-
Notifications
You must be signed in to change notification settings - Fork 9
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Box connected to WiFi network, but can't use internet? #39
Comments
i compared config (wireless, network and dhcp config) with the config on a connected device, their the same. |
This box still appeared in the connect.doodle3d.com list because it sign-in before the update and after the update it received the same ip address. |
It can ping ip addresses.
|
dnsmasq is running:
|
No difference in |
Later we could try changing the nameserver to one of google's. |
All the same as the connected WiFi-Box. |
(Same as the connected WiFi-Box) |
Notable:
|
on wifibox that works normally, connecting to internet etc:
|
Box with issue reads a different resolv configuration?
Box without issue:
The box without issues seems to use the |
Possibly relevant dnsmask logs:
Box without issue:
(We say without issues, but the fact that it starts and stops 3 times and complains about |
Logread (without time and proces id's) difference: --- left
+++ right
@@ -1,5 +1,5 @@
kern.notice kernel: Linux version 3.10.49 (openwrt@31fdf3fd6cd2) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r45620) ) #4 Wed Jun 17 12:28:52 UTC 2015
-kern.debug kernel: MyLoader: sysp=b05cbf4e, boardp=573960b5, parts=5fba3108
+kern.debug kernel: MyLoader: sysp=444ba8b5, boardp=5fbcaeef, parts=ebc66edc
kern.info kernel: bootconsole [early0] enabled
kern.info kernel: CPU revision is: 00019374 (MIPS 24Kc)
kern.info kernel: SoC: Atheros AR9330 rev 1
@@ -103,10 +103,7 @@
kern.info kernel: usbcore: registered new interface driver usbserial_generic
kern.info kernel: usbserial: USB Serial support registered for generic
kern.info kernel: xt_time: kernel timezone is -0000
-kern.info kernel: usbcore: registered new interface driver ftdi_sio
-kern.info kernel: usbserial: USB Serial support registered for FTDI USB Serial Device
kern.info kernel: cfg80211: Calling CRDA to update world regulatory domain
-kern.info kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
kern.info kernel: cfg80211: World regulatory domain updated:
kern.info kernel: cfg80211: DFS Master region: unset
kern.info kernel: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
@@ -118,6 +115,9 @@
kern.info kernel: cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
kern.info kernel: cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
kern.info kernel: cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
+kern.info kernel: usbcore: registered new interface driver ftdi_sio
+kern.info kernel: usbserial: USB Serial support registered for FTDI USB Serial Device
+kern.info kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
kern.debug kernel: ath: EEPROM regdomain: 0x0
kern.debug kernel: ath: EEPROM indicates default country code should be used
kern.debug kernel: ath: doing EEPROM country->regdmn map search
@@ -147,9 +147,6 @@
daemon.notice netifd: Interface 'loopback' is now up
daemon.notice netifd: Network device 'lo' link is up
daemon.notice netifd: Interface 'loopback' has link connectivity
-user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
-daemon.err odhcpd: Failed to open routing table: No such file or directory
-daemon.err odhcpd: Unable to open raw socket: Address family not supported by protocol
kern.info kernel: cfg80211: Calling CRDA for country: NL
kern.info kernel: cfg80211: Regulatory domain changed to country: NL
kern.info kernel: cfg80211: DFS Master region: ETSI
@@ -159,53 +156,175 @@
kern.info kernel: cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s)
kern.info kernel: cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm), (0 s)
kern.info kernel: cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
+daemon.err odhcpd: Failed to open routing table: No such file or directory
+daemon.err odhcpd: Unable to open raw socket: Address family not supported by protocol
+user.notice firewall: Reloading firewall due to ifup of lan (br-lan)
daemon.notice netifd: Interface 'wlan' is enabled
user.info autowifi: Invoking Doodle3D WiFi box network auto-initialization...
kern.info kernel: wlan0: authenticate with d8:5d:4c:c2:0b:08
kern.info kernel: wlan0: send auth to d8:5d:4c:c2:0b:08 (try 1/3)
kern.info kernel: wlan0: authenticated
kern.info kernel: wlan0: associate with d8:5d:4c:c2:0b:08 (try 1/3)
-kern.info kernel: wlan0: RX AssocResp from d8:5d:4c:c2:0b:08 (capab=0x431 status=0 aid=5)
+kern.info kernel: wlan0: RX AssocResp from d8:5d:4c:c2:0b:08 (capab=0x431 status=0 aid=18)
kern.info kernel: wlan0: associated
daemon.notice netifd: Network device 'wlan0' link is up
daemon.notice netifd: Interface 'wlan' has link connectivity
daemon.notice netifd: Interface 'wlan' is setting up now
daemon.notice netifd: wlan: udhcpc (v1.22.1) started
daemon.notice netifd: wlan: Sending discover...
