Skip to content

A WS2812b based Status of Octoprint, it shows the Temperature of the bed between 30° and 60° and also the printjob status

Notifications You must be signed in to change notification settings

DominikJosh/Octoprint-Status-LED

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

26 Commits
 
 
 
 
 
 

Repository files navigation

Octoprint-Status-LED

A WS2812b based Status of Octoprint, it shows the Temperature of the bed between 30° and 60° and also the printjob status. It polls the Ocotoprint REST API periodically via a HTTP GET request. There are some delay between the real state of the printer and the of the LED, this comes do the simple polling approch. Faster polling result in lower delay but also increases the load on the ESP and on the wifi or network in general (on Octoprint too).

Security Warning: This sketch sends unencrypted GET requests with the octoprint apikey in cleartext in the request header through your network. Although this isn't that big of a security risk though, if your octoprint is not visible to the internet (which i did not recommend anyway)

Description:

The color of the lamp will show you the status as follows:

-fade yellow: booting / connecting
-rainbowcycle: Printer is ready
-if false: white light -blue to red: Printer is heating the bed shows every 5°C from 30-60°C
-blue to green: Printer is printing, shows progress in 25%
-if false: white light -fade blue: Print is paused
-fade red: error occurred
-flashing white: HTTP Code Unauthorized
-fade green: HTTP Code Conflict

It will also output small informations on the serial line.

Hardware

Electronics
BOM:

1x Wemos d1 mini (or any esp8266 with 4Mb flash)
1x WS2812b RGB Led
1x Wires (3 cores, about 3-4cm)
1x Micro USB Cable and 5V Power supply

The Arduino IDE Way

Download/Clone this Repository and unpack it on your favourite folder

Download and install the latest version of the Arduino IDE for your system https://www.arduino.cc/en/Main/Software

Add ESP Board Manager to your IDE : Therefore open File>Preferences After "Additional Boards Manager URLs" insert:
http://arduino.esp8266.com/stable/package_esp8266com_index.json

Then open Tools>Board>Boards Manager Search for ESP Install latest ESP8266 Board Manager

Add Additional Libraries Therefore open Sketch>Include Library>Manage Libraries... Search for Adafruit Neopixel and install latest Adafruit Neopixel library
Search ArduinoJson and install latest ArduinoJson
Restart Arduino IDE
Open config.h and add your configuration
Choose your board and com port
Upload

Configuration

There are 4 main configurations in the config.h file, which must be made by user...

Wifi SSID const char* SSID = "myWifi"; the name of your Wireless Network

Wifi Password const char* SSID = "myWifi"; the password to your Wireless Network

Octoprint API key const char* APIKEY = "FA9131811AF94AB48C6A9ED45AEF60FC"; like a password to the Octoprint REST Api {TBD} /doc/img/sc-octocprint-api-key.PNG You can obtain your API key in the Octoprint Webinterface in the settings under API. More info about the Octoprint API key in the API Documentation: http://docs.octoprint.org/en/master/api/general.html#authorization

Octoprint Ip Address the Network address to your Octoprint. Same as you need to gain acces to your web interface of octoprint.

Example User Config:

#define LEDPIN D2 // where you Led is connected
const char* SSID = "myWifi";
const char* WPWD = "wifipassword";
const char* APIKEY = "FA9131811AF94AB48C6A9ED45AEF60FC";
String OCTOIP = "192.168.1.3";
uint16_t pollInterval = 500;
const uint8_t lenght = 8;
int statusShow = true;

About

A WS2812b based Status of Octoprint, it shows the Temperature of the bed between 30° and 60° and also the printjob status

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published