diff --git a/infra-as-code/bicep/modules/vwanConnectivity/generateddocs/vwanConnectivity.bicep.md b/infra-as-code/bicep/modules/vwanConnectivity/generateddocs/vwanConnectivity.bicep.md
index 3f487784a..f14cc79b1 100644
--- a/infra-as-code/bicep/modules/vwanConnectivity/generateddocs/vwanConnectivity.bicep.md
+++ b/infra-as-code/bicep/modules/vwanConnectivity/generateddocs/vwanConnectivity.bicep.md
@@ -18,7 +18,7 @@ parVirtualWanName | No       | Prefix Used for Virtual WAN.
 parVirtualWanLock | No       | Resource Lock Configuration for Virtual WAN.  - `kind` - The lock settings of the service which can be CanNotDelete, ReadOnly, or None. - `notes` - Notes about this lock.  
 parVirtualWanHubName | No       | Prefix Used for Virtual WAN Hub.
 parVirtualWanHubDefaultRouteName | No       | The name of the route table that manages routing between the Virtual WAN Hub and the Azure Firewall.
-parVirtualWanHubs | No       | Array Used for multiple Virtual WAN Hubs deployment. Each object in the array represents an individual Virtual WAN Hub configuration. Add/remove additional objects in the array to meet the number of Virtual WAN Hubs required.  - `parVpnGatewayEnabled` - Switch to enable/disable VPN Gateway deployment on the respective Virtual WAN Hub. - `parExpressRouteGatewayEnabled` - Switch to enable/disable ExpressRoute Gateway deployment on the respective Virtual WAN Hub. - `parAzFirewallEnabled` - Switch to enable/disable Azure Firewall deployment on the respective Virtual WAN Hub. - `parVirtualHubAddressPrefix` - The IP address range in CIDR notation for the vWAN virtual Hub to use. - `parHubLocation` - The Virtual WAN Hub location. - `parHubRoutingPreference` - The Virtual WAN Hub routing preference. The allowed values are `ASN`, `VpnGateway`, `ExpressRoute`. - `parVirtualRouterAutoScaleConfiguration` - The Virtual WAN Hub capacity. The value should be between 2 to 50. - `parVirtualHubRoutingIntentDestinations` - The Virtual WAN Hub routing intent destinations, leave empty if not wanting to enable routing intent. The allowed values are `Internet`, `PrivateTraffic`.  
+parVirtualWanHubs | No       | Array Used for multiple Virtual WAN Hubs deployment. Each object in the array represents an individual Virtual WAN Hub configuration. Add/remove additional objects in the array to meet the number of Virtual WAN Hubs required.  - `parVpnGatewayEnabled` - Switch to enable/disable VPN Gateway deployment on the respective Virtual WAN Hub. - `parExpressRouteGatewayEnabled` - Switch to enable/disable ExpressRoute Gateway deployment on the respective Virtual WAN Hub. - `parAzFirewallEnabled` - Switch to enable/disable Azure Firewall deployment on the respective Virtual WAN Hub. - `parVirtualHubAddressPrefix` - The IP address range in CIDR notation for the vWAN virtual Hub to use. - `parHubLocation` - The Virtual WAN Hub location. - `parHubRoutingPreference` - The Virtual WAN Hub routing preference. The allowed values are `ASPath`, `VpnGateway`, `ExpressRoute`. - `parVirtualRouterAutoScaleConfiguration` - The Virtual WAN Hub capacity. The value should be between 2 to 50. - `parVirtualHubRoutingIntentDestinations` - The Virtual WAN Hub routing intent destinations, leave empty if not wanting to enable routing intent. The allowed values are `Internet`, `PrivateTraffic`.  
 parVpnGatewayLock | No       | Resource Lock Configuration for Virtual WAN Hub VPN Gateway.  - `kind` - The lock settings of the service which can be CanNotDelete, ReadOnly, or None. - `notes` - Notes about this lock.  
 parExpressRouteGatewayLock | No       | Resource Lock Configuration for Virtual WAN Hub ExpressRoute Gateway.  - `kind` - The lock settings of the service which can be CanNotDelete, ReadOnly, or None. - `notes` - Notes about this lock.  
 parVirtualWanHubsLock | No       | Resource Lock Configuration for Virtual WAN Hub.  - `kind` - The lock settings of the service which can be CanNotDelete, ReadOnly, or None. - `notes` - Notes about this lock.  
@@ -162,7 +162,7 @@ Array Used for multiple Virtual WAN Hubs deployment. Each object in the array re
 - `parAzFirewallEnabled` - Switch to enable/disable Azure Firewall deployment on the respective Virtual WAN Hub.
 - `parVirtualHubAddressPrefix` - The IP address range in CIDR notation for the vWAN virtual Hub to use.
 - `parHubLocation` - The Virtual WAN Hub location.
-- `parHubRoutingPreference` - The Virtual WAN Hub routing preference. The allowed values are `ASN`, `VpnGateway`, `ExpressRoute`.
+- `parHubRoutingPreference` - The Virtual WAN Hub routing preference. The allowed values are `ASPath`, `VpnGateway`, `ExpressRoute`.
 - `parVirtualRouterAutoScaleConfiguration` - The Virtual WAN Hub capacity. The value should be between 2 to 50.
 - `parVirtualHubRoutingIntentDestinations` - The Virtual WAN Hub routing intent destinations, leave empty if not wanting to enable routing intent. The allowed values are `Internet`, `PrivateTraffic`.
 
