Skip to content

Latest commit

 

History

History
182 lines (119 loc) · 10.2 KB

README.md

File metadata and controls

182 lines (119 loc) · 10.2 KB
Raw

augur-core

Build Status

Important: V2 Development Moved to New Location

This repo contains the current Augur V1 contract code. All new contract development is available in the new Augur monorepo.

About

Smart contracts for Augur, a decentralized prediction market platform on the Ethereum blockchain.

Quick Setup

If you just want to clone the repo and quickly have a couple local proof of authority networks (Geth/Clique and Parity/Aura) running with the contracts deployed then you can just clone the repo and run:

docker-compose -f source/support/test/integration/docker-compose-[geth/parity].yml up --build --force-recreate
  • Parity HTTP RPC will be available on localhost port 47622.
  • Geth HTTP RPC will be available on localhost port 47624.
  • An abundant supply of ETH is available using the private key 0xfae42052f82bed612a724fec3632f325f377120592c75bb78adfcceae6470c5a.
  • The log output will let you know what the address of the various Augur contracts are.

Installation

You need system-wide installations of Python 2.7.6+, Node.js 8+, and Solidity 0.4.20. (Or Docker; see below.) Install the dependencies:

npm install npx
npm install
pip install -r requirements.txt

Note: on macOS, you need to use virtualenv or homebrew Python to work around System Integrity Protection.

Deployment

Solidity contract deployment is handled by ContractDeployer.ts and the wrapper programs located in source/deployment. This deployment framework allows for incremental deploys of contracts to a given controller (specified via a configuration option). This allows us to deploy new contracts without touching the controller, effectively upgrading the deployed system in-place.

  • Main Code

    • source/libraries/ContractCompiler.ts - All logic for compiling contracts, generating ABI
    • source/libraries/ContractDeployer.ts - All logic for uploading, initializing, and whitelisting contracts, generating addresses and block number outputs.

  • Configuration

    • source/libraries/CompilerConfiguration.ts
    • source/libraries/DeployerConfiguration.ts
    • source/libraries/NetworkConfiguration.ts -

  • Wrapper programs

    • source/deployment/compileAndDeploy.ts - Compiles and Uploads contracts in one step. Useful for integration testing.
    • source/deployment/compiledContracts.ts - Compile contract source (from source/contracts) and output contracts.json and abi.json. Outputs to output/contracts or CONTRACTS_OUTPUT_ROOT if defined.
    • source/deployment/deployNetworks.ts - Application that can upload / upgrade all contracts, reads contracts from CONTRACTS_OUTPUT_ROOT, and uses a named network configuration to connect to an ethereum node. The resulting contract addresses are stored in output/contracts or ARTIFACT_OUTPUT_ROOT if defined.

Tests

The tests directory (augur-core/tests) contain tests and test fixtures to test the various functionalities present in Augur, including trading, reporting, and wcl tests.

  • conftest.py -- contains the class ContractFixture, which deals with caching compiled contracts, signatures, etc. as well as resetting the blockchain before each test.
  • delegation_sandbox.py -- tests the delegator contract.
  • sandbox.py -- used for testing miscellaneous Solidity behaviors
  • reporting -- contains tests for reporting purposes.
  • trading -- contains tests for trading purposes.
  • solidity_test_helpers -- small contracts to help run tests.
  • test_controller.py -- tests controller functionalities.
  • test_mutex.py -- tests mutex functionalities.
  • test_helpers.py -- tests the controller, safeMath, and assertNoValue macros.
  • test_legacyRep.py -- tests for legacyRepToken's functionalities.
  • utils.py -- contains useful functions for testing, such as conversion between different data types.
  • wcl-in-python.py -- contains functions for making and taking various types of bids.
  • wcl.txt -- explains tests for the various situations when filling a bid and filling an ask.

Use pytest to run Augur's test suite:

pytest tests

This executes all the tests. To run a test individually, run the following:

pytest path/to/test_file.py -k 'name_of_test'

When writing tests, it is highly recommended to make use of the ContractFixtures class for "placeholder" variables. Python's unit testing framework comes handy here; encapsulate tests within functions that start with "test_", and use assert statements when testing for certain values. Parameterized tests are recommended as well to test various possibilities and edge cases.

