A GPL open-source DIY ECU
current binaries are always available at http://rusefi.com/build_server/
| Release date | Revision | Details |
|---|---|---|
| 01/29/2018 | r15514 | improvement #215: CJ125 wideband contoller |
| 01/23/2018 | r15442 | improvement #463: ChibiOS 17 / 4 |
| 01/07/2018 | r14952 | usability & minor bugfix #532 idle defaults are broken |
| 12/17/2017 | r14892 | bugfix #513: console: erase on older chips does not work |
| 11/26/2017 | r14789 | bugfix #500: set_rpn_expression command is broken |
| 11/23/2017 | r14779 | bugfix #497: engine does not start with SD card |
| 11/19/2017 | r14766 | improvement #496: console flasher to support older boards |
| 11/19/2017 | r14760 | improvement #495: incomppatible change - larger settings area |
| 11/06/2017 | r14733 | improvement #487: single-point injection mode |
| 10/26/2017 | r14700 | improvement #385: narrow band to wide band conversion table |
| 08/31/2017 | improvement #442: ADC_VCC should be configurable | |
| 07/24/2017 | r14513 | bugfix #307: TS bench test blinks three times |
| 07/13/2017 | r14476 | bugfix #461: SAXParserException on console start-up due to damaged settings.xml file |
| 07/09/2017 | r14473 | improvement: IAC solenoid frequencty changeable on the fly |
| 06/19/2017 | r14393 | bugfix: pinMode, milMode |
| 05/27/2017 | r14221 | improvement: ochGetCommand to support offset and count |
| 05/05/2017 | r13974 | bugfix #404: 36/1 FATAL error: angle range trgSync |
| 05/03/2017 | r13967 | improvement: ChibiOS 3.2 |
| 04/06/2017 | r13759 | major improvement #72: ChibiOS 3.1 |
| 03/26/2017 | r13330 | super annoying bug #336 fixed |
| 03/20/2017 | r13233 | improvements #375 & #376: hard FPU mode & migrating to fresh version of arm gcc |
| 03/19/2017 | r13223 | bugfix #374: persistent configuration starts to touch firmware - settings would need to be reloaded |
| 03/09/2017 | r13146 | bugfix #370: duty cycle vs error code 6050 |
| 03/06/2017 | r13123 | bugfix #363: 2/1 skipped wheel is a corner-case |
| 03/05/2017 | r13108 | bugfix #363: trigger front only processing |
| 02/22/2017 | r12980 | bugfix: false error message in case of single coil or simultaneous injection |
| 02/22/2017 | r12973 | unused property 'custom Use Rise Edge' removed |
| 02/22/2017 | r12972 | protocol signature changed to 'v0.02' (this would happen from time to time to ensure version match between console and TS project |
| 02/20/2017 | r12939 | https://github.com/rusefi/rusefi is now the official primary repository |
| 02/18/2017 | r11565 | improvement: level1 default brown out https://sourceforge.net/p/rusefi/tickets/354/ |
| 02/18/2017 | r11554 | bugfix: rusEfi console program/erase buttons fixed with ST-LINK 2.1 |
| 12/09/2016 | r10991 | bugfixes, bugfixes, bugfixes & releave 1.0 |
| 02/15/2016 | r9600 | automatic warm-up fuel correction, performance improvements |
| 08/31/2015 | r8725 | acceleration fuel correction, console improvements |
| 07/06/2015 | r8554 | more CAN, better console, bugfixes, performance |
| 04/26/2015 | r7938 | vehicle speed sensor, stepper idle valve, lots of improvements |
| 11/13/2014 | r5327 | ChibiOS/RT 2.6.6, better cold start logic, bugfixes, bugfixes, bugfixes... |
| 06/12/2014 | r3477 | Precise event scheduling, protocol selection |
| 03/26/2014 | r2413 | C++, refactoring & improvements |
| 02/23/2013 | r1777 | trigger is now configurable via TunerStudio |
| 01/30/2014 | r1309 | true trigger angles, VBatt signal |
| 01/12/2014 | r1007 | refactoring, refactoring & refactoring |
| 12/19/2013 | r605 | ignition control & a little bit of CAN bus |
| 11/08/2013 | r100 | Tuner Studio fuel map tuning, fuel pump control |
| 10/14/2013 | r39 | USB serial bug, missing IAR files, self-containted Makefile |
| 10/13/2013 | r33 | IAR project file |
| 10/04/2013 | r26 | Patched ChibiOS/RT 2.6.1 sources are now included |
| 09/23/2013 | r20 | Tuner Studio integration, configuraton persistence |
| 08/30/2013 | r14 | initial documentation & refactoring. tunerstudio integration |
| 08/03/2013 | r13 | wideband O2 input, better idling algorithm, serial-over-USB |
| 07/05/2013 | r10 | Second CKP, sequential injection. |
| 06/19/2013 | r9 | Initial version - batch injection & ignition with advance table lookup. |
- Wiki: http://rusefi.com
- Forum http://rusefi.com/forum
- Doxygen documentation is available at http://rusefi.com/docs/html
- General source code Q&A is at http://rusefi.com/forum/viewtopic.php?f=5&t=10
- Facebook https://www.facebook.com/rusEfiECU
- YouTube: https://www.youtube.com/user/rusefi
We now use submodules:
git submodule update --init