-daemon.notice netifd: wlan: Sending select for 10.0.0.134...
-daemon.notice netifd: wlan: Lease of 10.0.0.134 obtained, lease time 43200
+daemon.notice netifd: wlan: Sending select for 10.0.0.167...
+daemon.notice netifd: wlan: Lease of 10.0.0.167 obtained, lease time 43200
+daemon.notice netifd: Interface 'wlan' is now up
daemon.info dnsmasq: started, version 2.71 cachesize 150
daemon.info dnsmasq: compile time options: no-IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC
-daemon.info dnsmasq: reading /etc/resolv.conf
-daemon.warn dnsmasq: ignoring nameserver 127.0.0.1 - local interface
+daemon.info dnsmasq-dhcp: DHCP, IP range 192.168.5.100 -- 192.168.5.249, lease time 12h
+daemon.info dnsmasq: using local addresses only for domain lan
+daemon.info dnsmasq: reading /tmp/resolv.conf.auto
+daemon.info dnsmasq: using local addresses only for domain lan
+daemon.info dnsmasq: using nameserver 10.0.0.1#53
daemon.info dnsmasq: read /etc/hosts - 1 addresses
-daemon.notice netifd: Interface 'wlan' is now up
-daemon.err odhcpd: Failed to open routing table: No such file or directory
-daemon.err odhcpd: Unable to open raw socket: Address family not supported by protocol
-daemon.info dnsmasq: reading /etc/resolv.conf
-daemon.warn dnsmasq: ignoring nameserver 127.0.0.1 - local interface
-daemon.err odhcpd: Failed to open routing table: No such file or directory
-daemon.err odhcpd: Unable to open raw socket: Address family not supported by protocol
-daemon.info dnsmasq: reading /etc/resolv.conf
-daemon.warn dnsmasq: ignoring nameserver 127.0.0.1 - local interface
-daemon.err odhcpd: Failed to open routing table: No such file or directory
-daemon.err odhcpd: Unable to open raw socket: Address family not supported by protocol
+daemon.info dnsmasq: read /tmp/hosts/dhcp - 0 addresses
+daemon.info dnsmasq-dhcp: read /etc/ethers - 0 addresses
+daemon.info dnsmasq: exiting on receipt of SIGTERM
+daemon.info dnsmasq: started, version 2.71 cachesize 150
+daemon.info dnsmasq: compile time options: no-IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC
+daemon.info dnsmasq-dhcp: DHCP, IP range 192.168.5.100 -- 192.168.5.249, lease time 12h
+daemon.info dnsmasq-dhcp: DHCP, IP range 192.168.5.100 -- 192.168.5.249, lease time 12h
+daemon.info dnsmasq: using local addresses only for domain lan
+daemon.info dnsmasq: reading /tmp/resolv.conf.auto
+daemon.info dnsmasq: using local addresses only for domain lan
+daemon.info dnsmasq: using nameserver 10.0.0.1#53
+daemon.info dnsmasq: read /etc/hosts - 1 addresses
+daemon.info dnsmasq: read /tmp/hosts/dhcp - 1 addresses
+daemon.info dnsmasq-dhcp: read /etc/ethers - 0 addresses
daemon.err odhcpd: Failed to open routing table: No such file or directory
daemon.err odhcpd: Unable to open raw socket: Address family not supported by protocol
-user.emerg syslog: Instance odhcpd::instance1 s in a crash loop 6 crashes, 0 seconds since last crash
+daemon.info dnsmasq: exiting on receipt of SIGTERM
+daemon.info dnsmasq: started, version 2.71 cachesize 150
+daemon.info dnsmasq: compile time options: no-IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC
+daemon.info dnsmasq-dhcp: DHCP, IP range 192.168.5.100 -- 192.168.5.249, lease time 12h
+daemon.info dnsmasq: using local addresses only for domain lan
+daemon.info dnsmasq: reading /tmp/resolv.conf.auto
+daemon.info dnsmasq: using local addresses only for domain lan
+daemon.info dnsmasq: using nameserver 10.0.0.1#53
+daemon.info dnsmasq: read /etc/hosts - 1 addresses
+daemon.info dnsmasq: read /tmp/hosts/dhcp - 1 addresses
+daemon.info dnsmasq-dhcp: read /etc/ethers - 0 addresses
user.info autowifi: Start signing in...
