Skip to content

Latest commit

 

History

History
324 lines (224 loc) · 10.1 KB

README.md

File metadata and controls

324 lines (224 loc) · 10.1 KB

Alpaca Alpaca

Build Status Contribution Guidelines LICENSE codecov

Introduction

Event-driven middleware based on Apache Camel that synchronizes a Fedora repository with a Drupal instance.

Requirements

This project requires Java 11 and can be built with Gradle.

To build and test locally, clone this repository and then change into the Alpaca directory. Next run ./gradlew clean build shadowJar.

The main executable jar is available in the islandora-alpaca-app/build/libs directory, with the classifier -all.

ie.

islandora-alpaca-app/build/libs/islandora-alpaca-app-2.0.0-all.jar

Configuration

Alpaca is made up of several services, each of these can be enabled or disabled individually.

Alpaca takes an external file to configure its behaviour.

Look at the example.properties file to see some example settings.

The properties are:

# Common options
error.maxRedeliveries=4

This defines how many times to retry a message before failing completely.

There are also common ActiveMQ properties to setup the connection.

# ActiveMQ options
jms.brokerUrl=tcp://localhost:61616

This defines the url to the ActiveMQ broker.

jms.username=
jms.password=

This defines the login credentials (if required)

jms.connections=10

This defines the pool of connections to the ActiveMQ instance.

jms.concurrent-consumers=1

This defines how many messages to process simultaneously.

islandora-indexing-fcrepo

This service manages a Drupal node into a corresponding Fedora resource.

It's properties are:

# Fcrepo indexer options
fcrepo.indexer.enabled=true

This defines whether the Fedora indexer is enabled or not.

fcrepo.indexer.node=queue:islandora-indexing-fcrepo-content
fcrepo.indexer.delete=queue:islandora-indexing-fcrepo-delete
fcrepo.indexer.media=queue:islandora-indexing-fcrepo-media
fcrepo.indexer.external=queue:islandora-indexing-fcrepo-file-external

These define the various queues to listen on for the indexing/deletion messages. The part after queue: should match your Islandora instance "Actions".

fcrepo.indexer.milliner.baseUrl=http://localhost:8000/milliner

This defines the location of your Milliner microservice.

fcrepo.indexer.concurrent-consumers=1
fcrepo.indexer.max-concurrent-consumers=1

These define the default number of concurrent consumers and maximum number of concurrent consumers working off your ActiveMQ instance. A value of -1 means no setting is applied.

fcrepo.indexer.async-consumer=true

This property allows the concurrent consumers to process concurrently; otherwise, the consumers will wait to the previous message has been processed before executing.

islandora-indexing-triplestore

This service indexes the Drupal node into the configured triplestore

It's properties are:

# Triplestore indexer options
triplestore.indexer.enabled=false

This defines whether the Triplestore indexer is enabled or not.

triplestore.index.stream=queue:islandora-indexing-triplestore-index
triplestore.delete.stream=queue:islandora-indexing-triplestore-delete

These define the various queues to listen on for the indexing/deletion messages. The part after queue: should match your Islandora instance "Actions".

triplestore.baseUrl=http://localhost:8080/bigdata/namespace/kb/sparql

This defines the location of your triplestore's SPARQL update endpoint.

triplestore.indexer.concurrent-consumers=1
triplestore.indexer.max-concurrent-consumers=1

These define the default number of concurrent consumers and maximum number of concurrent consumers working off your ActiveMQ instance. A value of -1 means no setting is applied.

triplestore.indexer.async-consumer=true

This property allows the concurrent consumers to process concurrently; otherwise, the consumers will wait to the previous message has been processed before executing.

islandora-connector-derivative

This service is used to configure an external microservice. This service will deploy multiple copies of its routes with different configured inputs and outputs based on properties.

The routes to be configured are defined with the property derivative.systems.installed which expects a comma separated list. Each item in the list defines a new route and must also define 3 additional properties.

derivative.<item>.enabled=true

This defines if the item service is enabled.

derivative.<item>.in.stream=queue:islandora-item-connector.index

This is the input queue for the derivative microservice. The part after queue: should match your Islandora instance "Actions".

derivative.<item>.service.url=http://example.org/derivative/convert

This is the microservice URL to process the request.

derivative.<item>.concurrent-consumers=1
derivative.<item>.max-concurrent-consumers=1

These define the default number of concurrent consumers and maximum number of concurrent consumers working off your ActiveMQ instance. A value of -1 means no setting is applied.

derivative.<item>.async-consumer=true

This property allows the concurrent consumers to process concurrently; otherwise, the consumers will wait to the previous message has been processed before executing.

For example, with two services defined (houdini and crayfits) my configuration would have

derivative.systems.installed=houdini,fits

derivative.houdini.enabled=true
derivative.houdini.in.stream=queue:islandora-connector-houdini
derivative.houdini.service.url=http://127.0.0.1:8000/houdini/convert
derivative.houdini.concurrent-consumers=1
derivative.houdini.max-concurrent-consumers=4
derivative.houdini.async-consumer=true

derivative.fits.enabled=true
derivative.fits.in.stream=queue:islandora-connector-fits
derivative.fits.service.url=http://127.0.0.1:8000/crayfits
derivative.fits.concurrent-consumers=2
derivative.fits.max-concurrent-consumers=2
derivative.fits.async-consumer=false

Customizing HTTP client timeouts

You can alter the HTTP client from the defaults for its request, connection and socket timeouts. To do this you want to enable the request configurer.

request.configurer.enabled=true

Then set the next 3 timeouts (measured in milliseconds) to the desired timeout.

request.timeout=-1
connection.timeout=-1
socket.timeout=-1

The default for all three is -1 which indicates no timeout.

Alter HTTP options

By default, Alpaca uses two settings for the HTTP component, these are

  • disableStreamCache=true
  • connectionClose=true

If you want to send additional configuration parameters or alter the existing defaults. You can add them as a comma separated list of key=value pairs.

For example

http.additional_options=authMethod=Basic,authUsername=Jim,authPassword=1234

These will be added to ALL http endpoint requests.

Note: We are currently running Camel 3.7.6, some configuration parameters on the above linked page might not be supported.

Deploying/Running

You can see the options by passing the -h|--help flag

> java -jar  islandora-alpaca-app/build/libs/islandora-alpaca-app-2.0.0-all.jar -h
Usage: alpaca [-hV] [-c=<configurationFilePath>]
  -h, --help      Show this help message and exit.
  -V, --version   Print version information and exit.
  -c, --config=<configurationFilePath>
                  The path to the configuration file

Using the -V|--version flag will just return the current version of the application.

> java -jar  islandora-alpaca-app/build/libs/islandora-alpaca-app-2.0.0-all.jar -v
2.0.0

To start Alpaca you would pass the external property file with the -c|--config flag.

For example if you are using an external properties file located at /opt/my.properties, you would run:

java -jar islandora-alpaca-app-2.0.0-all.jar -c /opt/my.properties

Debugging/Troubleshooting

Logging is done to the console, and defaults to the INFO level. To get more verbose logging you can use the Java property islandora.alpaca.log

i.e.

java -Dislandora.alpaca.log=DEBUG -jar islandora-alpaca-app-2.0.0-all.jar -c /opt/my.properties

Documentation

Further documentation for this module is available on the Islandora documentation site.

Troubleshooting/Issues

Having problems or solved a problem? Check out the Islandora google groups for a solution.

Current Maintainers

Sponsors

  • Discoverygarden
  • LYRASIS
  • York University
  • McMaster University
  • University of Prince Edward Island
  • University of Manitoba
  • University of Limerick
  • Simon Fraser University
  • PALS

Development

If you would like to contribute, please get involved by attending our weekly Tech Call. We love to hear from you!

If you would like to contribute code to the project, you need to be covered by an Islandora Foundation Contributor License Agreement or Corporate Contributor License Agreement. Please see the Contributors pages on Islandora.ca for more information.

We recommend using the islandora-playbook to get started.

Licensing

MIT