windsensor.yaml

name: Wind Sensor # Device name can not contain the vendor name
description: Wind Sensor with controllable LED

# Hardware versions (optional, use when you have revisions)
hardwareVersions:
  - version: '1.0'
    numeric: 1
  - version: '1.0-rev-A'
    numeric: 2

# Firmware versions (at least one is mandatory)
firmwareVersions:
  - # Firmware version
    version: '1.0'
    numeric: 1
    # Corresponding hardware versions (optional)
    hardwareVersions:
      - '1.0'

    # Firmware features (optional)
    # Valid values are: remote rejoin (trigger a join from the application layer), transmission interval (configure how
    # often he device sends a message).
    features:
      - remote rejoin
      - transmission interval

    # LoRaWAN Device Profiles per region
    # Supported regions are EU863-870, US902-928, AU915-928, AS923, CN779-787, EU433, CN470-510, KR920-923, IN865-867,
    # RU864-870
    profiles:
      EU863-870:
        # Optional identifier of the vendor of the profile. When you specify the vendorID, the profile is loaded from
        # the vendorID's folder. This allows you to reuse profiles from module or LoRaWAN end device stack vendors.
        # If vendorID is empty, the current vendor ID is used. In this example, the vendorID is the current vendor ID,
        # which is verbose.
        vendorID: example
        # Identifier of the profile (lowercase, alphanumeric with dashes, max 36 characters)
        id: windsensor-profile
        lorawanCertified: true
        codec: windsensor-codec
      US902-928:
        id: windsensor-profile
        lorawanCertified: true
        codec: windsensor-codec

  - # You can add more firmware versions and use different profiles per version
    version: '2.0'
    numeric: 2
    hardwareVersions:
      - '1.0-rev-A'
    profiles:
      EU863-870:
        id: windsensor-profile
        lorawanCertified: true
        codec: windsensor-codec
      US902-928:
        id: windsensor-profile
        lorawanCertified: true
        codec: windsensor-codec
      AS923:
        id: windsensor-profile
        codec: windsensor-codec

# Type of device (optional)
# Valid values are: devkit, module, cots
deviceType: cots

# Sensors that this device features (optional)
# Valid values are:
# 4-20 ma, accelerometer, altitude, analog input, auxiliary, barometer, battery, button, bvoc, co, co2, conductivity, current, digital input,
# digital output, dissolved oxygen, distance, dust, energy, gps, gyroscope, h2s, hall effect, humidity, iaq, infrared, leaf wetness, level,
# light, lightning, link, magnetometer, moisture, motion, nfc, no, no2, o3, occupancy, optical meter, particulate matter, ph, pir,
# pm2.5, pm10, potentiometer, power, precipitation, pressure, proximity, pulse count, pulse frequency, radar, rainfall, reed switch, rssi,
# sap flow, smart valve, smoke, snr, so2, solar radiation, sound, strain, surface temperature, switch, temperature, tilt, time, turbidity,
# tvoc, uv, vapor pressure, velocity, vibration, voltage, water potential, water, weight, wifi ssid, wind direction, wind speed.
sensors:
  - wind direction
  - wind speed

# Additional radios that this device has (optional)
# Valid values are: ble, nfc, wifi, cellular.
additionalRadios:
  - ble
  - cellular

# Bridge interfaces (optional)
# Valid values are: modbus, m-bus, can bus, rs-485, sdi-12, analog, ethernet.
bridgeInterfaces:
  - m-bus
  - rs-485

# Dimensions in mm (optional)
# Use width, height, length and/or diameter
dimensions:
  width: 34
  length: 26
  height: 77

# Weight in grams (optional)
weight: 350

# Battery information (optional)
battery:
  replaceable: true
  type: AA

# Operating conditions (optional)
operatingConditions:
  # Temperature (Celsius)
  temperature:
    min: -30
    max: 85
  # Relative humidity (fraction of 1)
  relativeHumidity:
    min: 0
    max: 0.97

# IP rating (optional)
ipCode: IP64

# Key provisioning (optional)
# Valid values are: custom (user can configure keys), join server and manifest.
keyProvisioning:
  - custom
  - join server

# Key programming (optional)
# Valid values are: bluetooth, nfc, wifi, ethernet (via a webpage), serial (when the user has a serial interface to set the keys)
# and firmware (when the user should change the firmware to set the keys).
keyProgramming:
  - serial
  - firmware

# Key security (optional)
# Valid values are: none, read protected and secure element.
keySecurity: none

# Firmware programming (optional)
# Valid values are: serial (when the user has a serial interface to update the firmware), ethernet, fuota lorawan (when the device
# supports LoRaWAN FUOTA via standard interfaces) and fuota other (other wireless update mechanism).
firmwareProgramming:
  - serial
  - fuota lorawan

# Product and data sheet URLs (optional)
productURL: https://example.org/wind-sensor
dataSheetURL: https://example.org/wind-sensor/datasheet.pdf
# Link to simple, easy onboarding instructions for the device (optional).
# Please do not use this for marketing or overly technical documents like a data sheet.
onboardingGuideURL: https://www.thethingsindustries.com/docs/devices/models/windsensor

# Commercial information
resellerURLs:
  - name: 'Reseller 1'
    region: # valid regions are: Argentina, Australia, Brazil, Canada, China, European Union, India, Indonesia.
      # Japan, Mexico, Russia, Saudi Arabia, South Africa, South Korea, Turkey, United States, Other
      - European Union
    url: https://example.org/reseller1
  - name: 'Reseller 2'
    region:
      - United States
      - Canada
    url: https://example.org/reseller2
msrp:
  EUR: 90
  USD: 120

# Photos
photos:
  main: windsensor.png # Image needs to have a transparent background
  other:
    - windsensor-package.png # Image needs to have a transparent background

# Youtube or Vimeo Video (optional)
videos:
  main: https://www.youtube.com/watch?v=JHzxcD2oEn8

# Regulatory compliances (optional)
compliances:
  safety:
    - body: IEC
      norm: EN
      standard: 62368-1
  radioEquipment:
    - body: ETSI
      norm: EN
      standard: 301 489-1
      version: 2.2.0
    - body: ETSI
      norm: EN
      standard: 301 489-3
      version: 2.1.0