Coverage Report

To generate a coverage report simply run the command:

node --max-old-space-size=12288 source/tools/generateCoverageReport.js

The results will be displayed on the command line and a much richer HTML output will be generated in the coverage folder of the project.

Make sure you actually have enough memory to run the command above. The coverage tool being used will pull a massive file into memory to generate the report and will fail with an OOM exception if not enough is available. Since tests take about 40 minutes to run with coverage enabled this will be a sad event.

Docker

augur-core can optionally be built, run, and tested using Docker. A number of Docker commands are included as npm scripts, which map to the non-Dockerized versions where this makes sense. Docker commands beginning with docker:run execute the command within the Docker image. Docker commands without run (e.g. docker:test) first build the image, then execute docker:run:<command>.

Build

npm run docker:build

Test

# With a pre-built image
npm run docker:run:test:unit:all

# Build and run all unit tests and integration tests
npm run docker:test

# Build and run just integration tests (using Geth)
npm run docker:run:test:integration:geth
# Build and run just integration tests (using Parity)
npm run docker:run:test:integration:parity

For quicker iteration on integration tests follow the instructions here to run tests locally against a node running in docker:

augur-core/.vscode/launch.json

Lines 28 to 35 in 7272124

// uncomment one of the following and run `docker-compose up --build --force-recreate --abort-on-container-exit parity-dev-node` then you can debug tests against any chain from within VSCode
// ** Local **
// "env": {
// "ETHEREUM_HOST": "localhost",
// "ETHEREUM_PORT": "8545",
// "ETHEREUM_GAS_PRICE_IN_NANOETH": "1",
//// "ETHEREUM_PRIVATE_KEY": "0xe2b0241b73cd78d450f85eca67188fb884e7ebe961f8981814474c500d581952"
// },

If the contracts aren't changing, after the first run you can add "AUGUR_CONTROLLER_ADDRESS": "..." to the env and it will even skip re-uploading the contracts with each run of the integration tests.

Running Oyente

Install Oyente locally. This can be done by following the instructions on their GitHub: https://github.com/melonproject/oyente

Run the oyente script with this command to get the output for all contracts:

python source/tools/runOyente.py -p

Source code organization

Augur's smart contracts are organized into four folders:

  • source/contracts/factories: Constructors for universes, markets, fee windows, etc.
  • source/contracts/libraries: Data structures used elsewhere in the source code.
  • source/contracts/reporting: Creation and manipulation of universes, markets, fee windows, and reporting-related tokens.
  • source/contracts/trading: Functions to create, view, and fill orders, to issue and close out complete sets of shares, and for traders to claim proceeds after markets are closed.

Additional notes

General information about Augur

Terminology

Augur Terminology

EVM numbers are always integers

There are no floating-point numbers in the EVM, only integers. Therefore, Ether and Reputation values in contracts are always represented in units of wei (i.e., indivisible units of 10^-18 Ether or 10^-18 Reputation).

Reporting diagrams

Worst-case-loss escrow for trades

Verifying the REP contract on the main Ethereum network

On Augur, each Universe has a Reputation Token Contract that is created by the Universe, which is uniquely associated with that Universe. The Reputation token contract is technically a "Delegator" Contract, which simply calls through to its delegation target contract, the Verified Reputation Token Contract.

You can verify that the REP token contract is a Delegator by verifying the ReputationTokenFactory is what created the contract.

To do this, go to the new REP contract 0x1985365e9f78359a9b6ad760e32412f4a445e862. Then go to its creator 0x8fee0da3a35f612f88fb58d7028d14c7d99a3643. Then click on internal transactions and you'll see this 0x44c09f8eeff886723b79890e14743192a8c8d8a8eac158ed17600c94e502cce8 transaction which creates the initial universe.

Then click on internal on that page and you'll see here that that contract created the REP token contract.

You can verify that the REP Token contract is delegating to the verified REP token contract target by calling lookup on the Controller with the string ReputationToken.