Do not import into ankemake studio v1.5.21

[iTowerPrime]

When you import the bundle into ankermake studio v1.5.21 is says '0 presets were successfully imported'. Imports 15 profiles into prusaslicer though.

[Emmo213]

Subscribing because I have the same issue.

[evilmouse69]

Same

[YepifanovAS]

Unfortunately, Ankermake Studio 1.5.21 can not import even it's own exported bundle config files. So, I guess, it is not a CE profiles issue.

[eekboom]

1,5,22 still has the same problem.
I am really annoyed at AnkerMake, first they remove the TPU profile, then they break the import feature.
Now what?

[Forti4040]

I reverted back to 1.5.16 to import a config bundle. Then I updated to 1.5.22 and they were all still there. Only thing that worked for me so far.

[shadowstejo]

Issue on ankermake side, nothing to fix

[LanHikari22]

I reverted back to 1.5.16 to import a config bundle. Then I updated to 1.5.22 and they were all still there. Only thing that worked for me so far.

This helped me. However, I could not find 1.15.16. I reverted to 1.15.10, which can be found at https://github.com/ankermake/AnkerMake-PrusaSlicer-Release/releases/tag/v1.5.10 and then imported the presets. However, I do not seem to retain them after going back to 1.5.22.

Thanks!

[spuder]

I'm also running into this.

I've tried modifying the .ini file to only include a single profile with no luck. I don't think this is a problem with the profile, I think it is an AnkerMake studio problem.

[antipop001]

I reverted back to 1.5.16 to import a config bundle. Then I updated to 1.5.22 and they were all still there. Only thing that worked for me so far.
@Forti4040 Would you have a link to 1.5.16?

[robertbaker]

@Forti4040 if it worked, please export your profiles/bundle config and post a gist, it's possible the format changed and if you do this, there is a high possibility others on the latest version can use it without doing your workaround, thanks.

[stanleylai]

I followed @Forti4040's steps and downgraded to 1.5.10, imported the bundle, and upgraded back to 1.5.23. The AMCE configs still show up for me, and exported to this gist https://gist.github.com/stanleylai/8a40f725e83df154be52a55352718dfe

Haven't tried importing it to a fresh install, so no idea if it still works importing directly to 1.5.23.

[elmatator]

@stanleylai i tried to import it to 1.5.23 but it failt. Now i downgraded, imported and upgraded again. This works fine. Btw if anyone wants to print directly out of PrusaSlicer there is a project to do so with the M5C. I got it working but only with the exiles 1.1 modification. Sadly u need to keep PrusaSlicer running while printing, its not possible to upload the gcode to the printer itself.

seems only for M5: https://github.com/Ankermgmt/ankermake-m5-protocol
works with M5C: https://github.com/anselor/ankermake-m5-protocol/tree/exiles-1.1

[antipop001]

Can someone send me a link to the downgrade version?

…

On Mon, Oct 21, 2024, 2:52 PM elmatator ***@***.***> wrote: @stanleylai <https://github.com/stanleylai> i tried to import it to 1.5.23 but it failt. Now i did the downgrade, import and upgraded again. This works. — Reply to this email directly, view it on GitHub <#39 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ACDENOOMMQH5WQNBCFSF6TTZ4VLPFAVCNFSM6AAAAABGPCCQM6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDIMRXGU4DSOJYGU> . You are receiving this because you are subscribed to this thread.Message ID: <Ankermgmt/prusaslicer-ankermake-ce-profiles/issues/39/2427589985@ github.com>

[elmatator]

I reverted back to 1.5.16 to import a config bundle. Then I updated to 1.5.22 and they were all still there. Only thing that worked for me so far.

This helped me. However, I could not find 1.15.16. I reverted to 1.15.10, which can be found at https://github.com/ankermake/AnkerMake-PrusaSlicer-Release/releases/tag/v1.5.10 and then imported the presets. However, I do not seem to retain them after going back to 1.5.22.

Thanks!

Here you go 😉

[Goldstms]

Worked perfectly for me too, thanks.