diff --git a/infra-as-code/bicep/modules/vwanConnectivity/samples/baseline.sample.bicep b/infra-as-code/bicep/modules/vwanConnectivity/samples/baseline.sample.bicep
index 62c363c9f..60fb08727 100644
--- a/infra-as-code/bicep/modules/vwanConnectivity/samples/baseline.sample.bicep
+++ b/infra-as-code/bicep/modules/vwanConnectivity/samples/baseline.sample.bicep
@@ -29,7 +29,7 @@ module minimum_vwan_conn '../vwanConnectivity.bicep' = {
         parAzFirewallEnabled: true
         parVirtualHubAddressPrefix: '10.100.0.0/23'
         parHubLocation: 'centralus'
-        parHubRoutingPreference: 'ExpressRoute' //allowed values are 'ASN','VpnGateway','ExpressRoute'
+        parHubRoutingPreference: 'ExpressRoute' //allowed values are 'ASPath','VpnGateway','ExpressRoute'
         parVirtualRouterAutoScaleConfiguration: 2 //minimum capacity should be between 2 to 50
         parVirtualHubRoutingIntentDestinations: []
       } ]
diff --git a/infra-as-code/bicep/modules/vwanConnectivity/vwanConnectivity.bicep b/infra-as-code/bicep/modules/vwanConnectivity/vwanConnectivity.bicep
index 6bed7bb05..156f4cc39 100644
--- a/infra-as-code/bicep/modules/vwanConnectivity/vwanConnectivity.bicep
+++ b/infra-as-code/bicep/modules/vwanConnectivity/vwanConnectivity.bicep
@@ -17,8 +17,8 @@ type virtualWanOptionsType = ({
   @sys.description('The Virtual WAN Hub location.')
   parHubLocation: string
 
-  @sys.description('The Virtual WAN Hub routing preference. The allowed values are `ASN`, `VpnGateway`, `ExpressRoute`.')
-  parHubRoutingPreference: ('ExpressRoute' | 'VpnGateway' | 'ASN')
+  @sys.description('The Virtual WAN Hub routing preference. The allowed values are `ASPath`, `VpnGateway`, `ExpressRoute`.')
+  parHubRoutingPreference: ('ExpressRoute' | 'VpnGateway' | 'ASPath')
 
   @sys.description('The Virtual WAN Hub capacity. The value should be between 2 to 50.')
   @minValue(2)
@@ -121,7 +121,7 @@ param parVirtualWanHubDefaultRouteName string = 'default-to-azfw'
 - `parAzFirewallEnabled` - Switch to enable/disable Azure Firewall deployment on the respective Virtual WAN Hub.
 - `parVirtualHubAddressPrefix` - The IP address range in CIDR notation for the vWAN virtual Hub to use.
 - `parHubLocation` - The Virtual WAN Hub location.
-- `parHubRoutingPreference` - The Virtual WAN Hub routing preference. The allowed values are `ASN`, `VpnGateway`, `ExpressRoute`.
+- `parHubRoutingPreference` - The Virtual WAN Hub routing preference. The allowed values are `ASPath`, `VpnGateway`, `ExpressRoute`.
 - `parVirtualRouterAutoScaleConfiguration` - The Virtual WAN Hub capacity. The value should be between 2 to 50.
 - `parVirtualHubRoutingIntentDestinations` - The Virtual WAN Hub routing intent destinations, leave empty if not wanting to enable routing intent. The allowed values are `Internet`, `PrivateTraffic`.