user.emerg syslog: setting up led USB
user.emerg syslog: setting up led WLAN
user.emerg syslog: setting up led LAN
user.info dhcpcheck: Applying workaround for dhcp/dnsmasq issue. See: https://github.com/Doodle3D/doodle3d-client/issues/66
+daemon.err odhcpd: Failed to open routing table: No such file or directory
+daemon.err odhcpd: Unable to open raw socket: Address family not supported by protocol
user.notice print3d-mgr: Starting print3d manager
-daemon.info dnsmasq: reading /etc/resolv.conf
-daemon.warn dnsmasq: ignoring nameserver 127.0.0.1 - local interface
user.emerg syslog: - init complete -
-authpriv.info dropbear: Child connection from 10.0.0.32:49618
-authpriv.notice dropbear: Password auth succeeded for 'root' from 10.0.0.32:49618
-authpriv.info dropbear: Child connection from 10.0.0.161:57156
+daemon.err odhcpd: Failed to open routing table: No such file or directory
+daemon.err odhcpd: Unable to open raw socket: Address family not supported by protocol
+daemon.err odhcpd: Failed to open routing table: No such file or directory
+daemon.err odhcpd: Unable to open raw socket: Address family not supported by protocol
+user.emerg syslog: Instance odhcpd::instance1 s in a crash loop 6 crashes, 0 seconds since last crash
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+authpriv.info dropbear: Child connection from 10.0.0.102:50090
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+authpriv.notice dropbear: Password auth succeeded for 'root' from 10.0.0.102:50090
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+authpriv.info dropbear: Child connection from 10.0.0.161:57221
+authpriv.notice dropbear: Password auth succeeded for 'root' from 10.0.0.161:57221
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+authpriv.info dropbear: Child connection from 10.0.0.32:50458
authpriv.info dropbear: Exit before auth: Exited normally
-authpriv.info dropbear: Child connection from 10.0.0.161:57161
-authpriv.notice dropbear: Password auth succeeded for 'root' from 10.0.0.161:57161
+authpriv.info dropbear: Child connection from 10.0.0.32:50462
+authpriv.notice dropbear: Password auth succeeded for 'root' from 10.0.0.32:50462
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
authpriv.info dropbear: Exit (root): Error reading: No route to host
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
+daemon.warn dnsmasq-dhcp: no address range available for DHCP request via wlan0
\ No newline at end of file |
Box with issue doesn't get a dhcp ip range?
|
Box with issue:
Box without issue:
|
Reloading the dnsmasq deamon doesn't help
|
Reboot does help. --- left
+++ right
@@ -90,10 +90,7 @@
kern.info kernel: hub 1-0:1.0: USB hub found
kern.info kernel: hub 1-0:1.0: 1 port detected
kern.info kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
-kern.warn kernel: jffs2_scan_eraseblock(): End of filesystem marker found at 0x10000
-kern.warn kernel: jffs2_build_filesystem(): unlocking the mtd device... done.
-kern.warn kernel: jffs2_build_filesystem(): erasing all blocks after the end marker... done.
-kern.notice kernel: jffs2: notice: (312) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
+kern.notice kernel: jffs2: notice: (312) jffs2_build_xattr_subsystem: complete building xattr subsystem, 19 of xdatum (0 unchecked, 18 orphan) and 31 of xref (0 dead, 18 orphan) found.
