3/code-server_3.9.3_amd64.deb
sudo dpkg -i code-server_3.9.3_amd64.deb
sudo systemctl enable --now code-server@$USER
# Now visit http://127.0.0.1:8080. Your password is in ~/.config/code-server/config.yaml

Fedora, CentOS, RHEL, SUSE

NOTE: The standalone arm64 .rpm does not support CentOS 7. Please upgrade or build with yarn.

curl -fOL https://github.com/cdr/code-server/releases/download/v3.9.3/code-server-3.9.3-amd64.rpm
sudo rpm -i code-server-3.9.3-amd64.rpm
sudo systemctl enable --now code-server@$USER
# Now visit http://127.0.0.1:8080. Your password is in ~/.config/code-server/config.yaml

Arch Linux

# Installs code-server from the AUR using yay.
yay -S code-server
sudo systemctl enable --now code-server@$USER
# Now visit http://127.0.0.1:8080. Your password is in ~/.config/code-server/config.yaml
# Installs code-server from the AUR with plain makepkg.
git clone https://aur.archlinux.org/code-server.git
cd code-server
makepkg -si
sudo systemctl enable --now code-server@$USER
# Now visit http://127.0.0.1:8080. Your password is in ~/.config/code-server/config.yaml

Termux

Please see "Installation" in the Termux docs

yarn, npm

We recommend installing with yarn or npm when:

  1. You aren't on amd64 or arm64.
  2. If you're on Linux with glibc < v2.17 or glibcxx < v3.4.18 on amd64, or glibc < v2.23 or glibcxx < v3.4.21 on arm64.
  3. You're running Alpine Linux, or are using a non-glibc libc. See #1430

note: Installing via yarn or npm builds native modules on install and so requires C dependencies. See ./npm.md for installing these dependencies.

You will need at least node v12 installed. See #1633.

yarn global add code-server
# Or: npm install -g code-server
code-server
# Now visit http://127.0.0.1:8080. Your password is in ~/.config/code-server/config.yaml

macOS

brew install code-server
brew services start code-server
# Now visit http://127.0.0.1:8080. Your password is in ~/.config/code-server/config.yaml

Standalone Releases

We publish self contained .tar.gz archives for every release on github. They bundle the node binary and node_modules.

These are created from the npm package and the rest of the releases are created from these. Only requirement is glibc >= 2.17 && glibcxx >= v3.4.18 on Linux and for macOS there is no minimum system requirement.

  1. Download the latest release archive for your system from github.
  2. Unpack the release.
  3. You can run code-server by executing ./bin/code-server.

You can add the code-server bin directory to your $PATH to easily execute code-server without the full path every time.

Here is an example script for installing and using a standalone code-server release on Linux:

mkdir -p ~/.local/lib ~/.local/bin
curl -fL https://github.com/cdr/code-server/releases/download/v3.9.3/code-server-3.9.3-linux-amd64.tar.gz \
  | tar -C ~/.local/lib -xz
mv ~/.local/lib/code-server-3.9.3-linux-amd64 ~/.local/lib/code-server-3.9.3
ln -s ~/.local/lib/code-server-3.9.3/bin/code-server ~/.local/bin/code-server
PATH="~/.local/bin:$PATH"
code-server
# Now visit http://127.0.0.1:8080. Your password is in ~/.config/code-server/config.yaml

Docker

# This will start a code-server container and expose it at http://127.0.0.1:8080.
# It will also mount your current directory into the container as `/home/coder/project`
# and forward your UID/GID so that all file system operations occur as your user outside
# the container.
#
# Your $HOME/.config is mounted at $HOME/.config within the container to ensure you can
# easily access/modify your code-server config in $HOME/.config/code-server/config.json
# outside the container.
mkdir -p ~/.config
docker run -it --name code-server -p 127.0.0.1:8080:8080 \
  -v "$HOME/.config:/home/coder/.config" \
  -v "$PWD:/home/coder/project" \
  -u "$(id -u):$(id -g)" \
  -e "DOCKER_USER=$USER" \
  codercom/code-server:latest

Our official image supports amd64 and arm64.

For arm32 support there is a popular community maintained alternative:

https://hub.docker.com/r/linuxserver/code-server

helm

See the chart.

Cloud Providers

We maintain one-click apps and install scripts for different cloud providers such as DigitalOcean, Railway, Heroku, Azure, etc. Check out the repository:

https://github.com/cdr/deploy-code-server