You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
Long time no speak. I am still running Heyu sucessfully with many thanks to you. I recently spotted a 433Mhz temperature/humidity sensor that is decoded by my RFXCOM. I wondered if this might be plumbed in to my Heyu config file and handled by the X10 extension or some such.
The device can transmit in three modes although 1&3 appear to be the same.
Switch positions 1 & 3 Temperature & Humidity:
17/08/2023 06:05:55:194= 0A520A0982F901093701A9
Packettype = TEMP_HUM
subtype = TH10 - Rubicson,IW008T,TX95,Xiron-EN6,WH5
channel 249
Sequence nbr = 9
ID = 82F9 decimal:33529
Temperature = 26.5 °C
Humidity = 55
Status = Comfortable
Signal level = 10 -40dBm
Battery = OK
Switch postion 2 Temperature only:
17/08/2023 06:04:43:665= 085009088601010A99
Packettype = TEMP
subtype = TEMP9 - RUBiCSON 48695
Sequence nbr = 8
ID = 8601 decimal:34305
Temperature = 26.6 °C
Signal level = 9 -48dBm
Battery = OK
Perhaps the Heyu code is structured in a way that might permit me to add the device.
reacted with thumbs up emoji reacted with thumbs down emoji reacted with laugh emoji reacted with hooray emoji reacted with confused emoji reacted with heart emoji reacted with rocket emoji reacted with eyes emoji
-
Hello Janusz,
Long time no speak. I am still running Heyu sucessfully with many thanks to you. I recently spotted a 433Mhz temperature/humidity sensor that is decoded by my RFXCOM. I wondered if this might be plumbed in to my Heyu config file and handled by the X10 extension or some such.
The device can transmit in three modes although 1&3 appear to be the same.
Switch positions 1 & 3 Temperature & Humidity:
17/08/2023 06:05:55:194= 0A520A0982F901093701A9
Packettype = TEMP_HUM
subtype = TH10 - Rubicson,IW008T,TX95,Xiron-EN6,WH5
channel 249
Sequence nbr = 9
ID = 82F9 decimal:33529
Temperature = 26.5 °C
Humidity = 55
Status = Comfortable
Signal level = 10 -40dBm
Battery = OK
Switch postion 2 Temperature only:
17/08/2023 06:04:43:665= 085009088601010A99
Packettype = TEMP
subtype = TEMP9 - RUBiCSON 48695
Sequence nbr = 8
ID = 8601 decimal:34305
Temperature = 26.6 °C
Signal level = 9 -48dBm
Battery = OK
Perhaps the Heyu code is structured in a way that might permit me to add the device.
Many thanks, John.
Beta Was this translation helpful? Give feedback.
All reactions