kern.info kernel: usbcore: registered new interface driver cdc_acm
kern.info kernel: cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
kern.info kernel: Loading modules backported from Linux version master-2014-05-22-0-gf2032ea
@@ -103,10 +100,7 @@
kern.info kernel: usbcore: registered new interface driver usbserial_generic
kern.info kernel: usbserial: USB Serial support registered for generic
kern.info kernel: xt_time: kernel timezone is -0000
-kern.info kernel: usbcore: registered new interface driver ftdi_sio
-kern.info kernel: usbserial: USB Serial support registered for FTDI USB Serial Device
kern.info kernel: cfg80211: Calling CRDA to update world regulatory domain
-kern.info kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
kern.info kernel: cfg80211: World regulatory domain updated:
kern.info kernel: cfg80211: DFS Master region: unset
kern.info kernel: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
@@ -118,6 +112,9 @@
kern.info kernel: cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
kern.info kernel: cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
kern.info kernel: cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
+kern.info kernel: usbcore: registered new interface driver ftdi_sio
+kern.info kernel: usbserial: USB Serial support registered for FTDI USB Serial Device
+kern.info kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
kern.debug kernel: ath: EEPROM regdomain: 0x0
kern.debug kernel: ath: EEPROM indicates default country code should be used
kern.debug kernel: ath: doing EEPROM country->regdmn map search
@@ -176,36 +173,31 @@
daemon.notice netifd: wlan: Lease of 10.0.0.134 obtained, lease time 43200
daemon.info dnsmasq: started, version 2.71 cachesize 150
daemon.info dnsmasq: compile time options: no-IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC
-daemon.info dnsmasq: reading /etc/resolv.conf
-daemon.warn dnsmasq: ignoring nameserver 127.0.0.1 - local interface
+daemon.info dnsmasq-dhcp: DHCP, IP range 192.168.5.100 -- 192.168.5.249, lease time 12h
+daemon.info dnsmasq: using local addresses only for domain lan
+daemon.warn dnsmasq: no servers found in /tmp/resolv.conf.auto, will retry
daemon.info dnsmasq: read /etc/hosts - 1 addresses
+daemon.info dnsmasq: read /tmp/hosts/dhcp - 1 addresses
+daemon.info dnsmasq-dhcp: read /etc/ethers - 0 addresses
daemon.notice netifd: Interface 'wlan' is now up
daemon.err odhcpd: Failed to open routing table: No such file or directory
daemon.err odhcpd: Unable to open raw socket: Address family not supported by protocol
-daemon.info dnsmasq: reading /etc/resolv.conf
-daemon.warn dnsmasq: ignoring nameserver 127.0.0.1 - local interface
-daemon.err odhcpd: Failed to open routing table: No such file or directory
-daemon.err odhcpd: Unable to open raw socket: Address family not supported by protocol
-daemon.info dnsmasq: reading /etc/resolv.conf
-daemon.warn dnsmasq: ignoring nameserver 127.0.0.1 - local interface
-daemon.err odhcpd: Failed to open routing table: No such file or directory
-daemon.err odhcpd: Unable to open raw socket: Address family not supported by protocol
-daemon.err odhcpd: Failed to open routing table: No such file or directory
-daemon.err odhcpd: Unable to open raw socket: Address family not supported by protocol
-user.emerg syslog: Instance odhcpd::instance1 s in a crash loop 6 crashes, 0 seconds since last crash
+daemon.info dnsmasq: reading /tmp/resolv.conf.auto
+daemon.info dnsmasq: using local addresses only for domain lan
+daemon.info dnsmasq: using nameserver 10.0.0.1#53
user.info autowifi: Start signing in...
user.emerg syslog: setting up led USB
user.emerg syslog: setting up led WLAN
user.emerg syslog: setting up led LAN
user.info dhcpcheck: Applying workaround for dhcp/dnsmasq issue. See: https://github.com/Doodle3D/doodle3d-client/issues/66
user.notice print3d-mgr: Starting print3d manager
-daemon.info dnsmasq: reading /etc/resolv.conf
-daemon.warn dnsmasq: ignoring nameserver 127.0.0.1 - local interface
+daemon.err odhcpd: Failed to open routing table: No such file or directory
+daemon.err odhcpd: Unable to open raw socket: Address family not supported by protocol
user.emerg syslog: - init complete -
-authpriv.info dropbear: Child connection from 10.0.0.32:49618
-authpriv.notice dropbear: Password auth succeeded for 'root' from 10.0.0.32:49618
-authpriv.info dropbear: Child connection from 10.0.0.161:57156
-authpriv.info dropbear: Exit before auth: Exited normally
-authpriv.info dropbear: Child connection from 10.0.0.161:57161
-authpriv.notice dropbear: Password auth succeeded for 'root' from 10.0.0.161:57161
-authpriv.info dropbear: Exit (root): Error reading: No route to host
+daemon.err odhcpd: Failed to open routing table: No such file or directory
+daemon.err odhcpd: Unable to open raw socket: Address family not supported by protocol
+authpriv.info dropbear: Child connection from 10.0.0.32:52554
+daemon.err odhcpd: Failed to open routing table: No such file or directory
+daemon.err odhcpd: Unable to open raw socket: Address family not supported by protocol
+user.emerg syslog: Instance odhcpd::instance1 s in a crash loop 6 crashes, 0 seconds since last crash
+authpriv.notice dropbear: Password auth succeeded for 'root' from 10.0.0.32:52554
\ No newline at end of file |
I've flashed the box back to 0.10.5 (without keeping settings), connected it to our WiFi, updated to 0.10.6. It got back online, without any dns/internet issues. |
I have a box that's connected to our WiFi network, but can't use the internet.
ping: bad address 'google.com'
)The text was updated successfully, but these errors were encountered: