Engine_Config_Template.cfg

PART
{
	module = Part
	name = ROE-LR89-BDB				// Naming Convention: ROE-NameOfEngine-Mod
	author = CobaltWolf, Pap
	
	category = Engine
	subcategory = 0
	RSSROConfig = true
	RP0conf = true
	
	crashTolerance = 10
	maxTemp = 673.15
	skinTemp = 773.15
	fuelCrossfeed = true
	breakingForce = 10000
	breakingTorque = 10000
	
	//  ============================================================================
	//	Update Below
	//  ============================================================================
	
	MODEL
	{
		// All assets stored in ROEngines/Assets/MOD/
		// The final part of the name is the .MU file without a file extension
		model = ROEngines/Assets/BDB/Atlas/bluedog_Atlas_LR89
		
		// Set the scale (higher or lower) to go from KSP size to RO size
		scale = 1.6256, 1.6256, 1.6256
	}
	
	scale = 1.0
	rescaleFactor = 1.0
	
	// These need to be modified. Use the one from the engine config you are basing
	//	it off of and multiply it by the scale you apply above
	node_stack_top = 0.0, 0.499, 0.0, 0.0, 1.0, 0.0, 1
	node_stack_bottom = 0.0, -1.645, 0.0, 0.0, -1.0, 0.0, 1
	
	// stack, srfAttach, allowStack, allowSrfAttach, allowCollision
	// These shouldn't really be changed unless you have good reason
	attachRules = 1,1,1,0,0	
	
	// Add the title, Manufacturer and Description, but to be honest, these are
	// not that important
	title = LR89
	manufacturer = Rocketdyne
	description = Kerolox gas-generator engine that served as booster for Atlas (as -89, MA-x sysem) and main engine for Thor/Thor-Delta/Delta and Jupiter/Juno II rockets (as -79, MB-x system). Late model LR89s were upgraded with RS-27 components for higher efficiency, whereas the RS-27 itself was used on Delta by that point. LR89 configs are comparable to similar-era -79 configs, since they were the same engine underneath.
	
	// Add good tags
	tags = atlas, booster, lr89, lr-89, lr, 89
	
	// engineType is important, this is the Global Engine Config that this engine uses
	engineType = LR89
	stagingIcon = LIQUID_ENGINE			// Or SOLID_BOOSTER
	stageOffset = 1			// Always 1
    childStageOffset = 1	// Always 1
	
	// Leave this section, we set this in RP-1
	TechRequired = unlockParts
	cost = 150
	entryCost = 1
	
	
	// This is going to be the one that looks the most strange
	// The way the global engine configs work, ALL we need is the name of the
	// thrustVectorTransformName from the ModuleEngines*
	// NOTHING else is important, no matter what you see from the other configs
	// that you will come across in RO
	MODULE
	{
		name = ModuleEnginesRF
		thrustVectorTransformName = thrustTransform
	}
	
	// There will usually be one in the config, overwrite this
	MODULE
	{
        name = FXModuleAnimateThrottle
        animationName = LR89_Heat_Anim
        dependOnEngineState = True
        responseSpeed = 0.001
	}
	
	// Add this when it is proper
	MODULE
	{
		name = ModuleGimbal
		gimbalResponseSpeed = 16
		useGimbalResponseSpeed = true
		gimbalTransformName = gimbalTransform
		gimbalRange = 5
	}
	
	// You might see these, add them
	MODULE
	{
	
		name = FXModuleLookAtConstraint

		CONSTRAINLOOKFX
		{
		targetName = Gimbal1_Upper
		rotatorsName = Gimbal1_Lower
		}
		CONSTRAINLOOKFX
		{
		targetName = Gimbal1_Lower
		rotatorsName = Gimbal1_Upper
		}
		CONSTRAINLOOKFX
		{
		targetName = Gimbal2_Lower
		rotatorsName = Gimbal2_Upper
		}
		CONSTRAINLOOKFX
		{
		targetName = Gimbal2_Upper
		rotatorsName = Gimbal2_Lower
		}

	}
	
	// Every engine should have one of these
	MODULE
	{
		name = ModuleSurfaceFX
		thrustProviderModuleIndex = 0
		fxMax = 0.5
		maxDistance = 30
		falloff = 1.5
		thrustTransformName = thrustTransform
	}
	
}